Filter by
Certification
Inlet Thread Type
Inlet Pipe Size
DFARS Compliance
Outlet Thread Type
Housing Material
About Air Compressors
More
High-Flow Low-Pressure Compressed Air Blowers
Also known as regenerative blowers, use these to produce high-flow compressed air with low pressure or vacuum to operate pump drives, lift tables, and conveying systems. Compressed air blowers are also used for drying, exhausting, and aeration.
Air circulates inside the blower housing to compress air, which generates pressure or vacuum. Single-stage blowers circulate air once and then exhaust.
Inverter-rated blowers have a motor that can run at slow speeds without overheating, so they can be used with a motor speed control (variable frequency drive).
For technical drawings and 3-D models, click on a part number.
Single Stage
Single Stage Blower
Overall | Pipe Size | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Maximum Pressure | Max. Flow Rate @ psi | Vacuum Rating | hp | Full Load Current | Vol. | Lg. | Wd. | Ht. | Temp. Range, °F | Inlet | Outlet | Each | |
Three Phase, 220/275/380/480V AC (Inverter Rated) | |||||||||||||
BSPP Female Inlet and Outlet | |||||||||||||
| 2 psi 64 in. of H₂O | 57 cfm @ 0 | 4.4 in. of Hg 60 in. of H₂O | 1/2 | 2.6 A @ 200 V AC 2.6 A @ 275 V AC 1.5 A @ 380 V AC 1.5 A @ 480 V AC | 56 dBA | 10" | 10" | 10" | 5° to 100° | 1 1/4 | 1 1/4 | 0000000 | 000000000 |