Filter by
Drive Style
System of Measurement
Tip Type
Fastener Head Type
Rounded Head Style
For Use In
Threading
Material
Thread Direction
Tapping Method
Shank Cross Section
Maximum Drilling Thickness
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Rounded Head Profile
Tapping Screw Type
About Tapping Screws
More
Tri-Wing® Rounded Head Screws for Sheet Metal
These screws require a Tri-Wing® driver for installation and removal. Made from 18-8 stainless steel, they are chemical resistant and may be mildly magnetic. They penetrate 0.025" and thinner sheet metal. Length is measured from under the head.
Head | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Dia. | Ht. | Drive Size | Drill Bit Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel  | ||||||||
No. 6 | ||||||||
| 1/2" | 0.27" | 0.082" | No. 3 | No. 32 | 18 | 50 | 000000000 | 000000 |
| 3/4" | 0.27" | 0.082" | No. 3 | No. 32 | 18 | 50 | 000000000 | 00000 |
| 1" | 0.27" | 0.082" | No. 3 | No. 32 | 18 | 25 | 000000000 | 0000 |
No. 8 | ||||||||
| 1/2" | 0.322" | 0.096" | No. 4 | No. 29 | 15 | 50 | 000000000 | 00000 |
| 3/4" | 0.322" | 0.096" | No. 4 | No. 29 | 15 | 50 | 000000000 | 00000 |
| 1" | 0.322" | 0.096" | No. 4 | No. 29 | 15 | 50 | 000000000 | 00000 |
| 1 1/4" | 0.322" | 0.096" | No. 4 | No. 29 | 15 | 25 | 000000000 | 0000 |
| 1 1/2" | 0.322" | 0.096" | No. 4 | No. 29 | 15 | 25 | 000000000 | 00000 |
No. 10 | ||||||||
| 1/2" | 0.373" | 0.11" | No. 5 | No. 21 | 12 | 50 | 000000000 | 00000 |
| 3/4" | 0.373" | 0.11" | No. 5 | No. 21 | 12 | 25 | 000000000 | 0000 |
| 1" | 0.373" | 0.11" | No. 5 | No. 21 | 12 | 25 | 000000000 | 0000 |