McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    77 Products
    About Leveling Mounts
    industrial info icon

    Choose the right leveling mounts for your floor conditions, equipment weight, and vibration-control needs.

    Swivel Leveling Mounts with Threaded Stud

    Image of Product. Without Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Stud, Without Cushion.

    Without Cushion

    Image of Product. With Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Stud, With Cushion.

    With Cushion

    Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.
    Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.
    Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
    Black-Oxide Steel Base—With a matte black appearance, these mounts create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.
    Delrin® Acetal Base—These mounts are economical yet resistant to grease, oil, and chemicals that pool on the floor. Often used on small, lightweight machines, they have about 25% the capacity of similarly sized metal mounts.
    Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.
    Without Cushion
    With Rubber Cushion
    Thread
    Size
    Thread
    Lg.
    Swivel Range
    of Motion
    Base
    Dia.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Each
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Cushion
    Material
    Each
    Nickel-Plated Steel Base and Stud
    1/2"-20
    		2"7.5°1 7/8"4,0003 1/8"6111K1530000003,0003 1/4"Natural Rubber
    		6111K184000000
     
    Zinc-Yellow-Chromate-Plated Steel Base and Stud
    1/2"-20
    		2"7.5°1 7/8"4,0003 1/8"6111K167000003,0003 1/4"Natural Rubber
    		6111K20300000
     
    Black-Oxide Steel Base and Zinc-Plated Steel Stud
    1/2"-20
    		2"7.5°1 7/8"4,0003 1/8"6111K228000003,0003 1/4"Natural Rubber
    		6111K52400000
     
    303 Stainless Steel Base and Stud
    1/2"-20
    		2"7.5°1 7/8"4,0003 1/8"6111K188000003,0003 1/4"Natural Rubber
    		5546N2400000
     
    316 Stainless Steel Base and Stud
    1/2"-20
    		2"7.5°1 7/8"4,0003 1/8"6111K126000003,0003 1/4"Natural Rubber
    		6709N6400000
     
    Delrin® Acetal Base and Zinc-Plated Steel Stud
    1/2"-20
    		2"7.5°1 7/8"6253 1/8"6111K424000006253 1/4"Natural Rubber
    		6111K47100000
     

    Swivel Leveling Mounts with Threaded Hole

    Image of Product. Without Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Hole, Without Cushion.
    Image of Product. With Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Hole, With Cushion.

    Without Cushion

    With Cushion

    Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.
    Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.
    Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
    Black-Oxide Steel Base—With a matte black appearance, these mounts create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.
    Delrin® Acetal Base—These mounts are economical yet resistant to grease, oil, and chemicals that pool on the floor. Often used on small, lightweight machines, they have about 25% the capacity of similarly sized metal mounts.
    Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.
    Without Cushion
    With Rubber Cushion
    Thread
    Size
    Thread
    Dp.
    Swivel Range
    of Motion
    Base
    Dia.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Each
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Cushion
    Material
    Each
    Nickel-Plated Steel Base
    1/2"-20
    		7/16"7.5°1 7/8"4,0001 1/8"6103K202000003,0001 1/4"Natural Rubber
    		6103K175000000
     
    Zinc-Yellow-Chromate-Plated Steel Base
    1/2"-20
    		7/16"7.5°1 7/8"4,0001 1/8"6103K20300003,0001 1/4"Natural Rubber
    		6103K18100000
     
    Black-Oxide Steel Base
    1/2"-20
    		7/16"7.5°1 7/8"4,0001 1/8"6103K134000003,0001 1/4"Natural Rubber
    		6103K33600000
     
    303 Stainless Steel Base
    1/2"-20
    		7/16"7.5°1 7/8"4,0001 1/8"6103K222000003,0001 1/4"Natural Rubber
    		5212N1900000
     
    316 Stainless Steel Base
    1/2"-20
    		7/16"7.5°1 7/8"4,0001 1/8"6103K15500000——————0
     
    Delrin® Acetal Base
    1/2"-20
    		7/16"7.5°1 7/8"6251 1/8"6103K116000006251 1/4"Natural Rubber
    		6103K10400000
     

    Stay-Put Swivel Leveling Mounts with Threaded Stud

    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Stud, Without Cushion.
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Stud, With Cushion.

