Steel Fall-Arrest Anchors

Filter by

Attachment Method

Connection Hardware

Specifications Met

Weight Capacity

1,000 lb. to 9,999 lb.

10,000 lb. or greater

Material

Component

Length

Breaking Strength

RoHS

REACH

Construction

Mounting Hole Diameter

DFARS Specialty Metals

Exempt

Number of Mounting Holes

Anchor Point Attachment Method

Hook Over

Wraparound

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

Anchor End Connection Hardware

Cab-Mount Bracket

Carabiner

Carabiner with Swivel Eye

D-Ring

Snap Hook

Snap Hook with Swivel Eye

D-Ring Movement

Application

Harness Size

Weight

Snap Hook Opening Size

Number of Anchor End Connections

Finish

Performance

89 Products

Fall-Arrest Anchors

Connect fall-arrest lanyards to these anchor points. You'll want to install these into an approved, stable surface that is strong enough to support someone. When used together with a lanyard and a harness, they help you meet OSHA and ANSI safety standards.

Bolt On

	Mounting Holes
Material	Dia.	No. of	Fasteners Included	Connection Hardware	D-Ring Movement	Breaking Strength, lbf	Wt. Cap., lb.	Specs. Met		Each



	Steel	1/2"	2	No	D-Ring	Rigid	5,000	420	ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	11005T41	000000

Quick Install Push In

Quick-install push-in anchors mount overhead into vertical holes in steel without requiring any tools. Pull the collar back to retract the spring-loaded blade and slide the anchor into the hole. When you release, the blade rotates to lock the anchor in place. When you’re done, pull the collar back to remove the anchor.

Material	Connection Hardware	D-Ring Movement	Breaking Strength, lbf	Wt. Cap., lb.	Specs. Met		Each



3/4" to 1 1/4"	Steel	D-Ring	Rigid	5,000	310	ANSI/ASSP Z359.1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	11005T43	000000

Weld On

Weld-on anchors swivel 360°, so your lanyard turns smoothly with you as you move.

Connection Hardware	D-Ring Movement	Breaking Strength, lbf	Wt. Cap., lb.	Specs. Met		Each



Steel	D-Ring	Swivel	10,000	420	ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	11005T44	0000000

Concrete Fall-Arrest Anchors

Clip your fall-arrest lanyard to a secure connection point on approved concrete surfaces. These anchors expand into a hole, locking against the sides to form a secure hold. They swivel 360° as you move. When used together with a harness and lanyard, these anchors help you meet ANSI and OSHA safety standards.

Wedge In

Wedge-in anchors are more secure than push-in anchors. They expand in the hole as you turn the bolt.

Material	Connection Hardware	D-Ring Movement	Breaking Strength, lbf	Wt. Cap.	Specs. Met		Each



3/4"	Steel	D-Ring	Swivel	10,000	Not Rated	ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	11005T39	000000

Clamp-On Fall-Arrest Anchors

A secure hold that won’t damage your mounting surface—these anchors clamp onto stable structures such as half-walls to give you a place to clip your fall-arrest lanyard. Even though they clamp, they grip firmly with set screws and a locking pin. Made of powder-coated steel, they’re tough enough to stand up to frequent use, even outdoors. Protective pads on the clamp arm and set screws keep them from scratching your surface. When used with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.

Clamp On

Opening
Max.	Min.	Reach Lg.	Material	Color	Connection Hardware	Breaking Strength, lbf	Wt. Cap., lb.	Specs. Met		Each



	15"	0"	8"	Powder-Coated Steel	Black	D-Ring	5,000	310	ANSI/ASSP Z359.1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	9690N101	0000000

Strut Channel Fall-Arrest Anchors

Sliding in a track, these anchors give you freedom of movement while staying safely tethered. They fit into strut channels embedded in concrete for a secure place to clip your fall-arrest lanyard. They take just seconds to install and remove—the two sides of the anchor hook separately into your strut channel and lock together with a carabiner. When used together with a lanyard and harness, these anchors help you meet OSHA and ANSI safety standards.

Slide In

	Material	Connection Hardware	Carabiner Material	Breaking Strength, lbf	Wt. Cap.	Specs. Met		Each
With Carabiner



	1 5/8"	Zinc-Plated Steel	Carabiner	Steel	5,000	Not Rated	ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	9691N111	000000

Roof Fall-Arrest Anchors

Safely clip into these anchors for maintenance, inspection, or construction jobs on your roof. When used together with a lanyard and harness, they help you meet OSHA and ANSI safety standards. Attach them to wood and metal roofs, whether flat or sloped. Made of zinc-plated or powder-coated steel, they withstand moisture, rain, and other outdoor elements.

