McMaster-Carr logo
    Filter by
    System of Measurement
    Magnetic Properties
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Pin Finish
    Connecting Pins Included
    Movement
    Hook Wire Diameter
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    182 Products

    Nylon-Coated Eyebolts—For Lifting

    Route wire and cable through the smooth eye without snagging.
    Note: Capacities listed are for vertical lifting only. Eyebolts with shoulder can be used for angular lifting up to 45°, but the capacities will be significantly reduced. For angular lifting, we recommend Hoist Rings. Eyebolts without shoulder are for vertical lifting only.
    Warning: Never use to lift people or items over people.
    Nylon-Coated Steel
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Nylon-Coated Eyebolts—For Lifting, Closed Eye, With Shoulder.
    Image of Product. Front orientation. Contains Annotated. Eyebolts. Nylon-Coated Eyebolts—For Lifting, Closed Eye, Without Shoulder.

    Closed Eye

    With Shoulder

    Closed Eye,

    Without

    Shoulder

    Closed Eye—Closed eyes are stronger than bent-closed eyes.
    Thread
    With Shoulder
    Without Shoulder
    Size
    Lg.
    Shank
    Lg.
    Eye
    Dia.
    Vert. Cap.,
    lb.
    Threading
    Temp. Range,
    ° F
    Overall
    Lg.
    Each
    Overall
    Lg.
    Each
    Closed Eye
    1/4"-20
    		1"1"3/4"500Fully Threaded30 to 2752 3/8"7691T21000002 1/4"7691T3200000
    5/16"-18
    		1 1/8"1 1/8"7/8"900Fully Threaded30 to 2752 3/4"7691T2200002 5/8"7691T330000
    3/8"-16
    		1 1/4"1 1/4"1"1,400Fully Threaded30 to 2753 1/4"7691T2300002 7/8"7691T340000
    7/16"-14
    		1 3/8"1 3/8"1 1/16"2,000Fully Threaded30 to 2753 5/8"7691T6700000————0
    1/2"-13
    		1 1/2"1 1/2"1 3/16"2,600Fully Threaded30 to 2754"7691T24000003 1/2"7691T3500000
    9/16"-12
    		1 5/8"1 5/8"1 1/4"3,200Fully Threaded30 to 2754 1/2"7691T5200000————0
    5/8"-11
    		1 3/4"1 3/4"1 3/8"4,000Fully Threaded30 to 2754 7/8"7691T25000004 1/4"7691T3600000
    3/4"-10
    		2"2"1 1/2"6,000Fully Threaded30 to 2755 1/4"7691T26000004 3/4"7691T3700000
    7/8"-9
    		2 1/4"2 1/4"1 11/16"7,000Fully Threaded30 to 2756"7691T6800000————0
    1"-8
    		2 1/2"2 1/2"1 13/16"9,000Fully Threaded30 to 2757"7691T5400000————0
    M6 × 1 mm12 mm12 mm19 mm450Fully Threaded30 to 27547 mm7691T5500000————0
    M8 × 1.25 mm12 mm12 mm25 mm450Fully Threaded30 to 27561 mm7691T5600000————0
    M10 × 1.5 mm20 mm20 mm28 mm1,625Fully Threaded30 to 27575 mm7691T5700000————0
    M12 × 1.75 mm24 mm24 mm30 mm2,250Fully Threaded30 to 27585 mm7691T5900000————0
    M12 × 1.75 mm76 mm76 mm30 mm2,250Fully Threaded30 to 275137 mm7691T5800000————0
    M14 × 2 mm28 mm28 mm35 mm3,500Fully Threaded30 to 275103 mm7691T6100000————0
    M16 × 2 mm32 mm32 mm35 mm3,500Fully Threaded30 to 275106 mm7691T6200000————0
    M18 × 2.5 mm36 mm36 mm38 mm4,700Fully Threaded30 to 275117 mm7691T6300000————0
    M20 × 2.5 mm40 mm40 mm43 mm6,275Fully Threaded30 to 275135 mm7691T6400000————0
    M24 × 3 mm48 mm48 mm46 mm8,450Fully Threaded30 to 275153 mm7691T6500000————0
    M30 × 3.5 mm60 mm60 mm55 mm14,075Fully Threaded30 to 275194 mm7691T6600000————0
     

