Quick-Stop Fall-Arrest Lanyards with Anchor Point
These lanyards form their own anchor point by attaching directly to a rated structure. A quick-stop lanyard will stop your fall within a few inches. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Hook-over lanyard has a large snap hook that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.
Wraparound lanyard loops around a rated structure such as an I-beam and then attaches to itself to create an anchor point.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Housing Material | Specifications Met | Each | |
Hook Over Single Leg | ||||||||||||
| 6 | 310 | Polyester | Webbing | Carabiner | Steel | Snap Hook | Steel | 2 1/2" | Plastic | ANSI Z359.14 | 0000000 | 0000000 |
Wraparound Single Leg | ||||||||||||
| 9 | 310 | UHMW Polyethylene | Webbing | Carabiner | Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 00000000 | 000000 |
Quick-Stop Fall-Arrest Lanyards
A quick-stop lanyard will stop your fall within a few inches. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Dual-leg lanyard attaches to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Housing Material | Specifications Met | Each | |
Single Leg | ||||||||||||
| 6 | 310 | Polyester | Webbing | Snap Hook | Steel | Carabiner | Steel | __ | Plastic | ANSI Z359.14 | 0000000 | 0000000 |
| 9 | 310 | Polyester | Webbing | Carabiner | Steel | Snap Hook | Steel | 1" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
| 11 | 310 | Polyester | Webbing | Shackle | Steel | Carabiner | Steel | __ | Plastic | ANSI Z359.14 | 0000000 | 000000 |
| 20 | 420 | Nylon | Webbing | Swivel Eye | Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
| 25 | 310 | Stainless Steel | Wire Rope | Carabiner | Stainless Steel | Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
| 50 | 420 | Stainless Steel | Wire Rope | Swivel Eye | Stainless Steel | Snap Hook | Stainless Steel | 3/4" | Aluminum, Stainless Steel | ANSI Z359.14 | 0000000 | 00000000 |
Dual Leg | ||||||||||||
| 6 | 310 | UHMW Polyethylene | Webbing | Pin Retainer | Steel | Snap Hook/Snap Hook | Steel | 3/4" | Plastic | ANSI Z359.14 | 0000000 | 000000 |
Heat-Resistant Shock-Absorbing Fall-Arrest Lanyards with Anchor Point
Made of steel, these durable lanyards hold up in abrasive and high-heat applications. Attach the large snap hook directly to a rated structure such as a scaffold or pipe to create an anchor point. For adequate fall clearance, you must have at least 20 ft. of clearance. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Hook-Over Single Leg | ||||||||||||
| 6 | 10 | 310 | Steel | Wire Rope | Snap Hook | Steel | Snap Hook | Steel | 3/4", 2 1/2" | ANSI Z359.13 | 000000 | 0000000 |
Electrical Arc Flash-Resistant Shock-Absorbing
Fall-Arrest Lanyards with Anchor Point
Made of Kevlar, these lanyards meet ASTM F887 when used with an arc flash-resistant harness. Wrap the lanyard around a rated structure such as an I-beam and then attach it to itself to create an anchor point. For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness for a complete fall-arrest system.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Wraparound Single Leg | ||||||||||||
| 6 | 10 | 310 | Kevlar | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1, ASTM F887 | 000000 | 0000000 |
Shock-Absorbing Fall-Arrest Lanyards with Anchor Point
For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Hook-over lanyards have a large snap hook that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.
Wraparound lanyards loop around a rated structure such as an I-beam and then attach to themselves to create an anchor point.
Harness End Connection | Anchor End Connection | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Carabiner Opening Width | Specifications Met | Each | |
Hook Over Single Leg | |||||||||||||
| 6 | 9 1/2 | 310 | Polyester | Webbing | Snap Hook | Steel | Snap Hook | Steel | 2 1/2" | __ | ANSI Z359.13 | 00000000 | 0000000 |
| 6 | 10 | 310 | Polyester | Webbing | Snap Hook | Steel | Snap Hook | Steel | 2 1/2" | __ | ANSI Z359.13 | 00000000 | 000000 |
Wraparound Single Leg | |||||||||||||
| 6 | 9 1/2 | 310 | Polyester | Webbing | Snap Hook | Steel | Carabiner | Steel | __ | 13/16" | ANSI Z359.13 | 00000000 | 000000 |
Heat-Resistant Shock-Absorbing Fall-Arrest Lanyards
Made of steel, these durable lanyards hold up in abrasive and high-heat applications. For adequate fall clearance, you must have at least 20 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Dual-leg lanyard attaches to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Single Leg | ||||||||||||
| 6 | 10 | 310 | Steel | Wire Rope | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.13 | 000000 | 0000000 |
Dual Leg | ||||||||||||
| 6 | 10 | 310 | Steel | Wire Rope | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | ANSI Z359.13 | 000000 | 000000 |
Shock-Absorbing Fall-Arrest Lanyards
|  Single Leg |  Dual Leg |
|
For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Polyester/elastomer lanyards expand and contract with your movements.