Nail On

Style A

		Max. No. of Simultaneous Users					Nail-On Mounting
	No. of Connections	For Fall Restraint	For Fall Arrest	Material	Fasteners Included	Connection Hardware	No. of Holes	Hole Dia.	Breaking Strength, lbf	Wt. Cap., lb.	Specs. Met		Each
Style A



		1	1	1	Zinc-Plated Steel	Yes	D-Ring	32	11/64"	5,000	310	ANSI/ASSP Z359.1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	11005T17	000000

Nail On, Bolt On

Style B

Style B—Style B anchors are more versatile than Style A anchors—you can even attach them to concrete. Clip your lanyard to any of the four sides for freedom of movement.

		Max. No. of Simultaneous Users						Nail-On Mounting		Bolt-On Mounting
	No. of Connections	For Fall Restraint	For Fall Arrest	Material	Color	Fasteners Included	Connection Hardware	No. of Holes	Hole Dia.	No. of Holes	Hole Dia.	Breaking Strength, lbf	Wt. Cap., lb.	Specs. Met		Each
Style B



		4	2	1	Powder-Coated Steel	Red	No	D-Ring	20	23/64"	4	1/2"	5,000	420	ANSI/ISEA 125, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	9876N111	0000000

Wrap-Around Fall-Arrest Anchors

Wire Rope

Wire Rope with Roller Cable and

Carabiner

Move these anchors between work sites—they loop around beams, rails, and other approved structures. They’re quick to install and don’t require any tools. Plus, they won’t damage your anchoring surface. When used together with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.

Wraparound


Wire Rope	Wire Rope with Roller Cable and Carabiner

Wire Rope—Wire rope anchors resist cuts and abrasion better than webbing anchors, so they last longer.

Roller Cable—Anchors with a roller cable are a good choice when you have to move back and forth while staying tethered. Use the included carabiner to attach the two loop ends together.

	Material	Connection Hardware	Breaking Strength, lbf	Wt. Cap., lb.	Specs. Met		Each
Wire Rope



	4	Steel	Ring × Ring	5,000	310	ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	9707N14	000000


	6	Steel	Ring × Ring	5,000	310	ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	9707N15	00000


	Wire Rope with Roller Cable and Carabiner



			6	Steel	Reinforced Loop × Reinforced Loop	5,000	310	ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	9707N17	000000

Twist-Locking-Latch Carabiners—Not for Lifting


Style 6	Style 7

Style 8	Style 9

Straight

Open

Latch

Position

Hold rope more securely than nonlocking and slide-locking-latch carabiners. While these carabiners are not as secure as screw-locking-latch carabiners, they are easier to open.

Lift Up/Twist 90°/Push In—Pull down/twist 90°/push in and lift up/twist 90°/push in carabiners are more secure than twist 90°/push in because they require an extra step to open.

Zinc-Plated Steel—Zinc-plated steel carabiners are mildly corrosion resistant.

Styles 7-9—Styles 3 and 7-13 have either a removable eye pin or eyelet that secures rope to one end of the carabiner to prevent it from sliding or moving.

ANSI/ASSP Z359.12—Carabiners that meet ANSI/ASSP Z359.12 have been tested for use in fall protection systems.

	Opening Wd.	Inside Lg.	Narrow End Inside Wd.	Open Latch Position	Locking Indicator	Color	Specs. Met	Certification		Each
Lift Up/Twist 90°/Push In







	Zinc-Plated Steel

	6	5,000	7/16"	13/16"	3 1/4"	1 1/4"	Straight	No	Gold	ANSI/ASSP Z359.12	—	8091T21	000000


	6	11,000	7/16"	7/8"	3 1/2"	1 1/4"	Straight	No	—	ANSI/ASSP Z359.12	CE Marked	3216T355	00000
	7	5,000	7/16"	1"	4"	3/8"	Straight	No	Gold	ANSI/ASSP Z359.12	—	3974N11	00000
	8	5,000	9/16"	2 1/4"	7 1/2"	1 13/16"	Straight	No	Gold	ANSI/ASSP Z359.12	—	8091T24	00000
	9	5,000	9/16"	1 3/16"	6 1/8"	7/8"	Straight	No	Gold	ANSI/ASSP Z359.12	—	8091T22	000000

Drop-Through Fall-Arrest Anchors

Anchor your fall-arrest lanyard to overhead grating, girders, and other stable structures. These anchors give you a secure, stable way to clip in without being permanent. Slip these anchors through a hole and the plate on the end catches firmly. When the job’s done, pull the anchor out and use it again. Polyurethane tubing near the plate protects the anchor from abrasion. When used together with a lanyard and harness, these anchors help you meet OSHA and ANSI safety standards.