    Without

    Cushion

    With

    Cushion

    Bolt down machines so they don’t creep across the floor or tip over. These mounts have punch-out holes for securing equipment that you don’t need to move. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
    Glass-Filled Nylon Base and Zinc-Plated Steel Stud—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.
    Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
    Mounting Holes
    Without Cushion
    With Rubber Cushion
    Thread
    Size
    Thread
    Lg.
    Swivel Range
    of Motion
    Base
    Dia.
    No.
    of
    Fasteners
    Included
    Dia.
    Ctr.-to-Ctr.
    Lg.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Each
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Cushion
    Material
    Each
    Glass-Filled Nylon Base and Zinc-Plated Steel Stud
    1/2"-20
    		2"7.5°2"2No1/4"1 5/16"3,8003 1/8"2531K312000003,2003 3/16"Neoprene
    		2531K324000000
     

    Easy-Install Vibration-Damping Rigid Leveling Mounts with Threaded Stud

    Image of Product. Front orientation. Leveling Mounts. Easy-Install Vibration-Damping Rigid Leveling Mounts with Threaded Stud, Style 2.

    Style 2

    A two-piece design requires less clearance to install than one-piece mounts. Install these mounts in threaded holes to level equipment on uneven floors. Use a locknut (not included) to install mounts in unthreaded through holes. A rubber cushion reduces vibration to protect components and extend your machine’s life.
    Aluminum Base—These mounts are lighter than stainless steel ones, reducing the overall weight of your machine. They withstand occasional exposure to moisture, but don't hold up in wet environments like stainless steel.
    Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.
    Style
    Thread
    Size
    Thread
    Lg.
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Base
    Wd.
    Overall
    Ht.
    Cushion
    Material
    Each
    Aluminum Base and Zinc-Plated Steel Stud with Rubber Cushion
    21/2"-20
    		1 1/2"5000.18"4"1 3/16"Buna-N
    		6424K21000000
    21/2"-20
    		1 1/2"1,0000.12"6"1 3/16"Buna-N
    		6424K1200000
    21/2"-20
    		1 1/2"1,8750.21"4"1 3/16"Buna-N
    		6424K2300000
    21/2"-20
    		1 1/2"2,5000.13"6"1 3/16"Buna-N
    		6424K1400000
     

    Easy-Install Vibration-Damping Swivel Leveling Mounts with Threaded Stud

    Image of Product. Front orientation. Leveling Mounts. Easy-Install Vibration-Damping Swivel Leveling Mounts with Threaded Stud, With Cushion.

    With Cushion

    A two-piece design requires less clearance to install than one-piece mounts. Raise your machine just enough to slide the base underneath, then insert the stud from above through a threaded or unthreaded hole. The stud rests in a divot in the base and swivels to keep equipment level on slightly sloped and pitted floors. Mounts also have a rubber cushion that reduces vibration to protect components and extend your machine’s life.
    Iron Base—These mounts are best for dry environments since moisture will cause them to rust.
    Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.
    With Rubber Cushion
    Thread
    Size
    Thread
    Lg.
    Swivel Range
    of Motion
    Base
    Dia.
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Overall
    Ht.
    Cushion
    Material
    Each
    Iron Base and Zinc-Plated Steel Stud
    1/2"-20
    		5 1/2"3.5°3 1/2"5000.04"6 5/8"Buna-N
    		6011K12000000
    1/2"-20
    		5 1/2"3.5°3 1/2"1,0000.04"6 5/8"Buna-N
    		6011K1300000
     

    Reinforced Threaded-Hole Bumpers

    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Hole Bumpers, Style 1.

    Style 1

    With a metal base plate for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers and noise reducers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.
    Multipurpose NeopreneAbout Multipurpose Neoprene
    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Hole Bumpers, Style 1.

    Style 1

    A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Dp.
    OD
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Base Plate
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Style 1
    1/2"-20
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes9546K12000000
    1/2"-20
    		1/2"1 1/4"1 1/4"Durometer 75AHardBlack-40 to 200SteelNoYes9546K52200000
     
    Abrasion-Resistant Polyurethane RubberAbout Abrasion-Resistant Polyurethane Rubber
    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Hole Bumpers, Style 1.

