Fall-Arrest Harnesses
Harnesses have a D-ring that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
Padded harnesses have breathable padding on the back for all-day comfort.
Available Sizes | |||
|---|---|---|---|
| Size | For Height | For Weight | Waist Size |
Front-Buckle Harness with Traditional Thigh Buckle—Polyester | |||
| XXS/XS | 5’-6’2” | 0-150 lbs. | 24" to 32" |
| M/L | 5'4"-6'5" | 150-225 lbs. | 32" to 48" |
| XL | 5'4"-6'6" | 225-300 lbs. | 36" to 52" |
| 2XL | 5'4"-6'6" | 300-400 lbs. | 45" to 57" |
| XL/2XL | 5'2"-6'8" | 200-360 lbs. | 40" to 55" |
Front-Buckle Harness with Slide Thigh Buckle—Polyester | |||
| XXS/XS | 5’-6’2” | 0-150 lbs. | 24" to 32" |
| M/L | 5'4"-6'5" | 150-225 lbs. | 32" to 48" |
| XL | 5'4"-6'6" | 225-300 lbs. | 36" to 52" |
| 2XL | 5'4"-6'6" | 300-400 lbs. | 45" to 57" |
| XL/2XL | 5'2"-6'8" | 200-360 lbs. | 40" to 55" |
Front-Buckle Harness with Squeeze Release Thigh Buckle—Polyester | |||
| M/L | 5'0"-6'2" | 160-250 lbs. | 32" to 48" |
| XL/2XL | 5'2"-6'8" | 250-360 lbs. | 40" to 55" |
| 3XL | 5'6"-6'8" | 360-420 lbs. | 46" to 60" |
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Specifications Met | Features | Choose a Size | Each | |
Front-Buckle Harness with Traditional Thigh Buckle | |||||||
|---|---|---|---|---|---|---|---|
| 400 | Polyester | Back (1) | ANSI/ASSP Z359.11 | __ | 0000000 | 000000 | |
| 420 | Polyester | Back (1) | ANSI/ASSE A10.32, ANSI/ASSP Z359.11 | __ | XL/2XL | 00000000 | 00000 |
Front-Buckle Harness with Slide Thigh Buckle | |||||||
| 400 | Polyester | Back (1) | ANSI/ASSP Z359.11 | __ | 0000000 | 00000 | |
| 420 | Polyester | Back (1) | ANSI/ASSE A10.32, ANSI/ASSP Z359.11 | __ | XL/2XL | 00000000 | 00000 |
Front-Buckle Harness with Squeeze Release Thigh Buckle | |||||||
| 420 | Polyester | Back (1) | ANSI/ASSP Z359.11 | Padded Back | 0000000 | 000000 | |
Heat-Resistant Fall-Arrest Harnesses
Made of inherently flame-resistant Kevlar, these harnesses withstand temperatures up to 800° F. They keep you safe when you’re working at height where heat and sparks could weaken your harness. The D-ring on the back keeps you upright if you fall. When used properly with a lanyard and an anchor, these harnesses help you meet OSHA and ANSI safety standards.
Indicator stitching at impact points pops or tears during a fall, so you’ll know at a glance if the harness has been weakened by stress. When you’re not using your lanyard, clip it into one of the holders so it doesn’t drag or get caught.
| Harness Size | For Height | For Weight, lbs. | Waist Size | Harness Material | D-Ring Location (No. of) | Max. Temperature, °F | Capacity, lbs. | Specifications Met | Features | Each | |
Front-Buckle Harness—Slide Thigh Buckle | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| S | 4'10"-6'0" | 100-160 | 32" to 40" | Kevlar | Back (1) | 800° | 420 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 00000000 | 0000000 |
| M/L | 5'0"-6'2" | 140-280 | 36" to 48" | Kevlar | Back (1) | 800° | 420 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 00000000 | 000000 |
| XL | 5'2"-6'6" | 200-330 | 44" to 52" | Kevlar | Back (1) | 800° | 420 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502 | Impact-Indicating Stitching, Lanyard Holders | 00000000 | 000000 |
Electrical Arc Flash-Resistant Fall-Arrest Harnesses
These harnesses have leather-insulated metal components and meet ASTM F887 when used with an arc flash-resistant lanyard. They have a D-ring on the back that attaches to a lanyard. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | Waist Size | Specifications Met | Each | |
Front-Buckle Harness with Slide Thigh Buckle | |||||||
|---|---|---|---|---|---|---|---|
| 400 | Kevlar | Back (1) | XL | 32" to 56" | ANSI Z359.1, ASTM F887 | 000000 | 0000000 |
Fall-Arrest Harnesses for Positioning
D-rings on each hip provide a stable working position. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Harness Size (Waist) | For Height | For Weight, lbs. | Specifications Met | Each | |
Front-Buckle Harness with Slide Thigh Buckle | ||||||||
|---|---|---|---|---|---|---|---|---|
| 425 | Polyester | Back (1), Hips (2) | XL (36" to 52") | 5’2”-6’6” | 210-320 | ANSI/ASSP Z359.11 | 0000000 | 000000 |
Fall-Arrest Harnesses for Ladder Climbing and Positioning
These versatile harnesses have one D-ring on the chest for use with ladder-climbing systems as well as one D-ring on each hip to provide a stable working position. Attach harness to a ladder-climbing system using a carabiner. Harnesses have a D-ring on the back that attaches to a lanyard for fall protection. A complete fall-arrest system requires a lanyard, a harness, and an anchor. When used properly, the system meets applicable OSHA requirements.