Drop Through

		Plate			Cable
For Mounting Hole Dia.	Material	Dia.	Thk.	Material	Construction	Material	Connection Hardware	Breaking Strength, lbf	Wt. Cap.	Specs. Met	Choose a Cable Length, ft.		Each



	1 3/4" to 2"	Steel	4"	1/4"	Steel	Wire Rope	Steel	D-Ring	5,000	Not Rated	ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	2, 6, 8 1/2	9692N101	0000000


	1 3/4" to 3"	Steel	6"	1/4"	Steel	Wire Rope	Steel	D-Ring	5,000	Not Rated	ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	2, 6, 8 1/2	9692N111	000000
	1 3/4" to 6"	Steel	12"	1/4"	Steel	Wire Rope	Steel	D-Ring	5,000	Not Rated	ANSI/ASSP Z359.18, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	2, 6, 8 1/2	9692N121	000000

Quick-Stop Retracting Fall-Arrest Lanyards


1 Anchor End Connection, Webbing	1 Anchor End Connection, Wire Rope	2 Anchor End Connections, Webbing	2 Anchor End Connections, Wire Rope

Move freely, but limit how far you drop if you fall while working at height. These lanyards extend and retract as you move around to keep the slack out of your way. But with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. Used together with a harness and an anchor, they help you meet OSHA and ANSI safety standards.

Class 1—Use Class 1 lanyards when your anchor is at the same level as or above your D-ring.

Class 2—Class 2 lanyards are more versatile than Class 1 lanyards. Use them when your anchor is above, level with, or up to 5 ft. below your D-ring. They meet safety standards to prevent fraying or breaking if you fall near a sharp edge.

1 Anchor End Connection—Lanyards with 1 anchor end connection are best when you’re working in a single location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach to the new anchor point before disconnecting from the previous one.

Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.

Wire Rope—Wire rope lanyards hold up to abrasion better than webbing lanyards for a longer lifespan. They also resist corrosion.

Cab-Mount Bracket—Lanyards with a cab-mounting bracket have a curved top that slides along the rail of your vehicle, so you can move freely.

Impact-Indicating Stitching—Lanyards with impact indicator stitching have patches designed to tear during a fall or impact, so it’s easy to tell if a lanyard is still safe to use.

RFID Tag—Lanyards with an RFID tag can be scanned during inventory and inspections to make tracking easy.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Construction	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Housing Material	Wt. Cap., lb.	Specs. Met	Features		Each
Class 1







				1 Anchor End Connection

				6	Polyester Plastic	Webbing	Snap Hook	Steel	Carabiner with Swivel Eye	Steel	13/16"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8091T13	0000000


				6	Polyester Plastic	Webbing	Snap Hook	Aluminum	Carabiner with Swivel Eye	Steel	3/4"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching, Lightweight Hardware	9363N117	000000
				6	Polyester Plastic	Webbing	Snap Hook with Swivel Eye	Steel	Carabiner with Swivel Eye	Steel	13/16"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	9363N116	000000
				6	UHMW Polyethylene	Webbing	Snap Hook	Steel	Cab-Mount Bracket	Stainless Steel	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N111	000000
				11	UHMW Polyethylene	Webbing	Snap Hook	Steel	Cab-Mount Bracket	Stainless Steel	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	9363N112	000000
				11	UHMW Polyethylene	Webbing	Snap Hook	Steel	Carabiner with Swivel Eye	Steel	13/16"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	—	8091T45	000000
				20	UHMW Polyethylene	Webbing	Snap Hook	Steel	Carabiner	Steel	3/4"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8091T91	000000




						2 Anchor End Connections

						6	UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook	Steel	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	—	8091T25	000000


						Class 2







										1 Anchor End Connection

										6	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook	Steel	1"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N123	000000


										6	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook with Swivel Eye	Steel	1"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N124	000000
										8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	13/16"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	9363N115	000000
										8	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	13/16"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Hardware, UV Resistant	9363N119	000000
										8	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook with Swivel Eye	Steel	2"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Hardware, UV Resistant	9363N121	000000
										9	Polyester Plastic	Webbing	Snap Hook	Steel	Carabiner with Swivel Eye	Steel	13/16"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8091T44	000000
										20	Galvanized Steel	Wire Rope	Snap Hook with Swivel Eye	Steel	Carabiner with Swivel Eye	Steel	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	9363N113	000000
										50	Galvanized Steel	Wire Rope	Snap Hook with Swivel Eye	Steel	Carabiner with Swivel Eye	Steel	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	9363N114	000000




												2 Anchor End Connections

												6	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook	Steel	1"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N125	000000


												6	Kevlar/UHMW Polyethylene	Webbing	Pin Retainer	Steel	Snap Hook with Swivel Eye	Steel	1"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	RFID Tag	9363N126	000000
												8	Galvanized Steel	Wire Rope	Pin Retainer	Aluminum	Snap Hook	Steel	13/16"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Hardware	9363N122	000000

Tethering Travel-Limiting Lanyards

1 Anchor End Connection

2 Anchor End Connections

Keep a safe distance from fall hazards—these lanyards link you to an anchor point to limit your movement. They’re also known as travel restraint lanyards. Use them with a belt and fall-arrest anchor for a complete fall-prevention system. Not for use as fall-arrest equipment.

