About Structural Adhesives
More
About Paint and Protective Coatings
More
Quick-Set Epoxy Structural Adhesives
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP100NS is nonsagging, so it won't drip from vertical or overhead surfaces.
HY4090 is a blend of epoxy and instant-bond adhesive for a balance of strength, cure speed, and temperature resistance.
50132 works especially well on plastics and composites.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| DP100 | 1.64 | Cartridge | 5 min. | 48 hrs. | 750 | 2 | 1:1 | Thick Liquid (12,000 cP) | -65° to 320° | Clear | Metal, Plastic, Rubber | 0000000 | 000000 |
| DP100 | 6.76 | Cartridge | 5 min. | 48 hrs. | 750 | 2 | 1:1 | Thick Liquid (12,000 cP) | -65° to 320° | Clear | Metal, Plastic, Rubber | 0000000 | 00000 |
| DP100NS | 1.64 | Cartridge | 5 min. | 48 hrs. | 840 | 2 | 1:1 | Paste (93,750 cP) | -65° to 320° | Clear | Metal, Plastic, Rubber | 0000000 | 00000 |
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| HY4090 | 1.69 | Cartridge | 3 min. | 7 days | 2,420 | Not Rated | 1:1 | Thick Liquid (19,000 cP) | -65° to 300° | Gray | Metal, Plastic, Rubber, Composites, Masonry, Wood | 00000000 | 000000 |
| HY4090 | 1.69 | Cartridge | 3 min. | 7 days | 2,420 | Not Rated | 1:1 | Thick Liquid (19,000 cP) | -65° to 300° | Off-White | Metal, Plastic, Rubber, Composites, Masonry, Wood | 00000000 | 00000 |
| HY4090 | 13.5 | Cartridge | 3 min. | 7 days | 2,420 | Not Rated | 1:1 | Thick Liquid (19,000 cP) | -65° to 300° | Off-White | Metal, Plastic, Rubber, Composites, Masonry, Wood | 0000000 | 000000 |
Mfr. Model | Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| 1 Minute Epoxy | 14277 | 1.69 | Cartridge | 60 sec. | 2 hrs. | 1,600 | 2 | 1:1 | Gel (70,000 cP) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 00000000 | 000000 |
| 5 Minute Epoxy | 14200 | 15 | Bottle | 5 min. | 12 hrs. | 1,900 | 2 | 1:1 | Thick Liquid (10,000 cP) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 000000 | 00000 |
| 5 Minute Epoxy | 14240 | 0.84 | Syringe | 5 min. | 48 hrs. | 2,500 | 2 | 1:1 | Gel (Not Rated) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 0000000 | 00000 |
| 5 Minute Epoxy | 14250 | 0.84 | Syringe | 5 min. | 12 hrs. | 1,900 | 2 | 1:1 | Thick Liquid (10,000 cP) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 0000000 | 00000 |
| 5 Minute Epoxy | 14265 | 1.69 | Cartridge | 5 min. | 48 hrs. | 2,500 | 2 | 1:1 | Gel (Not Rated) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 00000000 | 00000 |
| 5 Minute Epoxy | 14270 | 1.69 | Cartridge | 5 min. | 12 hrs. | 1,900 | 2 | 1:1 | Thick Liquid (10,000 cP) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 00000000 | 00000 |
Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| 0.84 | Syringe | 5 min. | 24 hrs. | 3,300 | Not Rated | 1:1 | Thick Liquid (10,000 cP) | -10° to 200° | Clear | Metal, Plastic, Rubber, Glass, Wood | 0000000 | 00000 |
Mfr. Model | Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| KwikWeld | 8271 | 10 | Tube | 6 min. | 6 hrs. | 1,000 | Not Rated | 1:1 | Paste (250,000 cP) | Not Rated to 300° | Gray | Metal, Plastic, Rubber, Composites | 0000000 | 000000 |
| KwikWeld | 8276 | 2 | Tube | 6 min. | 6 hrs. | 1,000 | Not Rated | 1:1 | Paste (250,000 cP) | Not Rated to 300° | Gray | Metal, Plastic, Rubber, Composites | 0000000 | 0000 |
| PlasticWeld | 50132 | 0.85 | Syringe | 5 min. | 60 min. | 2,000 | Not Rated | 1:1 | Thick Liquid (9,000 cP) | -20° to 300° | Yellow | Metal, Plastic, Rubber, Composites, Masonry, Wood | 000000 | 0000 |
Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| 6.76 | Cartridge | 3 min. | 24 hrs. | 2,500 | Not Rated | 1:1 | Gel (13,000 cP) | -40° to 200° | Amber | Metal, Plastic, Rubber, Composites | 0000000 | 000000 |
Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| 0.47 | Syringe | 4 min. | 24 hrs. | 2,500 | Not Rated | 1:1 | Gel (13,000 cP) | -40° to 200° | Amber | Metal, Plastic, Rubber | 0000000 | 000000 |
| 1.65 | Syringe | 60 sec. | 3 hrs. | 2,500 | 12 | 1:1 | Thick Liquid (15,000 cP) | -45° to 250° | Amber | Metal, Plastic, Rubber | 0000000 | 00000 |
| 6.5 | Tube | 4 min. | 24 hrs. | 2,520 | Not Rated | 1:1 | Paste (Not Rated) | -65° to 260° | Amber | Metal, Plastic, Rubber | 0000000 | 00000 |