Dual-leg lanyards attach to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Single Leg | ||||||||||||
| 6 | 9 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
| 6 | 9 1/2 | 420 | Polyester | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | __ | 000000 | 000000 |
| 6 | 10 | 310 | Polyester/Elastomer | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
| 4 to 6 ft. | 10 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 00000 |
Dual Leg | ||||||||||||
| 6 | 9 1/2 | 310 | Nylon | Webbing | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | ANSI Z359.1 | 0000000 | 000000 |
Electrical Arc Flash-Resistant Shock-Absorbing Fall-Arrest Lanyards
| Single Leg | Dual Leg |
|
Made of Kevlar, these lanyards meet ASTM F887 when used with an arc flash-resistant harness. For adequate fall clearance, you must have at least 18 1/2 ft. of clearance. Use in conjunction with a harness and an anchor for a complete fall-arrest system. When used properly, the system meets applicable OSHA requirements.
Dual-leg lanyard attaches to two anchors at once.
Harness End Connection | Anchor End Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg., ft. | Lg. After Fall, ft. | Capacity, lbs. | Material | Construction | Type | Material | Type | Material | Snap Hook Opening Size | Specifications Met | Each | |
Single Leg | ||||||||||||
| 6 | 10 | 310 | Kevlar | Webbing | Snap Hook | Steel | Snap Hook | Steel | 3/4" | ANSI Z359.1, ASTM F887 | 000000 | 0000000 |
Dual Leg | ||||||||||||
| 6 | 10 | 310 | Kevlar | Webbing | Snap Hook | Steel | Snap Hook/Snap Hook | Steel | 3/4" | ANSI Z359.1, ASTM F887 | 000000 | 000000 |
Fall-Arrest Harnesses for Ladder Climbing and Positioning
These versatile harnesses have one D-ring on the chest for use with ladder-climbing systems as well as one D-ring on each hip to provide a stable working position. Attach harness to a ladder-climbing system using a carabiner. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | For Height | For Weight, lbs. | Waist Size | Specifications Met | Each | |
Pullover Harness with Traditional Thigh Buckle | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 400 | Polyester | Back (1), Chest (1), Hips (2) | One Size Fits All | __ | __ | 32" to 48" | ANSI Z359.1 | 0000000 | 0000000 |
Front-Buckle Harness with Traditional Thigh Buckle | |||||||||
| 400 | Polyester | Back (1), Chest (1), Hips (2) | M/L | 5'4"-6'5" | 150-225 | 32" to 48" | ANSI Z359.1 | 00000000 | 000000 |
Heat-Resistant Fall-Arrest Harnesses
Made of heat-resistant Nomex, these harnesses withstand temperatures up to 700° F. They have a D-ring on the back that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Harness Material | D-Ring Location (No. of) | Size | For Height | For Weight, lbs. | Max. Temperature, ° F | Specifications Met | Each | |
Front-Buckle Harness with Slide Thigh Buckle | ||||||||
|---|---|---|---|---|---|---|---|---|
| Nomex | Back (1) | S | 4’10”-5’10” | 100-160 | 700° | ANSI Z359.11 | 00000000 | 0000000 |
| Nomex | Back (1) | M/L | 5’-6’2” | 180-260 | 700° | ANSI Z359.11 | 00000000 | 000000 |
| Nomex | Back (1) | XL | 5’2”-6’2” | 280-320 | 700° | ANSI Z359.11 | 00000000 | 000000 |
Fall-Arrest Harnesses
Harnesses have a D-ring that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
Padded harnesses have breathable padding on the back for all-day comfort.