1 Anchor End Connection—Lanyards with 1 anchor end connection are best when you’re working in one location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchor points while staying safely tethered at all times. Attach to the new anchor point before disconnecting from the other anchor point.

					Snap Hook
	Lg., ft.	Material	Construction	Connection Hardware	Material	Opening Size	Wt. Cap., lb.	Specs. Met		Each
1 Anchor End Connection



		6	Polyester Plastic	Webbing	Snap Hook × Snap Hook	Steel	5/8"	310	ANSI/ASSP Z359.3, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	8227T34	000000


		6	Polyester Plastic	Webbing	Snap Hook × Snap Hook	Steel	1 7/8", 2 3/4"	425	ANSI/ASSP Z359.3, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.502	8227T111	00000
		6 to 10	Polyester Plastic	Webbing	Snap Hook × Snap Hook	Steel	5/8"	310	ANSI/ASSP Z359.3, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	8227T44	00000


		2 Anchor End Connections



				6	Polyester Plastic	Webbing	Snap Hook × Snap Hook × Snap Hook	Steel	1 7/8"	425	ANSI/ASSP Z359.3, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.502	8227T112	00000

Quick-Stop Retracting Fall-Arrest Lanyards with Anchor


Hook Over	Wraparound


Hook-Over Anchor Point 1 Anchor End Connection	Hook-Over Anchor Point, 2 Anchor End Connections	Wraparound Anchor Point, 1 Anchor End Connection	Wraparound Anchor Point, 2 Anchor End Connections

Clip these lanyards onto a rated structure—they form their own anchor. They extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. Used together with a harness, they help you meet OSHA and ANSI safety standards.

Class 1—Use Class 1 lanyards when the anchor is at the same level as or above your D-ring.

Class 2—Class 2 lanyards are more versatile than Class 1 lanyards. Use them when the anchor is above, level with, or up to 5 ft. below your D-ring. Since they're made with Kevlar webbing or wire rope, they meet safety standards to prevent fraying or breaking if you fall near a sharp edge.

Hook-Over Anchor Point—Hook-over lanyards have a large snap hook, known as a rebar hook, that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.

Wraparound Anchor Point—Wraparound lanyards loop around a rated structure such as an I-beam and then attach to themselves to create an anchor point.

1 Anchor End Connection—Lanyards with 1 anchor end connection are best when you’re working in a single location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach the new anchor point before disconnecting the previous one.

Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.

Wire Rope—Wire rope lanyards hold up to abrasion better than webbing lanyards for a longer lifespan.

Anchored Housing—Lanyards with an anchored housing are easier on your back than other retracting lanyards, since the weight of the housing hangs on the anchor rather than your harness’s D-ring.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Construction	Hardware	Material	Hardware	Material	Carabiner Opening Wd.	Snap Hook Opening Size	Housing Material	Wt. Cap., lb.	Specs. Met	Features		Each
Class 1—Hook Over







				1 Anchor End Connection

				6	UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Anchored Housing, Lightweight Aluminum Hardware	8091T111	0000000




						2 Anchor End Connections

						6	UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Anchored Housing, Lightweight Aluminum Hardware	8091T112	000000


						Class 1—Wraparound







										1 Anchor End Connection

										9	UHMW Polyethylene	Webbing	Carabiner with Swivel Eye	Steel	Snap Hook	Steel	2"	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	—	8091T884	000000


										Class 2—Hook Over







														1 Anchor End Connection

														8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	2 1/2"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	8091T211	000000


														8	Kevlar	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2 1/2"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Aluminum Hardware, UV Resistant	8091T883	000000




																2 Anchor End Connections

																8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	2 1/2"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	8091T212	000000


																8	Kevlar	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2 1/2"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Aluminum Hardware, UV Resistant	8091T313	000000


																Class 2—Wraparound







																		1 Anchor End Connection

																		8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	5/8"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	8091T213	000000


		8	Kevlar															Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	1"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Aluminum Hardware, UV Resistant	8091T311	000000




				2 Anchor End Connections

				8	Galvanized Steel													Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	5/8"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	8091T214	000000


				8	Kevlar													Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	1"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Aluminum Hardware, UV Resistant	8091T312	000000

Horizontal Fall-Arrest Anchor Spans


	Wire Rope

Also known as horizontal lifelines, these anchor spans provide fall protection on roofs and other areas where overhead anchors aren’t available. Attach to an anchor point on both sides. Once clipped in, you can move freely along the line while remaining tethered. When used together with a lanyard and harness, these anchor spans help you meet OSHA safety standards.

