We will reply to your message within an hour.
Used to mount panels, signs, and dispensers, this foam tape absorbs shock and provides high strength holding power on rigid surfaces.
The most conformable foam tape we offer, use this tape for mounting, gasketing, and damping sound and vibration. It has adhesive on both sides.
Remove mounted objects from most surfaces without leaving residue behind.
Often used to install carpet, padding, and linoleum.
Use this tape for light duty mounting, as well as to splice paper, foil, film, and fabric.
The clear side of this polyester tape is coated with silicone adhesive for mounting to silicone rubber, while the white side is coated with acrylic adhesive for a strong bond to metal and plastic.
This flexible, multipurpose tape offers water resistance with excellent adhesion.
Also known as gaffer's tape, this conformable cloth tape leaves no residue when removed. The matte finish won't reflect light. Choose a color that will blend in for temporary repairs.
This tape has a high-tack adhesive that bonds quickly to rough surfaces such as wood, plaster, stucco, brick, metal, and cement.
Seal and mask rough surfaces such as concrete and stucco with this tape. The adhesive removes cleanly, even after long-term exposure to moisture and UV light.
This general purpose tape is suitable for most packaging applications.
This tape forms a stronger bond than our other packaging tape.
An economical alternative to our standard packaging tape.
For use in clean rooms, this tape won't leave residue behind.
The strong backing on this kraft paper tape resists moisture and weathering, yet it can still be torn by hand.
Seal boxes with rough or challenging surfaces, such as corrugated and printed cardboard.
For refrigerated packing and shipping, this tape sticks even when applied in cold and damp environments.
Bond the shorter, softer fibers of recycled cardboard with the specially formulated adhesive on this tape.
Twice as strong as our standard reinforced strapping tape for extra-heavy loads. Fiberglass fibers run along the length.
Use this tape for light duty bundling and strapping. Fiberglass fibers run along the length.
For added reinforcement, fiberglass fibers run the length and width of this strapping tape. It forms stronger bonds than our other reinforced tape.
Tri-directional fiberglass strands provide extra strength.
When exposed to moisture, this resin-coated fiberglass tape becomes rock-hard in about 30 minutes. Use it for rigid, waterproof repairs.
This tape has a high-bond adhesive that won't leave residue behind so it meets clean room requirements.
Often used to repair vinyl facings, this tape can be used on water heater blankets and fiberglass insulation joints.
Carbon fibers woven together form a graphite cloth tape for reinforcing joints and repairing cracks on graphite.
With excellent resistance to solvents, this tape is often used as blocking tape on silk screen frames.
Patch and seal roofs, window frames, gutters, and vents with this conformable tape.
Use this tape for a watertight bond on gutters, roofing membranes, and other building materials.
This tough, abrasion-resistant tape sticks to itself, so you can layer it over joints and seams to create an extra-strong bond. The thick adhesive conforms to fasteners and gaps to keep water out, even in extreme conditions.
Use this flame-retardant tape for sealing in galleys and other harsh, wet environments.
Seal foil-jacketed insulation as well as air-conditioning and refrigeration systems with this conformable aluminum tape.
Reinforced with fiberglass, this tape is flexible yet resists tearing. Use it for sealing and patching insulation and duct.
Seal fiberglass duct and insulation that's faced with an all-service jacket (ASJ). Tape is reinforced with fiberglass.
For easy identification, this tape is printed with flexible duct standard UL 181A-P or UL 181B-FX.
Only 0.0019" thick, so spliced film and paper easily pass through machinery without breaking.
Use this crepe paper tape for sharp paint lines.
This crepe paper tape keeps its hold, even on 300° F surfaces.
Only one edge of this kraft paper tape has adhesive. Apply the sticky side along edges and molding, and the other edge sticks out to catch drips.
Cover holes, fastener heads, and small areas with these shapes.
Aluminum foil is laminated to a tough fiberglass cloth to form a high-strength, reflective tape that resists temperatures up to 500° F. Use it for flame-spray masking and wire harness heat shielding.
Protect screen-printed graphics during high-temperature laminating and molding.
At half the thickness of our other masking tape for electronics, this polyimide tape conforms easily to components.
This vinyl tape meets clean room requirements and won't leave residue behind. It comes sealed in a plastic bag.
Protect impact-prone surfaces from scratches, chips, and abrasion with this thick, conformable tape.
Protect labels from moisture, oil, solvents, alkalies, and most acids.
In addition to resisting harsh chemicals, this tape withstands moisture, abrasion, and repeated impact.
Outline and draw attention to safety zones and hazards with this tape.
Made to the highest standards for cleanliness, this tape meets clean room requirements. It releases minimal contaminants, leaves no residue behind, and comes sealed in a plastic bag. Use it to mark hazardous items or areas.
Made from stainless steel, this noncorrosive, nonstaining, and nonmagnetic tape bonds to metal. Patch scratched coatings and finishes to prevent corrosion in marine, food-processing, and nuclear applications.
Reduce rattles and squeaks between parts with this abrasionresistant flocked tape. The acrylic adhesive sticks even on hard-to-bond plastics.
Quiet squeaky floor joists and reduce vibration with this foam tape.
In the event of a fire, this rubber tape expands to protect cables from flames and heat.
Use this tape to modify printed circuit boards, shield components, and prototype wiring-board layout and design.
The adhesive on this conformable aluminum foil tape is electrically conductive for use on surfaces that can't be soldered. Use it to shield cables and electronic components from EMI (electromagnetic interference).
A coating on this polyimide tape minimizes ESD (electrostatic discharge) when unwound from the roll and also during removal.
Our most slippery tape, the slick surface allows items to glide smoothly over it.
This tape provides a slick surface along with excellent resistance to electrical current.
Cover chutes, packaging lines, and slides with this tape for a slippery, nonstick surface that resists abrasion and impact.
Add a slippery surface to difficult-to-bond surfaces, such as plastic, foam, and powder-coated metal.
Use this slippery PTFE-coated tape for a smooth release on heat sealers and molds.
Fiberglass is laminated with Teflon® PTFE for a slippery, durable tape with excellent chemical and temperature resistance. Use it as a release surface on heat sealers and blister forming equipment.
This tape discharges minor amounts of surface static electricity and resists static buildup.
Highly resistant to impact, tearing, and corrosive chemicals, use FEP tape to line chutes and hoppers and to cover shelves in laboratories.
Often referred to as Rulon and bearing tape, this self-lubricating PTFE tape provides better abrasion and wear resistance than our standard slippery PTFE tape.
To protect sensitive equipment from static buildup, these tape dispensers have a conductive housing and nonskid base that grounds electrical charges by letting them pass through.
The metal construction stands up to heavy use.
These dispensers fit right in your hand for greater control than dispensers with a handle.
Twist your bag and insert into the dispenser to seal bagged parts. Use the trimmer blade on bag ends for a consistent result.
Make your markings stand out with this fluorescent tape.
Apply this glue like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape.
Mushroom-shaped heads interlock for a secure hold when two pieces are pressed together.
Create custom-length ties from a roll with hook on one side and loop on the other.
Able to fit small bundles, these thin ties are more flexible than other ties.
Level dies, plates, presses, and other machine tools—this shim tape conforms to curves and uneven surfaces.