Available Sizes | |||
|---|---|---|---|
| Size | For Height | For Weight | Waist Size |
Pullover Harness with Traditional Thigh Buckle—Polyester | |||
| M/L | 5'0"-6'4" | 140-280 lbs. | 32" to 48" |
| XL | 5'4"-6'6" | 200-330 lbs. | 36" to 54" |
| 2XL | 5'6"-6'8" | 230-380 lbs. | 42" to 57" |
| 3XL | 5'8"-6'8" | 250-400 lbs. | 46" to 60" |
Pullover Harness with Slide Thigh Buckle—Polyester | |||
| S | 4'10"-6'0" | 100-160 lbs. | 26" to 38" |
| M/L | 5'0"-6'4" | 140-280 lbs. | 32" to 48" |
| XL | 5'4"-6'6" | 200-330 lbs. | 36" to 54" |
| 2XL | 5'6"-6'8" | 230-380 lbs. | 42" to 57" |
| 3XL | 5'8"-6'8" | 250-400 lbs. | 46" to 60" |
Pullover Harness with Squeeze Release Thigh Buckle—Polyester | |||
| S | 4'10"-6'0" | 100-160 lbs. | 26" to 38" |
| M | 5'0"-6'2" | 140-240 lbs. | 30" to 42" |
| M/L | 5'0"-6'4" | 140-280 lbs. | 32" to 48" |
| L | 5'2"-6'4" | 170-300 lbs. | 34" to 50" |
| XL | 5'4"-6'6" | 200-330 lbs. | 36" to 54" |
| 2XL | 5'6"-6'8" | 230-380 lbs. | 42" to 57" |
Front-Buckle Harness with Traditional Thigh Buckle—Polyester | |||
| XXS/XS | 5’-6’2” | 0-150 lbs. | 24" to 32" |
| M/L | 5'4"-6'5" | 150-225 lbs. | 32" to 48" |
| XL | 5'4"-6'6" | 225-300 lbs. | 36" to 52" |
| 2XL | 5'4"-6'6" | 300-400 lbs. | 45" to 57" |
| XL/2XL | 5'2"-6'8" | 200-360 lbs. | 40" to 55" |
Front-Buckle Harness with Slide Thigh Buckle—Polyester | |||
| XXS/XS | 5’-6’2” | 0-150 lbs. | 24" to 32" |
| M/L | 5'4"-6'5" | 150-225 lbs. | 32" to 48" |
| XL | 5'4"-6'6" | 225-300 lbs. | 36" to 52" |
| 2XL | 5'4"-6'6" | 300-400 lbs. | 45" to 57" |
| XL/2XL | 5'2"-6'8" | 200-360 lbs. | 40" to 55" |
Front-Buckle Harness with Squeeze Release Thigh Buckle— Polyester | |||
| M/L | 5'0"-6'2" | 160-250 lbs. | 32" to 48" |
| XL/2XL | 5'2"-6'8" | 250-360 lbs. | 40" to 55" |
| 3XL | 5'6"-6'8" | 360-420 lbs. | 46" to 60" |
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Specifications Met | Features | Choose a Size | Each | |
Pullover Harness with Traditional Thigh Buckle | |||||||
|---|---|---|---|---|---|---|---|
| 400 | Polyester | Back (1); Chest (1) | ANSI/ASSP Z359.11 | __ | 00000000 | 0000000 | |
Pullover Harness with Slide Thigh Buckle | |||||||
| 400 | Polyester | Back (1); Chest (1) | ANSI/ASSP Z359.11 | __ | 00000000 | 000000 | |
Pullover Harness with Squeeze Release Thigh Buckle | |||||||
| 400 | Polyester | Back (1); Chest (1) | ANSI/ASSP Z359.11 | __ | 00000000 | 000000 | |
Front-Buckle Harness with Traditional Thigh Buckle | |||||||
| 400 | Polyester | Back (1) | ANSI/ASSP Z359.11 | __ | 0000000 | 00000 | |
| 420 | Polyester | Back (1) | ANSI/ASSE A10.32, ANSI/ASSP Z359.11 | __ | XL/2XL | 00000000 | 00000 |
Front-Buckle Harness with Slide Thigh Buckle | |||||||
| 400 | Polyester | Back (1) | ANSI/ASSP Z359.11 | __ | 0000000 | 00000 | |
| 420 | Polyester | Back (1) | ANSI/ASSE A10.32, ANSI/ASSP Z359.11 | __ | XL/2XL | 00000000 | 00000 |
Front-Buckle Harness with Squeeze Release Thigh Buckle | |||||||
| 420 | Polyester | Back (1) | ANSI/ASSP Z359.11 | Padded Back | 0000000 | 000000 | |
Electrical Arc Flash-Resistant Fall-Arrest Harnesses
These harnesses have leather-insulated metal components and meet ASTM F887 when used with an arc flash-resistant lanyard. They have a D-ring on the back that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | Waist Size | Specifications Met | Each | |
Front-Buckle Harness with Slide Thigh Buckle | |||||||
|---|---|---|---|---|---|---|---|
| 400 | Kevlar | Back (1) | XL | 32" to 56" | ANSI Z359.1, ASTM F887 | 000000 | 0000000 |
Fall-Arrest Harnesses for Extracting
With D-rings on the shoulders, these harnesses allow you to raise and lower workers. They have a D-ring on the back that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | For Height | For Weight, lbs. | Waist Size | Specifications Met | Each | |
Front-Buckle Harness with Slide Thigh Buckle | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 310 | Polyester | Back (1), Shoulders (2) | M/L | 5'4"-6'5" | 150-225 | 32" to 48" | ANSI Z359.11 | 0000000 | 0000000 |
Fall-Arrest Harnesses for Positioning
D-rings on each hip provide a stable working position. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Harness Size (Waist) | For Height | For Weight, lbs. | Specifications Met | Each | |
Front-Buckle Harness with Slide Thigh Buckle | ||||||||
|---|---|---|---|---|---|---|---|---|
| 425 | Polyester | Back (1), Hips (2) | XL (36" to 52") | 5’2”-6’6” | 210-320 | ANSI/ASSP Z359.11 | 0000000 | 000000 |
Zip-Up Harness with Slide Thigh Buckle | ||||||||
| 310 | Polyester | Back (1), Hips (2) | M (34" to 37") | 5’-6’3” | 140-250 | ANSI Z359.1 | 0000000 | 000000 |
| 310 | Polyester | Back (1), Hips (2) | L (38" to 41") | 5’-6’3” | 140-250 | ANSI Z359.1 | 0000000 | 000000 |
| 310 | Polyester | Back (1), Hips (2) | XL (42" to 49") | 5’2”-6’6” | 180-310 | ANSI Z359.1 | 0000000 | 000000 |
Twist-Locking Carabiners—Not for Lifting
Latch
Position
Latch
Position
Hold rope more securely than nonlocking and slide-release carabiners. While these carabiners are not as secure as screw-locking carabiners, they are easier to open.