Wire Rope—Wire rope anchor spans are made of galvanized steel, so they resist corrosion and abrasion better than other anchor spans. This makes them tough enough to use outdoors for lines that stay up for multiple jobs.

Lg., ft.	Wt. Cap. per Person, lb.	Max. No. of Simultaneous Users	Material	Construction	Connection Hardware	Breaking Strength, lbf	Includes	Specs. Met		Each
60	400	2	Galvanized Steel	Wire Rope	Snap Hook × Snap Hook	5,000	Two Tie-Off Adapters	OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	1004N113	0000000

Vertical Fall-Arrest Anchor Spans for Ladders

Protect against falls while climbing ladders. These anchor spans have adjustable clamp brackets and secure permanently with an eyebolt on each end. You supply a harness and a carabiner as well as a wire rope grab (sold separately). In the event of a fall, the rope grab stops you within inches.

Anchor Spans											Wire Rope Grabs
Lg., ft.	For Max. Rung Dia.	Wt. Cap. per Person, lb.	Max. No. of Simultaneous Users	Material	Construction	Connection Hardware	Includes	Specs. Met		Each		Each
50	1 1/4"	310	4	Steel	Wire Rope	Eyebolt × Eyebolt	Mounting Hardware	ANSI-ASC A14.3	8272T61	0000000	8272T83	0000000
100	1 1/4"	310	4	Steel	Wire Rope	Eyebolt × Eyebolt	Mounting Hardware	ANSI-ASC A14.3	8272T62	000000	8272T83	000000

Shock-Absorbing Fall-Arrest Lanyards


1 Anchor End Connection Webbing	1 Anchor End Connection Wire Rope

2 Anchor End Connections Webbing	2 Anchor End Connections Webbing

If you fall when working at height, these lanyards extend to slow and stop your fall. However, you'll fall farther than you would with a quick-stop lanyard. When used together with a harness and anchor, these lanyards help you meet OSHA and ANSI safety standards.

1 Anchor End Connection—Lanyards with 1 anchor end connection are for working in a single location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach to the new anchor point before disconnecting from the previous one.

Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.

Wire Rope—Wire rope lanyards are durable and resist abrasion, so they won’t fray or snap if you fall over a sharp edge. They have a bright green plastic coating to make damage obvious during inspections.

Impact-Indicating Stitching—Lanyards with impact-indicating stitching have patches designed to tear during a fall or impact, so it’s easy to tell if a lanyard is still safe to use.

RFID Tag—Lanyards with an RFID tag can be scanned to log inspections, track usage, and schedule maintenance to keep your lanyard compliant with safety regulations.

					Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Coating Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met	Features		Each
1 Anchor End Connection







				Abrasion Resistant, Shock Absorbing Wire Rope

				6	10	Steel	Polyurethane Plastic	Snap Hook	Steel	Snap Hook	Steel	1 1/4"	420	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8168T214	000000




						Shock Absorbing Webbing

						3	7	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	1 3/8"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	—	8168T211	00000


						6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8168T772	00000
						4 to 6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	RFID Tag	8168T16	00000


						2 Anchor End Connections







										Abrasion Resistant, Shock Absorbing Wire Rope

										6	10	Steel	Polyurethane Plastic	Snap Hook	Steel	Snap Hook	Steel	1 1/4"	420	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8168T215	00000




												Shock Absorbing Webbing

												3	7	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	1 1/2"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	—	8168T212	00000


												6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	1 1/2"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	UV Resistant	8168T213	00000
												4 to 6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	RFID Tag	8168T51	00000

Shock-Absorbing Fall-Arrest Lanyards with Anchor


Hook Over	Wraparound


Hook Over with 1 Anchor End Connection	Hook Over with 2 Anchor End Connections

Wraparound with 1 Anchor End Connection	Wraparound with 2 Anchor End Connections

A lanyard and an anchor in one—these lanyards attach to rated structures to give you a secure place to clip in for fall protection. If you fall when working at height, these lanyards extend to slow and stop your fall. However, you'll fall farther than you would with a quick-stop lanyard. When used together with a harness and anchor, these lanyards help you meet OSHA and ANSI safety standards.

Hook-Over Anchor Point—Hook-over lanyards have a large snap hook, known as a rebar hook, that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.