    Style 1

    Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Dp.
    OD
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Base Plate
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Style 1
    1/2"-20
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftRed-40 to 200SteelNoYes9223K12000000
    1/2"-20
    		1/2"1 1/4"1 1/4"Durometer 60AMedium HardBlack-40 to 200SteelNoYes9546K44100000
    1/2"-20
    		1/2"1 1/4"1 1/4"Durometer 85AHardRed-40 to 200SteelNoYes9546K5400000
    1/2"-20
    		1/2"1 1/4"1 1/4"Durometer 95AExtra HardBlack-40 to 200SteelNoYes9546K45300000
     
    Oil-Resistant Buna-NAbout Oil-Resistant Buna-N
    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Hole Bumpers, Style 1.

    Style 1

    These bumpers resist oil and fuels better than other rubber bumpers. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Dp.
    OD
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Base Plate
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Style 1
    1/2"-20
    		1/2"1 1/4"1 1/4"Durometer 40AMedium SoftWhite-60 to 175SteelYesNo9546K463000000
     

    Threaded Locating and Support Buttons

    Image of Product. Front orientation. Contains Annotated. Locating and Support Buttons. Threaded Locating and Support Buttons.
    Image of Product. Flat Head. Front orientation. Contains Annotated. Locating and Support Buttons. Threaded Locating and Support Buttons.

    Flat Head

    Use these buttons to support and position workpieces and fixtures from the bottom or side. Threading makes these buttons easier to replace than press-fit, so they are a good choice for high-wear applications. They’re also known as rest buttons.
    Hex—Their hex shape lets you screw them into a threaded hole with a wrench or socket.
    Thread
    Lg.
    Wd.
    Size
    Lg.
    Lg. Tolerance
    Shape
    Each
    Steel with Flat Head
    1/2"5/8"1/2"-20
    		1/2"0.005" to 0.015"Hex8479A700000
    1/2"3/4"1/2"-20
    		9/16"0" to 0.015"Hex8479A680000
    3/4"5/8"1/2"-20
    		1/2"0.005" to 0.015"Hex8479A80000
    1"5/8"1/2"-20
    		1/2"0.005" to 0.015"Hex8479A90000
     

    Vibration-Damping Bolt-Down Mounts

    Image of Product. Style 1, Threaded-Insert Mount. Bottom orientation. Vibration-Damping Mounts. Vibration-Damping Bolt-Down Mounts, Threaded-Insert Mount, Style 1.

    Style 1,

    Threaded-Insert

    Mount

    These mounts reduce vibration and noise while anchoring machinery from below. Bolt them to the bases of fans, pumps, and generators so vibration from moving components doesn't wear out parts, crack floors, and push equipment out of place.
    Style 1—Threaded-Insert Mount
    Image of Product. Style 1, Threaded-Insert Mount. Bottom orientation. Vibration-Damping Mounts. Vibration-Damping Bolt-Down Mounts, Threaded-Insert Mount, Style 1.

    Style 1,

    Threaded-Insert

    Mount

    The most common choice, these mounts absorb enough shock and vibration for most machinery.
    Multipurpose Neoprene—Resist wear and tear well enough for most applications. They are UV resistant and won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.
    Base
    Mounting
    Each
    Thread
    Size
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Shear Cap.
    per Mount
    Deflection
    @ Shear Cap.
    Overall
    Ht.
    Dia.
    Lg.
    Wd.
    Temp. Range,
    ° F
    Fasteners
    Included
    No. of
    Holes
    Hole
    Dia.
    Hole
    Ctr.-to-Ctr.
    Base
    Material
    1-24
    25-99
    100-Up
     
    Multipurpose Neoprene
    1/2"-20
    		1300.12"Not RatedNot Rated1.12"1.83"3.75"2.25"10 to 180No20.34"3"Steel64875K25000000000000000000
    1/2"-20
    		2500.12"Not RatedNot Rated1.12"1.83"3.75"2.25"10 to 180No20.34"3"Steel64875K76000000000000000
    1/2"-20
    		3500.12"Not RatedNot Rated1.12"1.83"3.75"2.25"10 to 180No20.34"3"Steel64875K27000000000000000
    1/2"-20
    		4800.12"Not RatedNot Rated1.12"1.83"3.75"2.25"10 to 180No20.34"3"Steel64875K28000000000000000
     

    Hex-Head Gripper Screws

    Make quick height adjustments by turning the threaded stud. Screw these grippers into place from above and clamp against them. The serrations penetrate the workpiece surface to hold uneven or irregularly shaped parts.
    Hex with Threaded Stud
    Image of Attribute. Top orientation. Contains Annotated. Hex-Head Gripper Screws.
    Image of Attribute. Front orientation. Contains Annotated. Hex-Head Gripper Screws.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Extra-Fine Serrations.

