Because they’re about 10% wider and taller than standard hex nuts, these heavy hex nuts distribute the load over a large area. Grade 2H nuts are comparable in strength to Grade 9 bolts. They're about 20% stronger than high-strength steel nuts and are used in heavy machinery, such as earth-moving equipment.

Blue PTFE-coated steel nuts have a slippery surface to resist sticking during installation. They're resistant to chemicals and salt water.

For technical drawings and 3-D models, click on a part number.

These nuts have excellent chemical resistance and can be used in saltwater environments. They're able to maintain their strength in high-pressure and high-temperature environments and are used with ASTM A193 bolts to fasten pressure tanks, valves, and flanges. Considered heavy hex nuts, they are about 10% wider and taller than standard hex nuts and distribute the load over a large area. Nuts may be mildly magnetic.

For technical drawings and 3-D models, click on a part number.

A nylon insert grips the bolt to resist loosening without damaging threads. These nuts are reusable, but their holding power lessens with each use. Made from Grade 8 steel, they're about 25% stronger than medium-strength steel locknuts.

Steel locknuts without a finish are ready to be painted or finished.

Black-oxide steel locknuts have a dark surface color and are mildly corrosion resistant in dry environments.

Zinc yellow-chromate plated steel locknuts resist corrosion in wet environments.

For technical drawings and 3-D models, click on a part number.

Grade B7, these threaded rods have a tensile strength about one and a half times stronger than low-strength steel rods. They meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.

For technical drawings and 3-D models, click on a part number.