Wraparound Anchor Point—Wraparound lanyards loop around a rated structure such as an I-beam and then attach to themselves to create an anchor point.

1 Anchor End Connection—Lanyards with 1 anchor end connection are for working in a single location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach to the new anchor point before disconnecting from the previous one.

Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.

Wire Rope—Wire rope lanyards are more abrasion resistant than webbing lanyards, so they withstand sharp edges without fraying or snapping. They have a bright green plastic coating to make damage obvious during inspections.

Impact-Indicating Stitching—Lanyards with impact-indicating stitching have patches designed to tear during a fall or impact, so it’s easy to tell if a lanyard is still safe to use.

RFID Tag—Lanyards with an RFID tag can be scanned to log inspections, track usage, and schedule maintenance to keep your lanyard compliant with safety regulations.

					Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Coating Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met	Features		Each
Hook Over with 1 Anchor End Connection







				Abrasion Resistant, Shock Absorbing Wire Rope

				6	10	Steel	Polyurethane Plastic	Snap Hook	Steel	Snap Hook	Steel	1 1/4", 2 1/2"	420	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8168T412	000000




						Shock Absorbing Webbing

						6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4", 2 1/2"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8168T773	00000


						6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	13/16", 2 1/2"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	UV Resistant	8168T771	00000


						Hook Over with 2 Anchor End Connections







										Abrasion Resistant, Shock Absorbing Wire Rope

										6	10	Steel	Polyurethane Plastic	Snap Hook	Steel	Snap Hook	Steel	1 1/4", 2 1/2"	420	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	8168T413	000000




												Shock Absorbing Webbing

												6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	1 1/2", 3"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	UV Resistant	8168T411	000000


												Wraparound with 1 Anchor End Connection







																Shock Absorbing Webbing

																6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	RFID Tag	8168T18	00000


																4 to 6	10	Nylon	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	RFID Tag	8168T54	000000


																Wraparound with 2 Anchor End Connections







																		Shock Absorbing Webbing

																		6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	RFID Tag	8168T65	000000

Electrical Arc-Flash-Resistant Quick-Stop Retracting Fall-Arrest Lanyards

Made with a durable Kevlar webbing, these lanyards meet ASTM F887, so they're tested to hold up against arc flash hazards. They extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. When used together with a harness and anchor, these lanyards help you meet OSHA and ANSI safety standards.

Class 1—Use Class 1 lanyards when your anchor is at the same level as or above your D-ring.

Class 2—Class 2 lanyards are more versatile than Class 1 lanyards—use them when your anchor is above your D-ring, at the same level, or up to 5 ft. below. They meet safety standards to prevent fraying or breaking if you fall near a sharp edge.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Construction	Hardware	Material	Hardware	Material	Carabiner Opening Wd.	Snap Hook Opening Size	Housing Material	Wt. Cap., lb.	Specs. Met		Each
Class 1







				1 Anchor End Connection

				6	Kevlar	Webbing	Snap Hook	Steel	Carabiner with Swivel Eye	Steel	1"	13/16"	Plastic	310	ANSI/ASSP Z359.14, ASTM F887, OSHA Compliant 29 CFR 1926.502	9536N11	0000000


				Class 2







								1 Anchor End Connection

								8	Kevlar	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	13/16"	Plastic	420	ANSI/ASSP Z359.14, ASTM F887, OSHA Compliant 29 CFR 1926.502	9536N12	000000

Fall-Arrest Harnesses with Lanyards


		Quick-Stop Lanyard	Shock-Absorbing Lanyard

Belt Thigh Buckle

Stay ready for occasional work at height—these harnesses come with a lanyard. Store them in the included bag when not in use. When they’re used properly with an anchor (not included with all), they help you meet OSHA and ANSI safety standards.

Attach the lanyard to the D-ring on the back, and these harnesses will keep you upright if you fall.

Impact-Indicating Stitching—Impact-indicating stitching is designed to tear during a fall or impact, so it’s easy to tell if a harness is still safe to use.

Quick Stop—Quick-stop lanyards, also known as SRLs, lock into place quickly to stop your fall in a shorter distance than shock-absorbing lanyards. The lanyard extends and retracts as you change position, giving you freedom to move while keeping the lanyard out of the way.

Shock Absorbing—Shock-absorbing lanyards are a good basic option. They have webbing that expands if you fall to reduce the impact on your body. They’re more lightweight than quick-stop lanyards.

