McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    3 Products

    Harsh-Environment Fall-Arrest Harnesses

    Image of ProductInUse. Front orientation. Fall-Arrest Harnesses. Harsh-Environment Fall-Arrest Harnesses.
    Image of ProductInUse. Back orientation. Fall-Arrest Harnesses. Harsh-Environment Fall-Arrest Harnesses.
    Image of ProductInUse. Top orientation. Contains Annotated. Fall-Arrest Harnesses. Harsh-Environment Fall-Arrest Harnesses.
    With thick webbing and a water-repellent treatment, these harnesses resist elements that could shorten the lifespan of a harness, such as heat, moisture, sweat, grease, and chemicals. Attach a lanyard to the D-ring on the back, and these harnesses will keep you upright if you fall. Unfold the leg support straps after a fall to ease pressure on your legs while you wait for help. When used together with a lanyard and an anchor, these harnesses help you meet OSHA and ANSI safety standards.
    Padding on the back and shoulders makes these harnesses feel lightweight and comfortable, even when worn for long periods. The leg straps are designed to stay horizontal, so they won’t ride up as you move. The hardware is aluminum for good strength without weighing you down. It also resists corrosion.
    With Back and Shoulder Padding
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Squeeze-Release Thigh Buckle.

    Squeeze-Release Thigh

    Buckle

    Impact-Indicating Stitching—Impact-indicating stitching is designed to tear during a fall or impact, so it’s easy to tell if a harness is still safe to use.
    Lanyard Holders—If you have an unused lanyard, clip it to one of the lanyard holders to keep it from dragging or catching on nearby equipment.
    Harness
    Size
    For Ht.
    Range
    For Wt.,
    lb.
    Waist
    Size
    Harness Material
    D-Ring Location
    (No. of)
    Wt. Cap.,
    lb.
    Specs. Met
    Features
    Each
    Front-Buckle Harnesses—Squeeze-Release Thigh Buckle
    L/XL68" to 77"240 to 31042" to 55"Polyester PlasticBack (1)420ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502Horizontal Leg Straps, Impact-Indicating Stitching, Lanyard Holders, Leg Support Straps, Lightweight Hardware9299N1140000000
     

    Electrical Arc-Flash-Resistant Fall-Arrest Harnesses for Climbing and Positioning

    Image of ProductInUse. Front orientation. Contains MultipleImages. Fall-Arrest Harnesses. Electrical Arc-Flash-Resistant Fall-Arrest Harnesses for Climbing and Positioning.
    Image of Specification. Slide Thigh Buckle. Front orientation. ZoomedIn view. Contains Border. Slide Thigh Buckle.

    Slide Thigh Buckle

    Image of ProductInUse. For Positioning. Front orientation. Fall-Arrest Harnesses. Electrical Arc-Flash-Resistant Fall-Arrest Harnesses for Climbing and Positioning.
    Image of ProductInUse. For Climbing. Side1 orientation. Fall-Arrest Harnesses. Electrical Arc-Flash-Resistant Fall-Arrest Harnesses for Climbing and Positioning.

    For Positioning

    For Climbing

    Our most versatile harness for tasks at height in areas with arc-flash and fire hazards—these harnesses have a D-ring on the back, chest, and each hip. Made with Nomex and Kevlar, they’re tested to ASTM F887 for arc-flash protection. Attach a lanyard to the D-ring on the back, and these harnesses will keep you upright if you fall. The chest D-ring lets you clip into ladder-climbing systems without the line getting in your way as you climb. Hip D-rings let you tether yourself close to your work, so your hands are free for tools and equipment. When used together with an anchor and a lanyard, these harnesses help you meet OSHA and ANSI safety standards.
    Impact-Indicating Stitching—Impact-indicating stitching is designed to tear during a fall or impact, so it’s easy to tell if a harness is still safe to use.
    Lanyard Holders—If you have an unused lanyard, clip it to one of the lanyard holders to keep it from dragging or catching on nearby equipment.
    Harness
    Size
    For Ht.
    Range
    For Wt.,
    lb.
    Waist
    Size
    Harness Material
    D-Ring Location (No. of)
    Wt. Cap.,
    lb.
    Specs. Met
    Features
    Each
    Front-Buckle Harnesses—Slide Thigh Buckle
    XL68" to 77"240 to 31046" to 55"Kevlar/Nomex FabricBack (1), Chest (1), Hips (2)420ASTM F887, ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1926.502Impact-Indicating Stitching, Lanyard Holders9267N140000000
     

    Fall-Arrest Harnesses for Tool Weight Distribution

    Image of System. Front orientation. Fall-Arrest Harnesses. Fall-Arrest Harnesses for Tool Weight Distribution.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Belt Thigh Buckle.

    Belt Thigh Buckle

    Image of ProductInUse. Front orientation. Fall-Arrest Harnesses. Fall-Arrest Harnesses for Tool Weight Distribution.
    Image of ProductInUse. Back orientation. Fall-Arrest Harnesses. Fall-Arrest Harnesses for Tool Weight Distribution.
    Handle heavy tools with more support than standard harnesses. Also known as derrick harnesses, they have a belt and built-in seat to distribute pressure and reduce fatigue. Keep your hands free for tools and tether yourself close to your work by clipping a positioning lanyard to the hip D-rings. These harnesses also have two back D-rings—one on the back of your waist and one between your shoulders. Use the bottom one with a tethering lanyard to prevent you from getting too close to the edge of the surface you're standing on. Attach a fall-arrest lanyard to the top D-ring on the back, and these harnesses will keep you upright if you fall. The D-ring also has an extension strap, so you can clip your fall-arrest lanyard on easily. When used together with a lanyard and anchor, these harnesses help you meet OSHA and ANSI safety standards.
    Impact-Indicating Stitching—Impact-indicating stitching is designed to tear during a fall or impact, so it’s easy to tell if a harness is still safe to use.
    Lanyard Holders—If you have an unused lanyard, clip it to one of the lanyard holders to keep it from dragging or catching on nearby equipment.
    Harness
    Size
    For Ht.
    Range
    For Wt.,
    lb.
    Waist
    Size
    Harness Material
    D-Ring Location
    (No. of)
    Wt. Cap.,
    lb.
    Specs. Met
    Features
    Each
    Front-Buckle Harnesses—Belt Thigh Buckle
    XL68" to 77"240 to 31046" to 55"Polyester PlasticBack (2), Hips (2)420ANSI/ASSP Z359.11, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502Impact-Indicating Stitching, Lanyard Holders, D-Ring Extension Strap9203N140000000
     
    back to top