| Capacity, lbs. | Harness Material | D-Ring Location (No. of) | Size | For Height | For Weight, lbs. | Waist Size | Specifications Met | Each | |
Front-Buckle Harness with Traditional Thigh Buckle | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 400 | Polyester | Back (1), Chest (1), Hips (2) | M/L | 5'4"-6'5" | 150-225 | 32" to 48" | ANSI Z359.1 | 00000000 | 0000000 |
Fall-Arrest Harnesses for Extracting
Stay straight up and down while being raised and lowered. D-rings on the shoulders of these harnesses keep you from pitching forward, so you're less likely to catch on obstacles than if you were wearing a typical fall-arrest harness. They also have a D-ring on the back for fall protection. To keep the harness feeling comfortable and lightweight when worn for long periods, there’s padding on the back and shoulders. As you bend, sit, and move, the leg straps keep pressure off your inner thighs and won’t ride up. The hardware is aluminum for good strength without weighing you down. When used with a lanyard and an anchor, these harnesses help you meet OSHA and ANSI safety standards.
Park an unused lanyard on one of the lanyard holders to prevent it from dragging or getting caught. The harnesses have an RFID tag, which is useful for taking inventory and tracking inspections. To make it easy to know when these harnesses should no longer be used, indicator stitching tears or pops during a fall.
Squeeze-release thigh buckles connect and disconnect more quickly than belt thigh buckles. They’re also more convenient because you don’t have to adjust the size each time you put them on.
Belt thigh buckles reduce the risk of loosening over time. They lock into a specific hole.
| Harness Size | For Height | For Weight, lbs. | Waist Size | Harness Material | D-Ring Location (No. of) | Capacity, lbs. | Specifications Met | Features | Each | |
Back and Shoulder Padding | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Front-Buckle Harness—Squeeze-Release Thigh Buckle | ||||||||||
| XS/S | 5'0"-5'8" | 100-150 | 24" to 32" | Polyester | Back (1), Shoulders (2) | 400 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | Lightweight Hardware, Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, RFID Tag | 00000000 | 0000000 |
| M/L | 5'4"-6'5" | 150-225 | 32" to 48" | Polyester | Back (1), Shoulders (2) | 400 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | Lightweight Hardware, Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, RFID Tag | 0000000 | 000000 |
| XL | 5'4"-6'6" | 225-300 | 36" to 52" | Polyester | Back (1), Shoulders (2) | 400 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | Lightweight Hardware, Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, RFID Tag | 00000000 | 000000 |
| 2XL | 5'4"-6'6" | 300-400 | 45" to 57" | Polyester | Back (1), Shoulders (2) | 400 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | Lightweight Hardware, Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, RFID Tag | 00000000 | 000000 |
Front-Buckle Harness—Belt Thigh Buckle | ||||||||||
| XS/S | 5'0"-5'8" | 100-150 | 24" to 32" | Polyester | Back (1), Shoulders (2) | 400 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | Lightweight Hardware, Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, RFID Tag | 00000000 | 000000 |
| M/L | 5'4"-6'5" | 150-225 | 32" to 48" | Polyester | Back (1), Shoulders (2) | 400 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | Lightweight Hardware, Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, RFID Tag | 00000000 | 000000 |
| XL | 5'4"-6'6" | 225-300 | 36" to 52" | Polyester | Back (1), Shoulders (2) | 400 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | Lightweight Hardware, Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, RFID Tag | 00000000 | 000000 |
| 2XL | 5'4"-6'6" | 300-400 | 45" to 57" | Polyester | Back (1), Shoulders (2) | 400 | ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140 | Lightweight Hardware, Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, RFID Tag | 00000000 | 000000 |