About Air Compressors
More
About Sound Levels
Measured in decibels (dB), volume ratings indicate how much noise equipment makes. Some common volume levels include a whisper @ 20 dB, a refrigerator @ 40 dB, a conversation @ 60 dB, and a light machine shop @ 90 dB. OSHA recommends hearing protection for exposure to 80 dB and greater.
About Exhaust Fans
More
Direct-Drive Upblast Roof-Mount Exhaust Fans
Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. These exhaust fans draw stagnant and humid air out through your roof and then expel it up and away from the roof surface. All fans have a disconnect switch to turn off the power for servicing.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Fans | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting Bases | |||||||||||||||
| Blade Dia. | Airflow @ Static Pressure | Volume | Motor Speed, rpm | Power, hp | Dia. | Ht. | Base Wd. | Wt., lbs. | Max. Ambient Temperature | Housing Material | Specifications Met | Each | Each | |||
Open Dripproof Motor Enclosure | ||||||||||||||||
120V AC, Single Phase—Hardwire | ||||||||||||||||
| 1 | 11" | 400 cfm @ 1/2 in. of H₂O 710 cfm @ 0 in. of H₂O | 60 dBA @ 5 ft. | 1,625 | 3/16 | 22" | 18" | 19" | 43 | 300° F | Aluminum | AMCA Rated, ETL Listed | 0000000 | 0000000 | 0000000 | 0000000 |
Direct-Drive Corrosion-Resistant Duct Fans
A galvanized steel housing offers good corrosion resistance. All of these direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Also known as axial duct fans, they install inline in ductwork for use as an exhaust, supply, or booster fan. The fans have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Duct Dia. | Airflow @ Static Pressure | Motor Speed, rpm | Power, hp | Dia. | Ht. | Dp. | Max. Temp., °F | Housing Material | Blade Material | Specifications Met | Each | |
120V AC, Single Phase—Hardwire | ||||||||||||
| 12" | 620 cfm @ 3/8 in. of H₂O 700 cfm @ 1/8 in. of H₂O | 2,600 | 1/4 | 16" | 18" | 8 1/4" | 140° | Galvanized Steel | Polypropylene Plastic | C-UL Listed, UL Listed | 0000000 | 0000000 |
High-Output Hazardous Location Spark-Resistant Blowers
Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard hazardous location spark-resistant blowers can handle. They have an explosion-proof motor that is UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G hazardous locations. They also have an aluminum housing for spark resistance. These blowers install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Airflow @ Static Pressure | Volume | Motor Speed, rpm | Power, hp | Outlet Dia. | Inlet Dia. | Wheel Dia. | Ht. | Wd. | Dp. | Wt., lbs. | Temp. Range, °F | Mount. Fasteners Included | Mount. Hole Dia. | Each | |
With Round Outlet and Inlet | |||||||||||||||
120/230V AC, Single Phase—Hardwire | |||||||||||||||
| 460 cfm @ 5 in. of H₂O 520 cfm @ 3 in. of H₂O | 80 dBA @ 15 ft. | 3,450 | 1 | 5" | 6" | 9 3/4" | 18" | 14 1/2" | 16 1/8" | 80 | 0° to 100° | No | 7/16" | 0000000 | 000000000 |
| 530 cfm @ 5 in. of H₂O 685 cfm @ 3 in. of H₂O | 80 dBA @ 15 ft. | 3,450 | 1 1/2 | 5" | 6" | 10 5/8" | 18" | 14 1/2" | 16 1/8" | 88 | 0° to 100° | No | 7/16" | 0000000 | 00000000 |
230/460V AC, Three Phase—Hardwire | |||||||||||||||
| 460 cfm @ 5 in. of H₂O 520 cfm @ 3 in. of H₂O | 80 dBA @ 15 ft. | 3,450 | 1 | 5" | 6" | 9 3/4" | 18" | 14 1/2" | 16 1/8" | 65 | 0° to 100° | No | 7/16" | 0000000 | 00000000 |
| 530 cfm @ 5 in. of H₂O 685 cfm @ 3 in. of H₂O | 80 dBA @ 15 ft. | 3,450 | 1 1/2 | 5" | 6" | 10 5/8" | 18" | 14 1/2" | 16 1/8" | 73 | 0° to 100° | No | 7/16" | 0000000 | 00000000 |
High-Output Spark-Resistant Blowers
Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard spark-resistant blowers can handle. They have an aluminum housing for spark resistance. They install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting. All blowers have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Airflow @ Static Pressure | Volume | Motor Speed, rpm | Power, hp | Outlet Dia. | Inlet Dia. | Wheel Dia. | Ht. | Wd. | Dp. | Wt., lbs. | Temp. Range, °F | Mount. Fasteners Included | Mount. Hole Dia. | Each | |
With Round Outlet and Inlet—Totally Enclosed Motor Enclosure | |||||||||||||||
120/230V AC, Single Phase—Hardwire | |||||||||||||||
| 460 cfm @ 5 in. of H₂O 520 cfm @ 3 in. of H₂O | 80 dBA @ 15 ft. | 3,450 | 1 | 5" | 6" | 9 3/4" | 18" | 14 1/2" | 16 1/8" | 70 | 0° to 100° | No | 7/16" | 0000000 | 000000000 |
| 530 cfm @ 5 in. of H₂O 685 cfm @ 3 in. of H₂O | 80 dBA @ 15 ft. | 3,450 | 1 1/2 | 5" | 6" | 10 5/8" | 18" | 14 1/2" | 16 1/8" | 55 | 0° to 100° | No | 7/16" | 0000000 | 00000000 |
230/460V AC, Three Phase—Hardwire | |||||||||||||||
| 460 cfm @ 5 in. of H₂O 520 cfm @ 3 in. of H₂O | 80 dBA @ 15 ft. | 3,450 | 1 | 5" | 6" | 9 3/4" | 18" | 14 1/2" | 16 1/8" | 65 | 0° to 100° | No | 7/16" | 0000000 | 00000000 |
| 530 cfm @ 5 in. of H₂O 685 cfm @ 3 in. of H₂O | 80 dBA @ 15 ft. | 3,450 | 1 1/2 | 5" | 6" | 10 5/8" | 18" | 14 1/2" | 16 1/8" | 73 | 0° to 100° | No | 7/16" | 0000000 | 00000000 |
High-Flow Low-Pressure Compressed Air Blowers
Also known as regenerative blowers, use these to produce high-flow compressed air with low pressure or vacuum to operate pump drives, lift tables, and conveying systems. Compressed air blowers are also used for drying, exhausting, and aeration.
Air circulates inside the blower housing to compress air, which generates pressure or vacuum. Single-stage blowers circulate air once and then exhaust.
Inverter-rated blowers have a motor that can run at slow speeds without overheating, so they can be used with a motor speed control (variable frequency drive).
For technical drawings and 3-D models, click on a part number.
Blowers | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Pipe Size | Air-Intake Filters | Relief Valves | ||||||||||||||
| Maximum Pressure | Max. Flow Rate @ psi | Vacuum Rating | hp | Full Load Current | Vol., dBA | Lg. | Wd. | Ht. | Temp. Range, ° F | Inlet | Outlet | Each | Each | Each | |||
Three Phase, 208/230/460V AC (Inverter Rated) | |||||||||||||||||
NPT Female Inlet and Outlet | |||||||||||||||||
| 4 psi 110 in. of H2O | 265 cfm @ 0 | 6.6 in. of Hg 90 in. of H2O | 6 | 16.0 A @ 208 V AC 15.0 A @ 230 V AC 7.5 A @ 460 V AC | 79 | 17" | 17" | 18" | 32° to 100° | 2 | 2 | 0000000 | 000000000 | 00000000 | 0000000 | 00000000 | 0000000 |
High-Volume Low-Heat Air Blowers
Combine high-volume airflow with low-heat output for warming and drying. These blowers tilt to direct airflow.
Blowers with removable mounting feet have two feet that you can detach and use as hooks for hanging.
Blowers with a fixed airflow rate are portable, so you can carry them from job to job.
O'all | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Temp. Setting, °F | Airflow, cfm | Tip Dia. | Nozzle Lg. | Lg. | Wd. | Ht. | Ht. Adjustability | Wattage, W | Heating Element Material | Housing Material | Plug Type | NEMA Style | Features | Each | ||
120V AC | ||||||||||||||||
Fixed Airflow | ||||||||||||||||
| A | 115°, 140° | 205 | 3" | 4 3/4" | 13" | 9" | 18" | Fixed | 1,800 | Mica | Aluminum | Three Prong | 5-15 | __ | 0000000 | 0000000 |
| B | 115°, 140° | 205 | 3" | 4 3/4" | 13" | 9" | 18" | Fixed | 1,800 | Mica | Steel | Three Prong | 5-15 | Removable Mounting Feet | 0000000 | 000000 |
| Replacement Heating Element | 0000000 | Each | 0000000 |