Filter by
Thread Size
Thread Spacing
DFARS Compliance
Thread Direction
Thread Fit
Thread Type
Drive Style
Fastener Head Type
About Set Screws
More
Ultra-Fine-Thread Ball-Point Set Screws
Fine threads give you precise control. Made from 303 stainless steel, these set screws have good corrosion resistance. To install screws in unthreaded holes, use an optional threaded insert (sold separately). Length listed is the overall length.
For technical drawings and 3-D models, click on a part number.
303 Stainless Steel Set Screws
Tip | ||||||
|---|---|---|---|---|---|---|
| Lg. | Dia. | Material | Drive Size | Hardness | Each | |
1/4"-100  | ||||||
| 3/8" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 000000 |
| 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 1 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 2 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3 1/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3 1/2" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 3 3/4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
| 4" | 0.156" | Alloy Steel | 3/32" | Not Rated | 000000000 | 00000 |
Ultra-Fine-Threaded Inserts for Plastic
Threaded Inserts
Use these inserts to install fine-threaded screws in existing holes. Made from brass, they’re corrosion resistant, electrically conductive, and nonmagnetic. Press them into a drilled hole.
For technical drawings and 3-D models, click on a part number.
Inch