| 8 | Bottle | 3 min. | 24 hrs. | 3,000 | 1 | 1:1 | Thick Liquid (40,000 cP) | 15° to 180° | Amber | Metal, Plastic, Rubber, Glass, Masonry | 0000000 | 00000 |
| 32 | Bottle | 3 min. | 24 hrs. | 3,000 | 1 | 1:1 | Thick Liquid (40,000 cP) | 15° to 180° | Amber | Metal, Plastic, Rubber, Glass, Masonry | 0000000 | 000000 |
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Pkg. Qty. | Pkg. | |
| 0.1 | One-Time-Use Packet | 3 min. | 24 hrs. | 3,000 | 1 | 1:1 | Thick Liquid (40,000 cP) | 15° to 180° | Amber | Metal, Plastic, Rubber, Masonry | 10 | 0000000 | 000000 |
| 0.1 | One-Time-Use Packet | 3 min. | 24 hrs. | 3,710 | 2 | 1:1 | Paste (400,000 cP) | 15° to 180° | White | Metal, Masonry, Wood | 10 | 0000000 | 00000 |
| Each | ||
| Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Step Tip) | 0000000 | 00000 |
| Mixer Nozzle for 1.64 fl. oz. 3M Cartridges (Taper Tip) | 0000000 | 0000 |
| Mixer Nozzle for 6.76 fl. oz. 3M Cartridges | 0000000 | 0000 |
| Mixer Nozzle for 1.69 fl. oz. Loctite® Cartridges | 000000000 | 0000 |
| Mixer Nozzle for 1.69 fl. oz. Devcon Cartridges | 00000000 | 0000 |
| Mixer Nozzle for 6.76 fl. oz. Cartridges | 0000000 | 0000 |
| Mixer Nozzle for 6.76 fl. oz. and 13.5 fl. oz. Cartridges | 000000000 | 0000 |
| Replacement Plunger for 1.64 fl. oz. 3M Cartridges | 0000000 | 00000 |
| Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |
| Dispensing Gun for 6.76 fl. oz. 3M Cartridges | 0000000 | 000000 |
| Air-Powered Dispensing Gun for 1.64 fl. oz. 3M Cartridges | 0000000 | 000000 |
| Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges | 000000000 | 000000 |
| Dispensing Gun for 1.69 fl. oz. Cartridges | 00000000 | 00000 |
| Dispensing Gun for 13.5 fl. oz. Cartridges | 0000000 | 000000 |
| Dispensing Gun for 6.7 fl. oz Cartridges | 0000000 | 00000 |
Epoxy Structural Adhesive Assortments
Easily handle a variety of small jobs. Assortments include eight different epoxies in 0.1-oz. packets. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
| Epoxy Type (For Joining) | Each | |
| Easy Flowing (Composites, Metal) Fast Hardening (Masonry, Metal, Rubber) For Vertical Surfaces (Masonry, Metal, Wood) General Purpose (Masonry, Metal, Plastic, Rubber) High Strength (Metal, Rubber) Machinable Surface Filler (Composites, Metal) Optically Clear (Glass, Metal) Water Resistant (Composites, Masonry, Metal) | 0000000 | 000000 |
Toughened Epoxy Structural Adhesives
Toughened adhesives are blended with rubber particles for better impact resistance than standard epoxies. They form flexible, resilient bonds. The most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| DP420 | 6.76 | Cartridge | 20 min. | 24 hrs. | 280 | 50 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 0000000 |
| DP460 | 6.76 | Cartridge | 60 min. | 24 hrs. | 2,500 | 60 | 2:1 | Thick Liquid (30,000 cP) | -65° to 350° | Off-White | Metal, Plastic, Composites | 0000000 | 000000 |
Epoxy Structural Adhesives
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
DP110, 14310, 14260, and 305-1/2 bond dissimilar materials.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| DP110 | 6.76 | Cartridge | 8 min. | 48 hrs. | 2,500 | 20 | 1:1 | Thick Liquid (65,000 cP) | -65° to 350° | Gray | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 0000000 | 000000 |
| DP190 | 6.76 | Cartridge | 60 min. | 14 days | 850 | 20 | 1:1 | Thick Liquid (8,000 cP) | -65° to 350° | Clear | Metal, Plastic, Rubber, Masonry | 00000000 | 00000 |
Slow-Set Epoxy Structural Adhesives
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
| DP190 | 6.76 fl. oz. | Cartridge | 90 min. | 7 days | 1,400 | 20 | 1:1 | Thick Liquid (86,250 cP) | -65° to 350° | Metal, Plastic, Rubber, Masonry | 0000000 | 000000 |
Epoxy Potting Compounds
Encase electronic assemblies in a layer of epoxy for protection from dust, chemicals, moisture, mechanical shock, and vibration. The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
Dry Time | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch | Overall | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Specifications Met | For Use On | Choose a Color | Each | |
| DP270 | 6.8 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | 00000000 | 000000 | |