    Connecting Pins for Quick-Install Hook-Style Lacing

    Insert a pin into the lacing and lock it in place by bending the ends at a 90° angle.
    Note: Connecting pins work with all leg and point styles for a given lace number.
    Conveyor Belt Lacing Pins
    Image of Product. Front orientation. Conveyor Belt Lacing Pins. Connecting Pins for Quick-Install Hook-Style Lacing.
    Nylon-Coated
    Steel
    Nylon-Coated 18-8
    Stainless Steel
    For Lacing No.
    Lg.
    Pin
    OD
    Magnetic
    Properties
    Pkg.
    Qty.
    Pkg.
    Pkg.
    1, 1LL, 1SP, 1XSP, 25, 25LL, 25LP, 36, 36LL, 36LLSP, 36SP, UCM36, UCM36LL, UCM36LLSP, UCM36SP, UX1, UX1SP12"0.065"Nonmagnetic126225K130000006225K23000000
    2, 2SP, 3, U3, U3-1, U3-212"0.093"Nonmagnetic126225K14000006225K2400000
    4, U412"0.109"Nonmagnetic126225K15000006225K2500000
    4 1/2, 5, U512"0.125"Nonmagnetic126225K16000006225K2600000
    6, 7, U6, U712"0.156"Nonmagnetic126225K18000006225K2800000
    Cut-to-Length Conveyor Belt Lacing Pins
    Image of Product. Front orientation. Conveyor Belt Lacing Pins. Connecting Pins for Quick-Install Hook-Style Lacing.
    Nylon-Coated Steel
    Nylon-Coated 18-8
    Stainless Steel
    Per Ft.
    Per Ft.
    For Lacing No.
    Pin
    OD
    Magnetic
    Properties
    Choose a Maximum Continuous Length, ft.
    1-99
    100-Up
    1-99
    100-Up
    1, 1LL, 1SP, 1XSP, 25, 25LL, 25LP, 36, 36LL, 36LLSP, 36SP, UCM36, UCM36LL, UCM36LLSP, UCM36SP, UX1, UX1SP0.065"Nonmagnetic8, 10, 20, 25, 50———006225K630000000000
    1, 1LL, 1SP, 1XSP, 25, 25LL, 25LP, 36, 36LL, 36LLSP, 36SP, UCM36, UCM36LL, UCM36LLSP, UCM36SP, UX1, UX1SP0.065"Nonmagnetic10, 20, 25, 30, 50, 1006225K530000000000———00
    2, 2SP, 3, U3, U3-1, U3-20.093"Nonmagnetic10, 12, 20, 25, 506225K5400000000———00
    2, 2SP, 3, U3, U3-1, U3-20.093"Nonmagnetic10, 20, 25, 50———006225K6400000000
    4, U40.109"Nonmagnetic1006225K55000000006225K6500000000
    4 1/2, 5, U50.125"Nonmagnetic1006225K56000000006225K6600000000
    6, 7, U6, U70.156"Nonmagnetic1006225K58000000006225K6800000000

    Bolt-On Conveyor Belt Lacing

    Image of Product. Front orientation. Conveyor Belt Lacing. Bolt-On Conveyor Belt Lacing.
    Image of Product. Side1 orientation. Contains Annotated, Border. Conveyor Belt Lacing. Bolt-On Conveyor Belt Lacing.
    Our heaviest duty lacing uses bolts and nuts to repair and extend thick belts. Installation tools (sold separately) are required for proper installation.
    316 Stainless Steel—Stainless steel lacing is more corrosion resistant than galvanized steel lacing.
    Lacing
    Templates
    For Belt
    Wd.
    For Belt Thk.
    For Min.
    Pulley Dia.
    Connecting
    Pins Included
    Pin Material
    Magnetic
    Properties
    Mounting Fasteners
    Included
    Each
    Each
    Galvanized Steel
    12"0.250" to 0.625"9"YesNylon-Coated SteelMagneticYes6143K180000006143K310000000
    18"0.250" to 0.625"9"YesNylon-Coated SteelMagneticYes6143K1000006143K21000000
    20"0.250" to 0.625"9"YesNylon-Coated SteelMagneticYes6143K20000006143K32000000
    24"0.250" to 0.625"9"YesNylon-Coated SteelMagneticYes6143K30000006143K23000000
    30"0.250" to 0.625"9"YesNylon-Coated SteelMagneticYes6143K50000006143K24000000
    36"0.250" to 0.625"9"YesNylon-Coated SteelMagneticYes6143K60000006143K25000000
    42"0.250" to 0.625"9"YesNylon-Coated SteelMagneticYes6143K70000006143K33000000
    48"0.250" to 0.625"9"YesNylon-Coated SteelMagneticYes6143K80000006143K34000000
    60"0.250" to 0.625"9"YesNylon-Coated SteelMagneticYes6143K110000006143K28000000
     