		Lanyard										Anchor End Connection
	Performance	Lg., ft.	Lg. After Fall, ft.	Material	Construction	Harness Size	For Ht. Range	For Wt., lb.	Waist Size	Harness Material	D-Ring Location (No. of)	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met	Includes		Each
Front-Buckle Harnesses—Belt Thigh Buckle







				Impact-Indicating Stitching, Leg Support Handles

				Quick Stop	11	—	Polyester Fabric	Webbing	One Size	58" to 78"	110 to 320	32" to 50"	Polyester Plastic	Back (1)	Snap Hook	Steel	2"	310	ANSI/ASSP Z359.11, ANSI/ASSP Z359.14 Class 1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Lanyard, Storage Bag, Webbing Anchor Point	9291N12	0000000


				Shock Absorbing	6	10	Polyester Fabric	Webbing	One Size	58" to 78"	110 to 320	32" to 50"	Polyester Plastic	Back (1)	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.11, ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Lanyard, Storage Bag	9291N11	000000

Harsh-Environment Quick-Stop Retracting Fall-Arrest Lanyards

No matter how dirty and wet a job gets at height, these lanyards are built to last and work fast. Made of stainless steel, the wire rope and housing withstand corrosive and grimy conditions. The housing, rated IP69K, is fully sealed to keep out dust and high-pressure water.

These lanyards extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. They’re Class 1, so they work with D-rings that are at the same level or below your anchor. When used together with an anchor and a harness, these lanyards help you meet OSHA and ANSI safety standards.

An RFID tag makes these lanyards easy to track during inventory and inspections.

Class 1

			Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Housing Material	Enclosure Rating	Specs. Met	Features		Each
1 Anchor End Connection







				Abrasion Resistant Wire Rope

				15	Stainless Steel	Snap Hook with Swivel Eye	Steel	Carabiner	Stainless Steel	3/4"	420	Stainless Steel	IP69K	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip, RFID Tag	9353N111	000000000

Quick-Stop Retracting Fall-Arrest Lanyards with Alarms

Like an alarm on your car dashboard, these lanyards flash and beep until you're clipped into fall protection on an order picker or other vehicle. They come with a Bluetooth sensor that pairs with the lanyard carabiner. Together they detect when you're onboard and clipped into the anchor point. Compatible with most order pickers, the sensor mounts to the cab of your vehicle and hooks into its wiring for power.

These lanyards extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. These lanyards are Class 1, so they work with D-rings that are at the same level as or below your anchor. When used together with an anchor and a harness, these lanyards help you meet OSHA and ANSI safety standards.

An RFID tag makes these lanyards easy to track during inventory and inspections.

Class 1

			Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Hardware	Material	Hardware	Material	Carabiner Opening Wd.	Wt. Cap., lb.	Housing Material	Batteries Included	Specs. Met	Includes	Features		Each
1 Anchor End Connection







				Webbing

				6	UHMW Polyethylene	Carabiner with Swivel Eye	Aluminum	Carabiner with Swivel Eye	Steel	3/4", 13/16"	310	Plastic	Yes	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Bluetooth Sensor, Cable Ties, LED Light Strips, Sensor Power Cable with Wire Leads	Lightweight Hardware, RFID Tag	9366N101	000000000

D-Ring Fall-Arrest Extension Straps


	D-Ring × Snap Hook Wire Rope

Add length to your harness D-ring and make it easier to attach a fall-arrest lanyard.

Snap-Hook Connection—Snap hooks are easy to clip to your existing D-ring.

Wire Rope—Wire rope straps resist cuts and abrasion better than webbing straps, so they last longer.

	Specs. Met		Each
D-Ring × Snap Hook







	Wire Rope

	18"	Galvanized Steel	420	OSHA Compliant 29 CFR 1926.502, ANSI/ASSP Z359.11, ANSI/ASSP Z359.3	1003N113	000000

Electrical Arc-Flash-Resistant Shock-Absorbing Fall-Arrest Lanyards with Anchor

Made of Kevlar, these lanyards meet ASTM F887 when used with an arc-flash-resistant harness. Wrap the lanyard around a rated structure, such as an I-beam, and then attach it to itself to create an anchor point. Use them when working in a single location. When used together with a harness, they help you meet OSHA and ANSI safety standards.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met		Each
Wraparound with 1 Anchor End Connection







				Arc Flash Resistant, Shock Absorbing Webbing

				6	10	Kevlar	Snap Hook	Steel	Carabiner	Steel	7/8"	310	ANSI/ASSP Z359.13, ASTM F887, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.502	1785T13	0000000

Heat-Resistant Shock-Absorbing Fall-Arrest Lanyards with Anchor

Made of steel, these durable lanyards hold up in abrasive and high-heat applications. Attach the large snap hook directly to a rated structure, such as a scaffold or pipe, to create an anchor point. When used together with a harness, they help you meet OSHA and ANSI safety standards.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met		Each
Hook Over with 1 Anchor End Connection







				Heat Resistant, Shock Absorbing Wire Rope

				6	10	Steel	Snap Hook	Steel	Snap Hook	Steel	3/4", 2 1/2"	310	ANSI/ASSP Z359.13, ANSI/ASSP Z359.3, ASTM F887	8263T9	0000000

Retrieval Travel-Limiting Lanyards

Stay straight up and down while being raised and lowered through narrow spaces. These lanyards clip into your harness’s shoulder D-rings to keep you from pitching forward. Grab onto the bar so your arms won't get caught on anything as you pass through manholes and other openings.

