Illuminate harsh, wet areas, even outside in extreme weather—these lights are often used on ship building ports. Rated NEMA 4X and UL marine listed, they’re sealed against heavy rain and washdowns, and they won’t corrode from salt water or cleaning chemicals. They’re also IP rated to stay sealed in dusty conditions. And with a durable glass lens, they’re rated IK08 for impact resistance. They’ll work in temperatures from -40° F to 145° F. Bright enough for environments that require high visibility, these lights have a cool appearance that highlights white and blue tones.

A quick-connect mount lets you wire these lights to an outlet box without having to hold them in place. First, wire the mount to your outlet box with a 3/4" conduit connector. Then twist the light into the mount to lock it in place.

These lights are DLC (DesignLight Consortium) listed, so they’ve been tested to confirm their energy efficiency. They’re also CE Marked to meet European safety standards.

For technical drawings and 3-D models, click on a part number.

Also known as troffers, these lights fit flush into most drop-ceiling grids. They’re fully sealed with an airtight gasket, so they’re rated IP65 for protection against low-pressure washdowns, humidity, and dust. Install them anywhere that requires frequent cleaning, even an ISO Class 5 clean room. They also meet NSF/ANSI 2, so you can use them in food processing areas with splashing liquid. These lights won’t shatter and contaminate your area—they’re rated IK10, the highest rating for impact protection. And since they’re IC rated, you won’t risk a fire if you install them in direct contact with insulation.

Casting a neutral light dispersed by a frosted lens, these lights won’t cause glare on equipment. The lens is made of acrylic to resist scratching and yellowing.

These lights are UL listed or CSA certified for hazardous locations where flammable/combustible gases, vapors, and liquids may be present. They have a sealed lens and can be hardwired to operate on any of the voltages listed.

Styles 1-2 can be used where hazardous material occurs infrequently. They have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. Style 1 are housed in durable stainless steel. Style 2 have an acrylic lens that won’t turn yellow over time.

Style 3 withstand hazardous material under normal operating conditions. Housed in lightweight aluminum, they have built in LEDs that last longer, are more efficient, and generate less heat than other light technologies.

Lights with a cool appearance highlight white/blue tones that are good for inspecting.

All are IP66 rated for protection from washdowns. IP67 rated lights can be briefly submerged. NEMA 4X rated lights protect their parts from corrosion.

Also known as jelly jar lights. These fixtures have a heat-resistant lens and a guard that protects the lens from breaking. They are CSA certified for hazardous locations where flammable/combustible gases, vapors, and liquids may be present. They are rated NEMA 4X for protection against corrosion and washdowns. Lights are sealed to keep moisture out. They can be hardwired to operate on any of the voltages listed. Some work with LED or incandescent bulbs (sold separately).

Styles 1, 2, 3, 5, and 6 can be used in environments where ignitable concentrations of flammable/combustible gases, vapors, and liquids or combustible dust occur infrequently, such as in the case of an accidental spill or failure of a ventilation system, and where combustible/ignitable fibers or flyings are present under normal operating conditions and/or during frequent equipment maintenance or failure. Rated for Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III, Divisions 1 and 2, these lights withstand acetylene, hydrogen, ethylene, propane, carbonaceous dusts, and nonconductive dusts.

Styles 4 and 7 can be used in environments where ignitable concentrations of hazardous material are present under normal operating conditions, and/or during frequent equipment maintenance or failure. Rated for Class I, Divisions 1 and 2, Groups C and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2, these lights withstand ethylene, propane, conductive or metal dusts, carbonaceous dusts, nonconductive dusts, and combustible/ignitable fibers or flyings.

Built for hot, hazardous areas such as steel mills and refineries, these lights work in temperatures up to 212° F. Rated NEC Classes I and II, they’re safe to use where there are ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust. Rated IP67 and NEMA 6, they’re sealed against humidity, washdowns, and even temporary submersion. They’ll also stay sealed in dusty conditions.

Mount these lights with the included bracket. It tilts to direct light where you need it.

These lights last at least a year when used at 212° F continuously. And at 131° F, they’ll last almost 7 years.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

For technical drawings and 3-D models, click on a part number.