    316 Stainless Steel
    18"0.250" to 0.625"9"YesNylon-Coated 18-8 Stainless SteelNonmagneticYes6143K120000006143K21000000
    24"0.250" to 0.625"9"YesNylon-Coated 18-8 Stainless SteelNonmagneticYes6143K130000006143K23000000
    30"0.250" to 0.625"9"YesNylon-Coated 18-8 Stainless SteelNonmagneticYes6143K140000006143K24000000
    36"0.250" to 0.625"9"YesNylon-Coated 18-8 Stainless SteelNonmagneticYes6143K150000006143K25000000
    42"0.250" to 0.625"9"YesNylon-Coated 18-8 Stainless SteelNonmagneticYes6143K160000006143K33000000
    48"0.250" to 0.625"9"YesNylon-Coated 18-8 Stainless SteelNonmagneticYes6143K17000000006143K34000000
     

    Quick-Install Hook-Style Conveyor Belt Lacing

    Image of Product. Front orientation. Conveyor Belt Lacing. Quick-Install Hook-Style Conveyor Belt Lacing, Standard Cardboard Sheet Lacing.
    Image of Specification. Front orientation. ZoomedIn view. Standard Point Hook. Quick-Install Hook-Style Conveyor Belt Lacing.
    Image of Specification. Front orientation. ZoomedIn view. Long Leg Hook. Quick-Install Hook-Style Conveyor Belt Lacing.
    Image of Specification. Front orientation. ZoomedIn view. Extra-Short Point Hook. Quick-Install Hook-Style Conveyor Belt Lacing.
    Image of Specification. Front orientation. ZoomedIn view. Long Point Hook. Quick-Install Hook-Style Conveyor Belt Lacing.
    Image of Specification. Front orientation. ZoomedIn view. Short Point Hook. Quick-Install Hook-Style Conveyor Belt Lacing.

    Standard

    Cardboard

    Sheet Lacing

    Standard Point

    Hook

    Long Leg Hook

    Extra-Short

    Point Hook

    Long Point Hook

    Short Point

    Hook

    The hooks on this lacing are staggered for a strong, yet low-profile connection. Also known as clipper lacing, use a lacer to quickly clinch hooks into belts.
    Note: Two laces are required for each joint.
    Standard Cardboard Sheet Lacing—Standard cardboard sheet lacing is for use on flat and troughed conveyors.
    316 Stainless Steel and 430 Stainless Steel—Stainless steel lacing is more corrosion resistant than steel lacing.
    Long Leg Hook—Long-leg hooks hold more belt fibers than standard point hooks, which prevents the lacing from pulling out once installed.
    Hook
    For Belt
    Wd.
    For Belt Thk.
    Lacing
    No.
    Type
    Wire
    Dia.
    For Min.
    Pulley Dia.
    Connecting
    Pins Included
    Pin Material
    Magnetic
    Properties
    Pkg.
    Qty.
    Pkg.
    Standard Cardboard Sheet Lacing
     