Pull down/twist 90°/push in and lift up/twist 90°/push in carabiners are more secure than twist 90°/push in because they require an extra step to open.
Zinc-plated steel carabiners are mildly corrosion resistant. Aluminum carabiners are more lightweight and resist corrosion better than zinc-plated steel. Anodized carabiners offer excellent corrosion resistance. Stainless steel carabiners have excellent resistance to salt water and chemicals.
Styles 3 and 7-13 have either a removable eye pin or eyelet that secures rope to one end of the carabiner to prevent it from sliding or moving.
Carabiners with an offset latch open to the side, giving you more space to attach large items.
Carabiners with a locking indicator have a symbol that is shown when the carabiner is fully locked.
Carabiners that meet ANSI/ASSP Z359.12 have been tested for use in fall protection systems.
For technical drawings and 3-D models, click on a part number.
| Style | Capacity, lbs. | Thick. | Opening Wd. | Inside Lg. | Narrow-End Inside Wd. | Open Latch Position | Locking Indicator | Color | Specifications Met | Each | |
Pull Down/Twist 90°/Push In | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
17-4 PH Stainless Steel | |||||||||||
| 3 | 8,900 | 7/16" | 15/16" | 3 1/2" | 1" | Offset | Yes | __ | ANSI/ASSP Z359.12, CE Marked | 0000000 | 000000 |
| 4 | 8,900 | 7/16" | 15/16" | 3 1/2" | 1 1/4" | Offset | Yes | __ | ANSI/ASSP Z359.12, CE Marked | 0000000 | 00000 |
| 5 | 11,200 | 7/16" | 1 3/16" | 4 1/16" | 1 3/4" | Offset | Yes | __ | ANSI/ASSP Z359.12, CE Marked | 0000000 | 00000 |
Lift Up/Twist 90°/Push In | |||||||||||
Zinc-Plated Steel | |||||||||||
| 6 | 5,000 | 7/16" | 13/16" | 3 1/4" | 1 1/4" | Straight | No | Gold | ANSI/ASSP Z359.12 | 0000000 | 00000 |
| 7 | 5,000 | 7/16" | 1" | 4" | 3/8" | Straight | No | Gold | ANSI/ASSP Z359.12 | 0000000 | 00000 |
| 8 | 5,000 | 9/16" | 2 1/4" | 7 1/2" | 1 13/16" | Straight | No | Gold | ANSI/ASSP Z359.12 | 0000000 | 00000 |
| 9 | 5,000 | 9/16" | 1 3/16" | 6 1/8" | 1" | Straight | No | Gold | ANSI/ASSP Z359.12 | 0000000 | 000000 |
Anodized Aluminum | |||||||||||
| 12 | 5,000 | 1/2" | 7/8" | 3 3/4" | 1" | Straight | No | __ | ANSI/ASSP Z359.12 | 0000000 | 00000 |
| 12 | 5,000 | 11/16" | 2" | 8" | 7/8" | Straight | No | __ | ANSI/ASSP Z359.12 | 0000000 | 00000 |
| 17 | 5,000 | 1/2" | 13/16" | 3 1/2" | 7/8" | Straight | No | __ | ANSI/ASSP Z359.12 | 0000000 | 00000 |
420 Stainless Steel | |||||||||||
| 6 | 5,000 | 7/16" | 7/8" | 3 7/16" | 1 1/8" | Straight | No | __ | ANSI/ASSP Z359.12 | 0000000 | 00000 |