E137077 Fans | McMaster-Carr

Filter by

Shape

Oblong

Round

Square

System of Measurement

Voltage

Overall Height

Environment

Overall Width

Overall Depth

Frequency

Hazardous Location Protection Type

Increased Safety

Nonsparking

Electrical Connection

Quick-Disconnect Terminal

Width

Frame Material

Power Source

Material

Certification

C-UL Recognized Component

CE Marked

TUV Rheinland Certified

UL Listed

UL Recognized Component

Airflow

Less than 10,000 ft³/min

Height

Hazardous Location Rating

ATEX Hazardous Location Zone Rating

IEC Zone 2 Groups IIC, IIB, IIA

Depth

Maximum Temperature

DFARS Specialty Metals

Exempt

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Export Control Classification Number (ECCN)

REACH

UL File Number

RoHS

15 Products

Hazardous Location Equipment-Cooling Fans

Safely cool electronics and equipment where explosive gases could be present due to equipment failure. ATEX certified, these fans meet European standards for hazardous locations. They’re also IP rated, so they seal out dust and are protected from water if briefly submersed. All have ball bearings that decrease noise for quiet operation. Their bearings reduce heat as they run as well, extending their life.

Square

					Overall						Mounting
	Airflow	Temp. Range, ° F	Volume	Current	Ht.	Wd.	Dp.	Frame Material	Blade Material	Hazardous Location Rating	Fasteners Included	Hole Dia.	Enclosure Rating	Certification		Each
100V AC to 240V AC, Single Phase, 50Hz/60Hz—Quick-Disconnect Terminal



		124 ft³/min	0 to 155	49 dBA	0.18 amp	4.72" (120 mm)	4.72" (120 mm)	1.5" (38 mm)	Plastic	Plastic	ATEX II 3 G Ex Ec IIC Gc; IEC Zone 2 Groups IIC, IIB, IIA	No	0.17" (4.3 mm)	IP68	C-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component	7311N15	000000


		100V AC to 240V AC, Single Phase, 50Hz/60Hz—Wire Leads



				124 ft³/min	0 to 155	49 dBA	0.18 amp	4.72" (120 mm)	4.72" (120 mm)	1.5" (38 mm)	Plastic	Plastic	ATEX II 3 G Ex Ec IIC Gc; IEC Zone 2 Groups IIC, IIB, IIA	No	0.17" (4.3 mm)	IP68	C-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component	7311N16	00000


				115V AC to 230V AC, Single Phase, 50Hz/60Hz—Quick-Disconnect Terminal



						50 ft³/min	0 to 155	43 dBA	0.08 amp	3.62" (92 mm)	3.62" (92 mm)	1.5" (38 mm)	Plastic	Plastic	ATEX II 3 G Ex nA IIC Gc; IEC Zone 2 Groups IIC, IIB, IIA	No	0.17" (4.3 mm)	IP68	C-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component	7311N22	00000


						106 ft³/min	0 to 155	43 dBA	0.08 amp	4.72" (120 mm)	4.72" (120 mm)	1.5" (38 mm)	Plastic	Plastic	ATEX II 3 G Ex nA IIC Gc; IEC Zone 2 Groups IIC, IIB, IIA	No	0.17" (4.3 mm)	IP68	C-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component	7311N23	00000


						115V AC to 230V AC, Single Phase, 50Hz/60Hz—Wire Leads



								19 ft³/min	0 to 155	31 dBA	0.04 amp	2.36" (60 mm)	2.36" (60 mm)	0.98" (25 mm)	Plastic	Plastic	ATEX II 3 G Ex nA IIC Gc; IEC Zone 2 Groups IIC, IIB, IIA	No	0.17" (4.3 mm)	IP68	C-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component	7311N13	00000


								50 ft³/min	0 to 155	43 dBA	0.08 amp	3.62" (92 mm)	3.62" (92 mm)	1.5" (38 mm)	Plastic	Plastic	ATEX II 3 G Ex nA IIC Gc; IEC Zone 2 Groups IIC, IIB, IIA	No	0.17" (4.3 mm)	IP68	C-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component	7311N14	00000

Oblong

					Overall						Mounting
	Airflow	Temp. Range, ° F	Volume	Current	Ht.	Wd.	Dp.	Frame Material	Blade Material	Hazardous Location Rating	Fasteners Included	Hole Dia.	Enclosure Rating	Certification		Each
115V AC to 230V AC, Single Phase, 50Hz/60Hz—Wire Leads



		220 ft³/min	-4 to 158	57 dBA	0.27 amp	5.91" (150 mm)	6.77" (172 mm)	2.01" (51 mm)	Aluminum	Plastic	ATEX II 3 G Ex nA IIC Gc; IEC Zone 2 Groups IIC, IIB, IIA	No	0.16" (4.3 mm)	IP68	C-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component	7311N24	000000

Hazardous Location Equipment-Cooling Fan Kits

Cool electronics and other sensitive equipment in potentially unsafe areas. These fans are non-sparking, so they’re safe for use around gas and explosive dust. They also withstand washdowns, occasional submersion in water, and wet weather. They’re not for use in mines. Ball bearings reduce the heat that’s generated to prolong fan lifespan.