    Galvanized Steel
    6"0.030" to 0.063"25Standard Point0.025"15/16"YesNylon-Coated SteelMagnetic486123K210000000
    6"0.030" to 0.063"25LLLong Leg (LL)0.025"2"YesNylon-Coated SteelMagnetic246123K2300000
    6"0.063" to 0.093"1XSPExtra-Short Point (XSP)0.04"2"YesNylon-Coated SteelMagnetic246123K2400000
    6"0.063" to 0.125"25LPLong Point (LP)0.025"15/16"YesNylon-Coated SteelMagnetic486123K22000000
    6"0.093" to 0.125"1SPShort Point (SP)0.04"2"YesNylon-Coated SteelMagnetic246123K2500000
    6"0.125" to 0.156"1Standard Point0.04"2"YesNylon-Coated SteelMagnetic246123K1100000
    6"0.125" to 0.156"1LLLong Leg (LL)0.04"3"YesNylon-Coated SteelMagnetic246123K2600000
    12"0.030" to 0.063"25Standard Point0.025"15/16"YesNylon-Coated SteelMagnetic126123K1800000
    12"0.125" to 0.156"1Standard Point0.04"2"YesNylon-Coated SteelMagnetic126123K5700000
    12"0.125" to 0.156"2SPShort Point (SP)0.054"2"YesNylon-Coated SteelMagnetic126123K6700000
    12"0.156" to 0.187"2Standard Point0.054"2"YesNylon-Coated SteelMagnetic126123K1200000
    12"0.187" to 0.219"3Standard Point0.054"3"YesNylon-Coated SteelMagnetic126123K1300000
    12"0.219" to 0.250"4Standard Point0.054"4"YesNylon-Coated SteelMagnetic126123K1400000
    12"0.250" to 0.281"4 1/2Standard Point0.054"4"YesNylon-Coated SteelMagnetic126123K1500000
    12"0.281" to 0.313"5Standard Point0.054"5"YesNylon-Coated SteelMagnetic126123K1600000
    12"0.313" to 0.343"6Standard Point0.054"6"YesNylon-Coated SteelMagnetic126123K1700000
    12"0.343" to 0.390"7Standard Point0.054"7"YesNylon-Coated SteelMagnetic126123K6100000
     
    316 Stainless Steel
    6"0.030" to 0.063"25Standard Point0.025"15/16"YesNylon-Coated 18-8 Stainless SteelNonmagnetic486123K31000000
    6"0.030" to 0.063"25LLLong Leg (LL)0.025"2"YesNylon-Coated 18-8 Stainless SteelNonmagnetic246123K33000000
    6"0.063" to 0.125"25LPLong Point (LP)0.025"15/16"YesNylon-Coated 18-8 Stainless SteelNonmagnetic486123K32000000
    12"0.030" to 0.063"25Standard Point0.025"15/16"YesNylon-Coated 18-8 Stainless SteelNonmagnetic126123K1900000
     
    430 Stainless Steel
    6"0.063" to 0.093"1XSPExtra-Short Point (XSP)0.04"2"YesNylon-Coated 18-8 Stainless SteelMagnetic246123K3400000
    6"0.093" to 0.125"1SPShort Point (SP)0.04"2"YesNylon-Coated 18-8 Stainless SteelMagnetic246123K3500000
    6"0.125" to 0.156"1Standard Point0.04"2"YesNylon-Coated 18-8 Stainless SteelMagnetic246123K5900000
    6"0.125" to 0.156"1LLLong Leg (LL)0.04"3"YesNylon-Coated 18-8 Stainless SteelMagnetic246123K3600000
    12"0.125" to 0.156"1Standard Point0.04"2"YesNylon-Coated 18-8 Stainless SteelMagnetic126123K5800000
    12"0.125" to 0.156"2SPShort Point (SP)0.054"2"YesNylon-Coated 18-8 Stainless SteelMagnetic126123K4200000
    12"0.156" to 0.187"2Standard Point0.054"2"YesNylon-Coated 18-8 Stainless SteelMagnetic126123K5100000
    12"0.187" to 0.219"3Standard Point0.054"3"YesNylon-Coated 18-8 Stainless SteelMagnetic126123K52000000
    12"0.219" to 0.250"4Standard Point0.054"4"YesNylon-Coated 18-8 Stainless SteelMagnetic126123K53000000
    12"0.250" to 0.281"4 1/2Standard Point0.054"4"YesNylon-Coated 18-8 Stainless SteelMagnetic126123K54000000
    12"0.281" to 0.313"5Standard Point0.054"5"YesNylon-Coated 18-8 Stainless SteelMagnetic126123K55000000
    12"0.313" to 0.343"6Standard Point0.054"6"YesNylon-Coated 18-8 Stainless SteelMagnetic126123K56000000
    12"0.343" to 0.390"7Standard Point0.054"7"YesNylon-Coated 18-8 Stainless SteelMagnetic126123K62000000
     