Prevent contaminants from entering your ISO Class 3 clean room—these lights have an airtight seal. What makes them great for clean rooms also makes these lights ideal for food preparation and other spaces that require frequent washdowns. They’re rated NSF/ANSI 2 for direct contact with food. Rated IP65 and ETL listed for wet locations, they’re sealed against humidity and low-pressure washdowns. They have a cool light appearance that highlights white and blue tones to make your work more visible. A prismatic lens casts a wide beam and limits glare on your equipment.

To install, fasten with No. 14 tapping screws and seal with silicone (both not included).

For technical drawings and 3-D models, click on a part number.

To keep contaminants from entering your clean room, these lights seal against drop ceilings with an airtight gasket. They’re also covered in an antimicrobial paint and are fully enclosed. What makes them great for clean rooms also makes them great for washdowns and food preparation areas. They’re rated NSF/ANSI 2 for splash zones, so you can use them around splashing liquids from food. Rated IP65, they’re sealed against humidity and low-pressure washdowns. You can install these IC-rated lights in direct contact with insulation without risking a fire. Their lens disperses light evenly.

ISO class 3 lights have a prismatic lens that casts a beam that covers a wider area and limits glare better than lights with a smooth lens. If you don’t have a drop ceiling, no problem—these lights will also install into any finished ceiling opening with the built-in clamping arms.

Neutral lights are often used in workspaces. Cool lights highlight white and blue tones for higher visibility than neutral lights.

Mount these lights on a pole to illuminate pedestrian areas such as streets and walkways. No need for timers—a sensor automatically turns the light on at dusk and off at dawn. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other technologies. They produce a neutral white light. All include hardware for mounting to poles with 1 5/8" and 2 3/8" OD.

These lights are UL listed for Class I, Division 2, Groups A, B, C, and D for environments where ignitable concentrations of acetylene, hydrogen, ethylene, and propane occur infrequently, such as in the case of an accidental spill or failure of a ventilation system. They can be hardwired to operate on any of the voltages listed. They require a metal halide bulb (sold separately). These floodlights cannot be sold to California due to local energy efficiency regulations.

IIlluminate outdoor areas and objects such as parking lots, flag poles, and signs. These lights can be hardwired to operate on any of the voltages listed. All have built-in LEDs. They last longer, are more efficient, and generate less heat than other technologies. These lights produce a cool light appearance, which highlights white/blue tones and creates good visibility at night. Lights have an acrylic lens which is more impact resistant than standard glass lenses. They won’t turn yellow over time.

Use a bracket (sold separately) to mount lights to a wall or pole.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces. They turn on when they detect motion. These lights use a built-in LED bulb that lasts longer, is more efficient, and generates less heat than alternatives.

Styles B and C are protected from low-pressure jets of liquid such as water from a garden hose.

Heads adjust to any angle to direct light where needed. These lights automatically turn on when the sensor detects motion. Lights turn off when an area is unoccupied.

Lights with built-in LEDs last longer, are more efficient, and generate less heat than other technologies.

Style C are battery-operated—use where you don't have access to electricity. These lights emit a cool light appearance, which highlights white/blue tones creating good visibility at night. They detect motion up to 30 feet away.

Illuminate outdoor areas such as building grounds and entrance signs with a narrow beam of directed light. Heads adjust to direct light where needed.

Lights with a cool light appearance highlight white/blue tones creating good visibility at night.

Style A have built-in LEDs that last longer, are more efficient, and generate less heat than other technologies. These fixtures can be set to cool or neutral color appearances. They can be hardwired to operate on any of the voltages listed.

Lights with an aluminum housing resist corrosion better than those with a zinc housing.

Safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust, these lights are rated NEC Class I, II, and III. Their housing contains fire and sparks, so they won’t ignite what’s in your environment. They’re rated T4A, an NEC hazardous location temperature classification. This means their surface temperature stays below 248° F to prevent them from reacting with nearby flammable substances. These lights swing out from the wall, and their head tilts and swivels to illuminate loading docks and trailers. UL marine listed and NEMA 4X rated, they stand up to salt water and other corrosive liquids, and they’re sealed to withstand washdowns.

Their lens is tempered glass, so it resists scratches and impact during loading and unloading. Since the lens is clear, the lights give focused illumination that is useful for tasks and spot lighting. The LEDs emit a cool light that highlights white and blue tones and has a brighter appearance than neutral light.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

For technical drawings and 3-D models, click on a part number.