Square

Image of Product. Front orientation. Fans. Hazardous Location Equipment-Cooling Fan Kits.

	Overall								Mounting
	Ht.	Wd.	Dp.	Airflow, ft³/min	Temp. Range, ° F	Volume (Sound), dBA	Current, amp	Frame Material	Fasteners Included	Hole Dia.	Hazardous Location Rating	Enclosure Rating	Certification		Each
304 Stainless Steel Guard







				120V AC, Single Phase, 50 Hz, 60 Hz—Two Blade Plug

				4.72" (120 mm)	4.72" (120 mm)	1.5" (38 mm)	106	0 to 155	43	0.08	Aluminum	No	0.17" (4.3 mm)	ATEX II 3 G Ex nA IIC Gc; IEC Zone 2 Groups IIC, IIB, IIA	IP68	C-UL Listed, UL Listed, UL Recognized Component	5935N11	0000000

High-Temperature Equipment-Cooling Fans

While standard equipment-cooling fan motors degrade when used in high-temperature areas, these fans run continuously without issue in temperatures up to 190° F. They are made entirely of metal and are lubricated with high-temperature bearing grease. This means they are often used to cool electronics near higher temperature areas, such as near commercial ovens. These fans have ball bearings that reduce friction as they run, extending their life. Their bearings also decrease noise for quiet operation.

Square

					Overall						Mounting
	Airflow	Temp. Range, ° F	Volume	Current	Ht.	Wd.	Dp.	Frame Material	Blade Material	Bearing Type	Fasteners Included	Hole Dia.	Certification		Each
115V AC, Single Phase, 60 Hz—Quick-Disconnect Terminal



		34 ft³/min	-40 to 190	40 dBA	0.13 amp	80 mm	80 mm	38 mm	Aluminum	Steel	Ball	No	4.3 mm	C-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component	7700N24	000000


		51 ft³/min	-40 to 190	42 dBA	0.12 amp	92 mm	92 mm	38 mm	Aluminum	Steel	Ball	No	4.3 mm	C-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component	7700N26	00000


		230V AC, Single Phase, 60 Hz—Quick-Disconnect Terminal



				34 ft³/min	-40 to 190	40 dBA	0.07 amp	80 mm	80 mm	38 mm	Aluminum	Steel	Ball	No	4.3 mm	C-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component	7700N25	00000


				103 ft³/min	-40 to 190	46 dBA	0.09 amp	120 mm	120 mm	38 mm	Aluminum	Steel	Ball	No	4.3 mm	C-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component	7700N21	00000

Round

					Overall					Mounting
	Airflow	Temp. Range, ° F	Volume	Current	Dia.	Dp.	Frame Material	Blade Material	Bearing Type	Fasteners Included	Hole Dia.	Certification		Each
115V AC, Single Phase, 60 Hz—Quick-Disconnect Terminal



		230 ft³/min	-40 to 190	53 dBA	0.47 amp	150 mm	55 mm	Aluminum	Steel	Ball	No	4.2 mm	C-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component	7700N22	000000


		230V AC, Single Phase, 60 Hz—Quick-Disconnect Terminal



				230 ft³/min	-40 to 190	53 dBA	0.23 amp	150 mm	55 mm	Aluminum	Steel	Ball	No	4.2 mm	C-UL Recognized Component, CE Marked, TUV Rheinland Certified, UL Recognized Component	7700N23	00000

DC Equipment-Cooling Fans

Running on 48V DC power or lower, these compact fans fit inside electronics and other small, heat-sensitive equipment to keep things cool. They're also known as muffin fans. Some meet American and Canadian safety standards.

Square

Plain Bearing—Fans with plain bearings are good for less demanding applications, such as cooling prototypes or parts that aren’t used often.

					Overall						Mounting
	Airflow	Temp. Range, ° F	Volume	Current	Ht.	Wd.	Dp.	Frame Material	Blade Material	Bearing Type	Fasteners Included	Hole Dia.	Certification		Each
24V DC—Wire Leads



		40 ft³/min	15 to 155	23 dBA	0.12 amp	3.62" (92 mm)	3.62" (92 mm)	0.98" (25 mm)	Plastic	Plastic	Plain	No	0.18" (4.6 mm)	C-UL Recognized Component, UL Recognized Component	8774N35	000000