Brighten high-traffic areas with our most rugged ceiling lights. Rated IK10, the highest impact resistance rating, they’re protected by a 16-gauge cold-rolled steel frame and polycarbonate lens. A good choice for public spaces such as parking garages and stairwells, the lens is secured with tamper-resistant Torx screws to prevent vandalism. They have a center pin that makes them difficult to remove without special tools. The lens disperses light from the sides and bottom for ambient lighting.

Install these lights in covered areas indoors or outdoors—UL listed for wet locations, they’re sealed against humidity and dripping, splashing, and falling liquids.

Upgrade your old fixtures to energy-efficient LED lights. These kits replace the need to maintain hard-to-find-bulbs and ballasts, or replace the entire fixture. They fit inside fluorescent or incandescent fixtures and wire directly to power, so they’re quick to install. Choose a kit that matches your fixture’s shape and size. They come with everything you need to plug in and go. They either include driver circuitry on the circuit board or come with a driver. To install, remove all the old bulbs and the fixture’s wiring.

Select a light appearance to match your existing lighting. If you’re not sure what light appearance your existing fixtures have, choose a light with a selectable light appearance. Use the switch to adjust its appearance and brightness.

Strip kits include a driver and LED strips. Use them to retrofit recessed ceiling lights, washdown ceiling lights, and linear bay lights.

Brighten large, open areas, such as warehouses and manufacturing spaces. Use them to replace old high-intensity discharge (HID) lights—they’ll hang from the same chain. IP rated and UL listed for wet locations, these lights are sealed against washdowns. They’ll also keep out dust. The lens is made of polycarbonate to resist impact. These lights are also known as UFO lights.

Lights rated IP66 are protected against high-pressure washdowns. Lights that meet NSF/ANSI 2 splash zone are safe to use in food processing areas with splashing liquid.

Styles B, C, D, and E last longer when used at high temperatures than Style A, thanks to larger heat sinks and thermally protected drivers. Each light has exactly the same light appearance, so they’ll look the same if you’re using multiple. Styles B, C, and D can be threaded onto a conduit to create and rigid mount. Styles D and E are the best choice for food environments that require sanitizing washdowns. They’re domed so water drains off and debris doesn’t settle.

Add an emergency backup battery (sold separately) to keep your light running if the power goes out. They help your light meet UL 924, which ensures it will stay powered for at least 90 minutes during an outage.

IP or NEMA rated, these lights have a sealed lens to keep dust and moisture out for protection against washdowns. All meet ETL or UL standards for wet locations.

Mount these lights to the ceiling with the included brackets.

Styles A-B have a wraparound lens that allows light to shine from the sides as well as the bottom. Lights with a backup battery stay illuminated for at least 90 minutes during a power outage in compliance with UL 924. IP66 lights withstand high-pressure washdowns.

Also known as troffers, these lights fit flush into most drop-ceiling grids. They’re fully sealed with an airtight gasket, so they’re rated IP65 for protection against low-pressure washdowns, humidity, and dust. Install them anywhere that requires frequent cleaning, even an ISO Class 5 clean room. They also meet NSF/ANSI 2, so you can use them in food processing areas with splashing liquid. These lights won’t shatter and contaminate your area—they’re rated IK10, the highest rating for impact protection. And since they’re IC rated, you won’t risk a fire if you install them in direct contact with insulation.

Casting a neutral light dispersed by a frosted lens, these lights won’t cause glare on equipment. The lens is made of acrylic to resist scratching and yellowing.

Illuminate harsh, wet areas, even outside in extreme weather—these lights are often used on ship building ports. Rated NEMA 4X and UL marine listed, they’re sealed against heavy rain and washdowns, and they won’t corrode from salt water or cleaning chemicals. They’re also IP rated to stay sealed in dusty conditions. And with a durable glass lens, they’re rated IK08 for impact resistance. They’ll work in temperatures from -40° F to 145° F. Bright enough for environments that require high visibility, these lights have a cool appearance that highlights white and blue tones.

A quick-connect mount lets you wire these lights to an outlet box without having to hold them in place. First, wire the mount to your outlet box with a 3/4" conduit connector. Then twist the light into the mount to lock it in place.

These lights are DLC (DesignLight Consortium) listed, so they’ve been tested to confirm their energy efficiency. They’re also CE Marked to meet European safety standards.

Upgrade your existing bay lights to energy-efficient LEDs without replacing your mounting hood or conduit. These lights are NEMA 4X rated, so they’re sealed to withstand sprayed water and cleaning chemicals from washdowns. They’re also UL marine listed to resist corrosion from salt water. IP66 and IP67 rated, they’re dust tight. Even in extreme temperatures, from -40° F to 145° F, they keep shining.

Style A have mounting holes that align with Crouse-Hinds mounting hoods—no mounting adapter required. Styles B and C require an adapter (sold separately) to fit into Crouse-Hinds, Killark, and Mercmaster mounting hoods. Rated IK08 for impact resistance, they’re strong enough to take a hit without cracking.

Illuminate chemical plants, refineries, and other facilities where flammable and combustible gases may be present in the event of a leak or ventilation failure. These lights are rated for use in NEC Class 1, Division 2 hazardous locations. IP or NEMA rated, their seal also blocks out water and dust, so you can use them in damp, humid, and even washdown areas. Use the mounting holes to mount these lights to your ceiling.

For additional protection, choose a light rated for more NEC classes. NEC Class II-rated lights protect against flammable and combustible dust. NEC Class III-rated lights protect against flammable and combustible fibers.

UL marine listed lights resist the corrosive effects of salt water.

Mount these lights in recessed spaces so the lens is flush with the ceiling or wall. NEC Classes I and II, they’re safe to use in paint spray booths, blast booths, and other areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust.

LED lights have a cool light appearance that highlights white and blue tones for high visibility. They are lighter and easier to install than fluorescent lights, and you never have to change a light bulb. They’re UL rated for wet locations, so they’re sealed against humidity and dripping, splashing, and falling liquids.

Built for hot, hazardous areas such as steel mills and refineries, these lights work in temperatures up to 212° F. Rated NEC Classes I and II, they’re safe to use where there are ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust. Rated IP67 and NEMA 6, they’re sealed against humidity, washdowns, and even temporary submersion. They’ll also stay sealed in dusty conditions.

Mount these lights with the included bracket. It tilts to direct light where you need it.

These lights last at least a year when used at 212° F continuously. And at 131° F, they’ll last almost 7 years.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Upgrade your existing hazardous location bay lights to energy-efficient LEDs. Choose a light that matches the model already in place—they’ll fit into your existing hood and connect to the wires already in your conduit. Safe to use in areas with combustible concentrations of gases, vapors, dust, and fibers, these lights are rated NEC Class I, II, and III.

These lights even stand up in wet and outdoor locations. Rated IP66 and IP67, they withstand washdowns and submersion in water. They’re also dust tight. For resisting salt water and other corrosive liquids, they’re UL marine listed and NEMA 4X rated. They’ll keep shining in extreme temperatures, from -40° F to 145° F.

Style A have mounting holes that align perfectly with Crouse-Hinds mounting hoods—no mounting adapter required.

Style B and C require an adapter (sold separately) to fit into Crouse-Hinds, Killark, and Mercmaster mounting hoods. Style B are rated IK08 for impact resistance against accidental bumps.