1.3A Fans | McMaster-Carr

Also known as crossflow blowers, these create a wider stream of concentrated air than other equipment-cooling blowers to blow away the heat generated by electronic equipment, induction heaters, and high-wattage bulbs. Use them to keep heat-sensitive equipment such as electronic components cool. All have UL recognized components and are CSA certified.

	Overall, mm			Outlet, mm
	Ht.	Wd.	Dp.	Ht.	Wd.	Airflow, ft³/min	Temp. Range, ° F	Motor Speed, rpm	Current, amp		Each
Rectangle







				120V AC, Single Phase, 60 Hz—Wire Leads

				108	447.68	88.9	22.23	342.9	220	30 to 140	2,600	1.3	0000000	0000000

Direct-Drive Corrosion-Resistant Duct Fans

A galvanized steel housing offers good corrosion resistance. All of these direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Also known as axial duct fans, they install inline in ductwork for use as an exhaust, supply, or booster fan. The fans have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

							Overall
	For Duct Dia.	No. of Speeds	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Dia.	Ht.	Dp.	Max. Temp., ° F	Housing Material	Blade Material	Certification		Each
120V AC, Single Phase—Hardwire



		8"	1	435 ft³/min @ 3/8 in. H₂O 480 ft³/min @ 1/8 in. H₂O	Not Rated	2,950	1/5	13 3/8"	15 3/8"	6"	140	Galvanized Steel	Polypropylene	C-UL Listed, UL Listed	0000000	0000000


		120V AC, Single Phase—Plug In



				8"	1	435 ft³/min @ 3/8 in. H₂O 480 ft³/min @ 1/8 in. H₂O	Not Rated	2,950	1/5	13 3/8"	15 3/8"	6"	140	Galvanized Steel	Polypropylene	C-UL Listed, UL Listed	0000000	000000

Dust-Resistant Direct-Drive Wall-Mount Exhaust Fans

Style 3

Better suited for dirty, dusty, and damp environments than standard direct-drive fans, these have a totally enclosed motor enclosure. Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Use these fans to draw stagnant and humid air out of a room or area.

120V AC, Single Phase (Hardwire)—Totally Enclosed Air-Over (TEAO) Motor Enclosure

Style 3

								Overall
Style	Blade Dia.	Airflow, ft³/min	Volume (Sound) @ Distance	Drive Type	Motor Speed, rpm	No. of Speeds	Power, hp	Ht.	Wd.	Dp.	Wt., lb.	Ambient Temp., ° F	Frame Material	Blade Material		Each
3	8"	400	34 dBA @ 15 ft.	Direct	1,550	1	1/30	13"	13"	6 5/8"	15	104	Steel	Aluminum	0000000	0000000

Wall-Mount Office Fans

Keep cool with these personal-size wall-mount fans. The fan head tilts to direct air where it's needed.

	Blade					Overall					Mounting
	Dia.	Material	Airflow	No. of Speeds	Current	Ht.	Wd.	Dp.	Cord Lg., ft.	Guard Material	Fasteners Included	Hole Dia.	Certification	Includes		Each
120V AC, Single Phase—Three Blade Plug







				Non-Oscillating Fan, Tilting Fan

				20"	Aluminum	1,700 ft³/min	3	1.3 amp	29 1/2"	22"	20 1/2"	9	Steel	No	3/8"	C-UL Listed, UL Listed	Mounting Bracket	0000000	0000000

Belt-Drive Corrosion-Resistant Duct Fans

A 304 stainless steel housing offers good corrosion resistance. All of these belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged. They install inline in ductwork for use as an exhaust, supply, or booster fan. The fans have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

							Overall						Mounting
	For Duct Dia.	No. of Speeds	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Dia.	Ht.	Dp.	Max. Temp., ° F	Housing Material	Blade Material	Fasteners Included	Hole Dia.		Each
230V AC, 460V AC, Three Phase—Hardwire



		12"	1	1,600 ft³/min @ 3/8 in. H₂O 1,800 ft³/min @ 1/8 in. H₂O	60 dBA @ 15 ft.	3,050	3/4	14 1/16"	25 5/8"	20"	200	304 Stainless Steel	Stainless Steel	No	7/16"	0000000	000000000

Light Duty Direct-Drive Wall-Mount Exhaust Fans with Louvers

These light duty fans are designed for use without duct. They come complete with a movable-blade louver. The louvers are gravity operated so they open only when air flows through them, which prevents backdrafts. Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Use these fans to draw stagnant and humid air out of a room or area. All have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.

230/460V AC, Three Phase (Hardwire)—Totally Enclosed Motor Enclosure

Image of Product. Front orientation. Exhaust Fans. Light Duty Direct-Drive Wall-Mount Exhaust Fans with Louvers .

							For Opening		Overall
Blade Dia.	Airflow, ft³/min	Volume (Sound) @ Distance	Drive Type	Motor Speed, rpm	No. of Speeds	Power, hp	Ht.	Wd.	Ht.	Wd.	Dp.	Ambient Temp., ° F	Frame Material	Blade Material	Mounting Fasteners Included	Mounting Hole Dia.	Certification		Each
30"	5,745	Not Rated	Direct	850	1	1/2	30 1/2"	30 1/2"	33"	33"	15 1/4"	100	Steel	Aluminum	No	1/4"	UL Recognized Component	00000000	0000000

Hanging Box Fans

Easily hang these fans from your ceiling using the attached bracket and a mounting chain kit (sold separately). They're more powerful than our standard box fans. Made with a heavy duty 12-gauge welded wire mesh guard, these fans will stand up to tough environments. Plastic guard clips help reduce vibration between the housing and the guard, making these fans quieter. They require little maintenance thanks to their totally enclosed, high-efficiency motor and sealed ball bearings.

