Fall-Arrest Anchors
Connect fall-arrest lanyards to these anchor points. You'll want to install these into an approved, stable surface that is strong enough to support someone. When used together with a lanyard and a harness, they help you meet OSHA and ANSI safety standards.
Quick-install push-in anchors mount overhead into vertical holes in steel without requiring any tools. Pull the collar back to retract the spring-loaded blade and slide the anchor into the hole. When you release, the blade rotates to lock the anchor in place. When you’re done, pull the collar back to remove the anchor.
| Material | For Mounting Hole Dia. | Connection Type | D-Ring Type | Breaking Strength, lbs. | Capacity, lbs. | Specifications Met | Each | |
| Steel | 3/4"-1 1/4" | D-Ring | Rigid | 5,000 | 310 | ANSI Z359.1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | 00000000 | 000000 |
Clamp-On Fall-Arrest Anchors
A secure hold that won’t damage your mounting surface—these anchors clamp onto stable structures such as half-walls to give you a place to clip your fall-arrest lanyard. Even though they clamp, they grip firmly with set screws and a locking pin. Made of powder-coated steel, they’re tough enough to stand up to frequent use, even outdoors. Protective pads on the clamp arm and set screws keep them from scratching your surface. When used with a harness and lanyard, these anchors help you meet OSHA and ANSI safety standards.
Opening | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Material | Color | Connection Type | Breaking Strength, lbs. | Specifications Met | Each | |
| 15" | 0" | 8" | Powder-Coated Steel | Black | D-Ring | 5,000 | ANSI Z359.1, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | 00000000 | 0000000 |
Vertical Fall-Arrest Anchor Spans
Also known as vertical lifelines, these anchor spans protect you from falls when climbing vertical structures such as ladders and scaffolding. Durable enough for outdoor use, the polyester rope withstands abrasion, rot, and mildew. It can also handle temperatures up to 300° F.
To use these anchor spans, you’ll need a harness and a lanyard with a rope grab (sold separately). Attach the snap hook at one end of the rope to an overhead anchor point. If you fall, the rope grab stops you within inches. These anchor spans help you meet OSHA and ANSI safety standards.
Anchor Span Ropes | Lanyards with Rope Grab | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Max. No. of Simultaneous Users | Material | Construction | Connection Type | Capacity, lbs. | Breaking Strength, lbs. | Specifications Met | Each | Each | ||
| 25 | 1 | Polyester | Rope | Snap Hook | 310 | 5,000 | OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502, ANSI A10.32, ANSI Z359.1 | 00000000 | 000000 | 0000000 | 0000000 |
| 50 | 1 | Polyester | Rope | Snap Hook | 310 | 5,000 | OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502, ANSI A10.32, ANSI Z359.1 | 000000 | 000000 | 0000000 | 000000 |
| 100 | 1 | Polyester | Rope | Snap Hook | 310 | 5,000 | OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502, ANSI A10.32, ANSI Z359.1 | 000000 | 000000 | 0000000 | 000000 |
Shock-Absorbing Fall-Arrest Lanyards
For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Polyester/elastomer lanyards expand and contract with your movements.
Dual-leg lanyards attach to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Single Leg | ||||||||||||
| 6 | 9 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
| 4 to 6 ft. | 10 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 00000 |
Dual Leg | ||||||||||||
| 6 | 9 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
| 6 | 10 | 310 | Polyester/Elastomer | Webbing | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
| 4 to 6 ft. | 10 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 00000 |
Shock-Absorbing Fall-Arrest Lanyards with Anchor Point
For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Wraparound lanyards loop around a rated structure such as an I-beam and then attach to themselves to create an anchor point.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Wraparound Single Leg | ||||||||||||
| 4 to 6 | 10 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 0000000 |
Electrical Arc Flash-Resistant Fall-Arrest Harnesses
These harnesses have leather-insulated metal components and meet ASTM F887 when used with an arc flash-resistant lanyard. They have a D-ring on the back that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | Waist Size | Specifications Met | Each | |
Front-Buckle Harness with Slide Thigh Buckle | |||||||
|---|---|---|---|---|---|---|---|
| 400 | Kevlar | Back (1) | XL | 32" to 56" | ANSI Z359.1, ASTM F887 | 000000 | 0000000 |
Fall-Arrest Harnesses for Positioning
D-rings on each hip provide a stable working position. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Harness Size (Waist) | For Height | For Weight, lbs. | Specifications Met | Each | |
Zip-Up Harness with Slide Thigh Buckle | ||||||||
|---|---|---|---|---|---|---|---|---|
| 310 | Polyester | Back (1), Hips (2) | M (34" to 37") | 5’-6’3” | 140-250 | ANSI Z359.1 | 0000000 | 0000000 |
| 310 | Polyester | Back (1), Hips (2) | L (38" to 41") | 5’-6’3” | 140-250 | ANSI Z359.1 | 0000000 | 000000 |
| 310 | Polyester | Back (1), Hips (2) | XL (42" to 49") | 5’2”-6’6” | 180-310 | ANSI Z359.1 | 0000000 | 000000 |
Fall-Arrest Harnesses for Ladder Climbing and Positioning
These versatile harnesses have one D-ring on the chest for use with ladder-climbing systems as well as one D-ring on each hip to provide a stable working position. Attach harness to a ladder-climbing system using a carabiner. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | For Height | For Weight, lbs. | Waist Size | Specifications Met | Each | |
Pullover Harness with Traditional Thigh Buckle | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 400 | Polyester | Back (1), Chest (1), Hips (2) | One Size Fits All | __ | __ | 32" to 48" | ANSI Z359.1 | 0000000 | 0000000 |
Front-Buckle Harness with Traditional Thigh Buckle | |||||||||
| 400 | Polyester | Back (1), Chest (1), Hips (2) | M/L | 5'4"-6'5" | 150-225 | 32" to 48" | ANSI Z359.1 | 00000000 | 000000 |