    Accessories for Conveyor Belt Lacing
    Pins
    Nylon-Coated
    Steel
    Nylon-Coated 18-8
    Stainless Steel
    For Lacing No.
    Lg.
    Pin
    OD
    Magnetic
    Properties
    Pkg.
    Qty.
    Pkg.
    Pkg.
    25, 36, 1, UX1, UCM36, 1LL, 1SP, 1XSP, 25LL, 25LP, 36LL, 36LLSP, 36SP, UCM36LL, UCM36LLSP, UCM36SP, UX1SP12"0.065"Nonmagnetic126225K130000006225K23000000
    2, 3, U3-1, U3-2, U3, 2SP12"0.093"Nonmagnetic126225K14000006225K2400000
    4, U412"0.109"Nonmagnetic126225K15000006225K2500000
    4 1/2, 5, U512"0.125"Nonmagnetic126225K16000006225K2600000
    6, 7, U6, U712"0.156"Nonmagnetic126225K18000006225K2800000
    Cut-to-Length Pins
    Nylon-Coated Steel
    Nylon-Coated 18-8
    Stainless Steel
    Per Ft.
    Per Ft.
    For Lacing No.
    Pin
    OD
    Magnetic
    Properties
    Choose a Maximum Continuous Length, ft.
    1-99
    100-Up
    1-99
    100-Up
    25, 36, 1, UX1, UCM36, 1LL, 1SP, 1XSP, 25LL, 25LP, 36LL, 36LLSP, 36SP, UCM36LL, UCM36LLSP, UCM36SP, UX1SP0.065"Nonmagnetic10, 20, 25, 30, 50, 1006225K530000000000———00
    2, 3, U3-1, U3-2, U3, 2SP0.093"Nonmagnetic10, 12, 20, 25, 506225K5400000000———00
    2, 3, U3-1, U3-2, U3, 2SP0.093"Nonmagnetic10, 20, 25, 50———006225K640000000000
    4, U40.109"Nonmagnetic1006225K55000000006225K6500000000
    4 1/2, 5, U50.125"Nonmagnetic1006225K56000000006225K6600000000
    6, 7, U6, U70.156"Nonmagnetic1006225K58000000006225K6800000000

    Staple-Style Conveyor Belt Lacing

    Image of Product. Front orientation. Conveyor Belt Lacing. Staple-Style Conveyor Belt Lacing.
    Also known as alligator lacing, this strong, impact-resistant lacing uses a staple driver and installation guide to secure staples.
    316 Stainless Steel—Stainless steel lacing is more corrosion resistant than steel lacing.
    For Belt
    Wd.
    For Belt Thk.
    For Min.
    Pulley Dia.
    Connecting
    Pins Included
    Pin Material
    Magnetic
    Properties
    Pkg.
    Qty.
    Pkg.
    Steel
     
    Number 62 Lacing
    12"0.063" to 0.125"2"YesNylon-Coated SteelMagnetic46016K2110000000
    16"0.063" to 0.125"2"YesNylon-Coated SteelMagnetic46016K212000000
    18"0.063" to 0.125"2"YesNylon-Coated SteelMagnetic46016K213000000
    20"0.063" to 0.125"2"YesNylon-Coated SteelMagnetic46016K214000000
    24"0.063" to 0.125"2"YesNylon-Coated SteelMagnetic46016K215000000
    30"0.063" to 0.125"2"YesNylon-Coated SteelMagnetic46016K216000000
    36"0.063" to 0.125"2"YesNylon-Coated SteelMagnetic46016K217000000
    42"0.063" to 0.125"2"YesNylon-Coated SteelMagnetic46016K218000000
    48"0.063" to 0.125"2"YesNylon-Coated SteelMagnetic46016K219000000
    60"0.063" to 0.125"2"YesNylon-Coated SteelMagnetic46016K221000000
     
    Number 125 Lacing
    4"0.125" to 0.188"3"YesNylon-Coated SteelMagnetic106016K25100000
    10"0.125" to 0.188"3"YesNylon-Coated SteelMagnetic46016K28100000
    12"0.125" to 0.188"3"YesNylon-Coated SteelMagnetic46016K252000000
    14"0.125" to 0.188"3"YesNylon-Coated SteelMagnetic46016K282000000
    16"0.125" to 0.188"3"YesNylon-Coated SteelMagnetic46016K283000000
    18"0.125" to 0.188"3"YesNylon-Coated SteelMagnetic46016K254000000
    20"0.125" to 0.188"3"YesNylon-Coated SteelMagnetic46016K284000000
    24"0.125" to 0.188"3"YesNylon-Coated SteelMagnetic46016K256000000
    30"0.125" to 0.188"3"YesNylon-Coated SteelMagnetic46016K257000000
    36"0.125" to 0.188"3"YesNylon-Coated SteelMagnetic46016K258000000
    42"0.125" to 0.188"3"YesNylon-Coated SteelMagnetic46016K285000000
    48"0.125" to 0.188"3"YesNylon-Coated SteelMagnetic46016K286000000
    60"0.125" to 0.188"3"YesNylon-Coated SteelMagnetic46016K263000000
     
