About Sound Levels
Measured in decibels (dB), volume ratings indicate how much noise equipment makes. Some common volume levels include a whisper @ 20 dB, a refrigerator @ 40 dB, a conversation @ 60 dB, and a light machine shop @ 90 dB. OSHA recommends hearing protection for exposure to 80 dB and greater.
Supply-Side Guards for Wall-Mount Exhaust Fans
Protect the supply side of your wall-mount exhaust fans from debris.
Overall | |||||||
|---|---|---|---|---|---|---|---|
| For Blade Dia. | Ht. | Wd. | Dp. | Material | Mounting Fasteners Included | Each | |
| 14", 16" | 22 1/4" | 22 1/4" | 16" | Galvanized Steel | Yes | 00000000 | 0000000 |
High-Output Blowers
Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard blowers can handle. They install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, drying, ventilating, and exhausting. Blowers that weigh 280 lbs. or less can also be used for material conveying. Blowers with an open dripproof motor enclosure are for relatively clean, dry, indoor locations. Blowers with a totally enclosed motor enclosure can be used in dirty, dusty, and damp environments.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water. It is the responsibility of users in California to follow local energy efficiency regulations. Operating these blowers at a high airflow may violate these regulations.
High-Output Blowers | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Outlet | Overall | Replacement Wheels | ||||||||||||||
| Airflow @ Static Pressure | Volume | Motor Speed, rpm | Power, hp | Ht. | Wd. | Inlet Dia. | Wheel Dia. | Ht. | Wd. | Dp. | Wt., lbs. | Temp. Range, °F | Each | Each | ||
Totally Enclosed Motor Enclosure | ||||||||||||||||
230/460V AC, Three Phase—Hardwire | ||||||||||||||||
| 1,600 cfm @ 4 1/4 in. of H₂O 1,800 cfm @ 3 1/4 in. of H₂O | 73 dBA @ 15 ft. | 3,550 | 5 | 7" | 5 3/4" | 8" | 12" | 22 1/4" | 20 9/16" | 17 5/8" | 224 | -15° to 180° | 00000000 | 000000000 | 00000000 | 0000000 |
Open Dripproof Motor Enclosure | ||||||||||||||||
230/460V AC, Three Phase—Hardwire | ||||||||||||||||
| 1,600 cfm @ 4 1/4 in. of H₂O 1,800 cfm @ 3 1/4 in. of H₂O | 73 dBA @ 15 ft. | 3,450 | 5 | 7" | 5 5/8" | 8" | 12" | 22 1/4" | 20 9/16" | 17 5/8" | 197 | -15° to 180° | 00000000 | 00000000 | 00000000 | 000000 |
Corrosion-Resistant Blowers
A 304 stainless steel housing offers good corrosion resistance. These blowers install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting. All blowers have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Outlet | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Airflow @ Static Pressure | Volume | Motor Speed, rpm | Power, hp | Ht. | Wd. | Inlet Dia. | Wheel Dia. | Ht. | Wd. | Dp. | Temp. Range, °F | Mount. Fasteners Included | Mount. Hole Dia. | Each | |
With Rectangular Outlet and Round Inlet—Totally Enclosed Motor Enclosure | |||||||||||||||
230/460V AC, Three Phase—Hardwire | |||||||||||||||
| 1,600 cfm @ 4 1/4 in. of H₂O 1,800 cfm @ 3 1/4 in. of H₂O | 73 dBA @ 15 ft. | 3,550 | 5 | 7" | 5 5/8" | 5" | 12" | 22 1/4" | 20 9/16" | 17 5/8" | -15° to 180° | No | 1/2" | 0000000 | 000000000 |