Fans with Totally Enclosed Motor Enclosure

Direct Drive—Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.

	Blade								Overall							Mounting
	Dia.	Material	Airflow	Volume	Motor Speed, rpm	No. of Speeds	Power, hp	Current	Ht.	Wd.	Dp.	Drive Type	Housing Material	Guard Material	Bearing Type	Fasteners Included	Hole Dia.	Includes		Each
240/460V AC, Three Phase—Hardwire







				Non-Oscillating Fan

				24"	Steel	5,000 ft³/min	Not Rated	850	1	1/2	2.6 amp 1.3 amp	30 1/2"	30 1/2"	16 1/4"	Direct	Galvanized Steel	Galvanized Steel	Ball	No	3/8"	Plastic Guard Clips	0000000	0000000


				36"	Steel	9,800 ft³/min	Not Rated	850	1	1/2	2.6 amp 1.3 amp	40 5/8"	40 5/8"	14 1/8"	Direct	Galvanized Steel	Galvanized Steel	Ball	No	3/8"	Plastic Guard Clips	0000000	000000

Mounting Chain Kits

Chains
3	72"	Six Nuts for Eyebolts, Six Threaded Connecting Links, Three Eyebolts	0000000	000000

Blowers

These blowers install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting. All blowers have an open dripproof motor enclosure for relatively clean, dry, indoor locations.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

With Rectangular Outlet and Round Inlet—Open Dripproof (ODP) Motor Enclosure

Image of Product. Front orientation. Blowers. Blowers.

	Blowers																			Replacement Wheels
					Outlet				Overall							Mounting
	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Ht.	Wd.	Inlet Dia.	Wheel Dia.	Ht.	Wd.	Dp.	Wt., lb.	Current	Temp. Range, ° F	Housing Material	Fasteners Included	Hole Dia.		Each		Each
120V AC







				Single Phase—Hardwire

				305 ft³/min @ 3/4 in. H₂O 520 ft³/min @ 1/4 in. H₂O	48 dB @ 15 ft.	1,725	1/4	7 1/4"	4 1/4"	6"	6"	14"	10 1/4"	13 3/4"	28	2.6 amp/1.3 amp	-4 to 180	Steel	No	3/8"	00000000	000000000	00000000	0000000

Exterior-Wall-Mount Exhaust Fans

Good when you don't have room to mount an exhaust fan inside your facility, these fans attach to openings in outside walls. Use them to draw stagnant and humid air out of a room or area.

Note: Airflow depends on the resistance created by louvers, filters, and ductwork in your system. This resistance, known as static pressure (SP), is measured in inches of water.

230/460V AC, Three Phase (Hardwire)—Totally Enclosed Motor Enclosure

Image of Product. Front orientation. Totally Enclosed Motor Enclosure. Exterior-Wall-Mount Exhaust Fans.

Fans with a totally enclosed motor enclosure can be used in dirty, dusty, and damp environments. They mount through the wall, so you'll need to cut a hole on the inside of the wall as well.

Direct Drive—Direct-drive fans have fewer moving parts than belt-drive fans, so they’re easier to maintain.

							For Opening			Overall
Blade Dia.	Airflow @ SP	Volume (Sound) @ Distance	Drive Type	Motor Speed, rpm	No. of Speeds	Power, hp	Dia.	Ht.	Wd.	Dia.	Dp.	Ambient Temp., ° F	Blade Material	Mounting Fasteners Included	Includes		Each
36"	6,700 ft³/min @ 0.2 in. H₂O 11,200 ft³/min @ 0 in. H₂O	Not Rated	Direct	825	3	1/2	36"	44"	44"	53"	57"	104	Steel	No	Louvers	0000000	000000000

Floor-Mount Fume Exhausters

Aluminum

Mount these exhausters to the floor to remove fumes, vapors, and fine dust particles from your space. They are commonly used in welding, soldering, and other operations that create fumes.

Totally Enclosed Motor Enclosure—Totally enclosed exhausters have an external fan for cooling. These exhausters offer more protection than open dripproof exhausters. They can be used in dirty, dusty, and damp environments, but are not airtight.

Airflow @ Static Pressure—Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

						Overall						Mounting
	Airflow @ SP	Volume (Sound) @ Distance	Power, hp	Inlet Dia.	Outlet Dia.	Ht.	Wd.	Dp.	Housing Material	Base Material	Wheel Material	Fasteners Included	For Screw Size	Hole Dia.	No. of Holes		Each
Totally Enclosed Motor Enclosure







				230V AC/460V AC, Three Phase—Hardwire

				450 ft³/min @ 1/2 in. H₂O	64 dBA @ 15 ft.	1/4	6"	6"	16 3/8"	12 1/4"	15 1/4"	Aluminum	Steel	Steel	No	3/8"	7/16"	4	00000000	000000000

Duct Kits

Single-Duct Kits for Exhausters with 6" Inlet Diameter—Single-duct kits (sold separately) maximize airflow at one fume collection point. They include a hose, a nozzle, and two clamps.

		Each
Single-Duct Kits for Exhausters with 6" Inlet Diameter	0000000	0000000

Chains
No. of	Lg.	Includes		Each
3	72"	Six Nuts for Eyebolts, Six Threaded Connecting Links, Three Eyebolts	0000000	000000