    Number 187 Lacing
    4"0.188" to 0.250"4"YesNylon-Coated SteelMagnetic106016K231000000
    12"0.188" to 0.250"4"YesNylon-Coated SteelMagnetic46016K232000000
    16"0.188" to 0.250"4"YesNylon-Coated SteelMagnetic46016K233000000
    18"0.188" to 0.250"4"YesNylon-Coated SteelMagnetic46016K234000000
    20"0.188" to 0.250"4"YesNylon-Coated SteelMagnetic46016K235000000
    24"0.188" to 0.250"4"YesNylon-Coated SteelMagnetic46016K236000000
    30"0.188" to 0.250"4"YesNylon-Coated SteelMagnetic46016K237000000
    36"0.188" to 0.250"4"YesNylon-Coated SteelMagnetic46016K238000000
    42"0.188" to 0.250"4"YesNylon-Coated SteelMagnetic46016K239000000
    48"0.188" to 0.250"4"YesNylon-Coated SteelMagnetic46016K241000000
    60"0.188" to 0.250"4"YesNylon-Coated SteelMagnetic46016K243000000
     
    316 Stainless Steel
     
    Number 62 Lacing
    12"0.063" to 0.125"2"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K222000000
    18"0.063" to 0.125"2"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K223000000
    24"0.063" to 0.125"2"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K224000000
    30"0.063" to 0.125"2"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K225000000
    36"0.063" to 0.125"2"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K226000000
    48"0.063" to 0.125"2"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K227000000
    60"0.063" to 0.125"2"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K228000000
     
    Number 125 Lacing
    10"0.125" to 0.188"3"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K287000000
    12"0.125" to 0.188"3"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K288000000
    14"0.125" to 0.188"3"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K289000000
    16"0.125" to 0.188"3"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K291000000
    18"0.125" to 0.188"3"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K292000000
    20"0.125" to 0.188"3"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K293000000
    24"0.125" to 0.188"3"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K294000000
    30"0.125" to 0.188"3"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K295000000
    36"0.125" to 0.188"3"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K296000000
    42"0.125" to 0.188"3"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K297000000
    48"0.125" to 0.188"3"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K298000000
    60"0.125" to 0.188"3"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K29900000000
     
    Number 187 Lacing
    12"0.188" to 0.250"4"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K244000000
    16"0.188" to 0.250"4"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K245000000
    18"0.188" to 0.250"4"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K246000000
    20"0.188" to 0.250"4"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K247000000
    24"0.188" to 0.250"4"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K248000000
    30"0.188" to 0.250"4"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K249000000
    36"0.188" to 0.250"4"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K261000000
    48"0.188" to 0.250"4"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K26400000000
    60"0.188" to 0.250"4"YesNylon-Coated 18-8 Stainless SteelNonmagnetic46016K26500000000
     
    Accessories and Replacements for Conveyor Belt Lacing
    Pins
    Image of Product. Front orientation. Conveyor Belt Lacing Pins. Staple-Style Conveyor Belt Lacing.
    10 ft. Long
    100 ft. Long
    For Lacing
    No.
    Magnetic
    Properties
    Each
    Each
    Nylon-Coated Steel
    62Magnetic6016K8110000006016K8130000000
    125Magnetic6016K815000006016K817000000
    187Magnetic6016K819000006016K822000000
     
    Nylon-Coated 18-8 Stainless Steel
    62Nonmagnetic6016K812000006016K814000000
    125Nonmagnetic6016K816000006016K818000000
    187Nonmagnetic6016K8210000006016K823000000
     
    Replacement Washers
    Image of Product. Front orientation. Washers. Staple-Style Conveyor Belt Lacing.
    For Lacing
    No.
    Pkg.
    Qty.
    Pkg.
    62506016K825000000
    125506016K82600000
    187506016K82700000
    back to top