Not for use as fall-arrest equipment alone. Add them to a complete fall-arrest system, which includes a lanyard, harness, and anchor.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Construction	Hardware	Material	Hardware	Material	Opening Size	Wt. Cap., lb.	Specs. Met		Each
2 Harness End Connections



		2 1/2	Polyester Plastic	Webbing	Snap Hook	Steel	D-Ring	Steel	7/8"	420	ANSI/ASSP Z117.1, ANSI/ASSP Z359.4, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	9532N121	000000

Electrical Arc-Flash-Resistant Shock-Absorbing Fall-Arrest Lanyards

Image of ProductInUse. Back orientation. Contains Annotated. Fall-Arrest Lanyards. Electrical Arc-Flash-Resistant Shock-Absorbing Fall-Arrest Lanyards.

1 Anchor End Connection

Image of Product. Front orientation. Fall-Arrest Lanyards. Electrical Arc-Flash-Resistant Shock-Absorbing Fall-Arrest Lanyards, 2 Anchor End Connections.

2 Anchor End Connections

Made of Kevlar, these lanyards meet ASTM F887 when used with an arc-flash-resistant harness. When used together with an anchor and harness, these lanyards help you meet OSHA and ANSI safety standards.

1 Anchor End Connection—Lanyards with 1 anchor end connection are for working in one location.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met		Each
1 Anchor End Connection







				Arc Flash Resistant, Shock Absorbing Webbing

				6	10	Kevlar	Snap Hook	Steel	Snap Hook	Steel	13/16"	310	ANSI/ASSP Z359.13, ASTM F887, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.502	1785T12	0000000


				2 Anchor End Connections







								Arc Flash Resistant, Shock Absorbing Webbing

								6	10	Kevlar	Snap Hook	Steel	Snap Hook	Steel	13/16"	310	ANSI/ASSP Z359.13, ASTM F887, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	1785T14	000000

Heat-Resistant Shock-Absorbing Fall-Arrest Lanyards

1 Anchor End Connection

2 Anchor End Connections

Made of steel, these durable lanyards hold up in abrasive and high-heat applications. Use them in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, these lanyards help you meet OSHA and ANSI safety standards.

1 Anchor End Connection—Lanyards with 1 anchor end connection are best when you’re working in one location.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met		Each
1 Anchor End Connection







				Heat Resistant, Shock Absorbing Wire Rope

				6	10	Steel	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, ANSI/ASSP Z359.3, ASTM F887	8263T6	0000000


				2 Anchor End Connections







								Heat Resistant, Shock Absorbing Wire Rope

								6	10	Steel	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, ANSI/ASSP Z359.3, ASTM F887	8263T7	000000

Positioning Travel-Limiting Lanyards


Lanyard	Lanyard with Position Lock	Lanyard	Lanyard with Positioning Lock

Tether yourself close to your work so your hands are free to use tools and equipment. These lanyards clip to your harness’s hip D-rings, allowing you to keep a stable working stance on the sides of vertical structures.

Not for use as fall-arrest equipment alone. Add them to a complete fall-arrest system, which includes a fall-arrest lanyard, harness, and anchor.

Travel-Limiting Lanyards with Position Lock—Lanyards with a position lock let you adjust how far or close you are to your work and then lock it in place. A cover protects the lanyard from wear to extend its life.

					Snap Hook		Carabiner
	Lg.	Material	Construction	Connection Hardware	Material	Opening Size	Material	Opening Wd.	Wt. Cap., lb.	Specs. Met		Each
Travel-Limiting Lanyards



		22"	Polyester Plastic	Webbing	Snap Hook × Snap Hook × Snap Hook	Steel	1 1/4", 2 3/4", 1 1/4"	—	—	310	ANSI/ASSP Z359.3, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.502	9884N112	000000


		Travel-Limiting Lanyards with Position Lock



				2 ft. to 6 1/2 ft.	Nylon	Rope	Snap Hook × Carabiner	Steel	1 1/4"	Steel	2 1/4"	425	ANSI/ASSP Z359.3, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.502	9884N111	000000