    Extra-Fine

    Serrations

    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Fine Serrations.

    Fine Serrations

    Extra-Fine Serrations—Extra-fine serrations are closer together than fine serrations for less penetration and a lighter hold on the workpiece.
    Fine Serrations—Fine serrations penetrate the workpiece for aggressive holding.
    Fine Thread—Fine threads are closely spaced for more precise adjustments than coarse threads. They also resist loosening from vibration better than coarse threads.
    Thread
    Head
    Size
    Lg.
    Spacing
    Dia.
    Ht.
    Ht.
    Wd.
    Material
    Each
    Extra-Fine Serrations
    1/2"-20
    		1"Fine
    		5/8"1 23/64"23/64"3/4"Carbide-Tipped Steel8523A121000000
     
    Fine Serrations
    1/2"-20
    		1"Fine
    		5/8"1 23/64"23/64"3/4"Carbide-Tipped Steel8523A12500000
     

    Threaded Locating Pins

    Image of Product. Front orientation. Contains Annotated. Locating Pins. Threaded Locating Pins, Round Head.
    Image of Product. Front orientation. Contains Annotated, MultipleImages. Locating Pins. Threaded Locating Pins, Diamond Head.

    Round Head

    Diamond Head

    Screw the shank into a threaded hole for quick installation and removal. Mate these pins with holes in workpieces for precise alignment.
    Diamond Head—Diamond-head pins make less contact with the inside of a hole than round-head pins to reduce sticking and jamming.
    Head
    Thread
    Round Head
    Diamond Head
    Dia.
    (A)
    Ht.
    (B)
    Size
    Lg.
    Shoulder
    Ht.
    Overall
    Ht.
    Head Dia.
    Tolerance
    Hardness
    Each
    Each
    Steel
    1/2"11/16"1/2"-20
    		11/16"5/32"2 1/8"-0.0015" to -0.001"Rockwell C60 to Rockwell C641529N170000001529N27000000
    9/16"11/16"1/2"-20
    		21/32"5/32"2 1/8"-0.0015" to -0.001"Rockwell C60 to Rockwell C641529N41000001529N4400000
     

    Removable Drill Bushings for Thin Metal

    Image of Product. Front orientation. Contains Annotated. Drill Bushings. Removable Drill Bushings for Thin Metal.
    Unlike most bushings, these won’t buckle the material or distort the hole when installed in thin-gauge aluminum and steel fixture plates. They’re held in place by a lock ring (sold separately), so they’re easy to remove and reuse. Also known as jig bushings, they accurately guide drill bits, counterbores, reamers, and other cutting tools. Use them to make sure your drilled holes and cuts are consistent from part to part.
    Tolerance
    Thread
    ID
    OD
    Lg.
    For Drill
    Bit Size
    ID
    OD
    For Material
    Thk.
    Size
    Lg.
    Direction
    Material
    Hardness
    Each
    0.196"1/2"1/2"9 Ga.0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A626000000
    0.199"1/2"1/2"8 Ga.0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A62700000
    0.201"1/2"1/2"7 Ga.0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A62800000
    0.2031"1/2"1/2"13/64"0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A62900000
    0.213"1/2"1/2"3 Ga.0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A63100000
    0.2188"1/2"1/2"7/32"0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A1700000
    0.221"1/2"1/2"2 Ga.0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A63200000
    0.228"1/2"1/2"1 Ga.0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A63300000
    0.2344"1/2"1/2"15/64"0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A63400000
    0.25"1/2"1/2"1/4", E0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A1800000
    0.257"1/2"1/2"F0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A63500000
    0.261"1/2"1/2"G0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A63600000
    0.2656"1/2"1/2"17/64"0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A2100000
    0.266"1/2"1/2"H0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A63700000
    0.281"1/2"1/2"K0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A63800000
    0.2813"1/2"1/2"9/32"0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A2200000
    0.3125"1/2"1/2"5/16"0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A2300000
    0.315"1/2"1/2"8 mm0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A63900000
    0.316"1/2"1/2"O0.0001" to 0.0015"0.003" to 0.005"1/64" to 3/8"1/2"-20
    		1/4"Left Hand
    		1144 Carbon Steel
    		Rockwell C598509A64100000
    Drill Bushing Lock Rings
    Image of Product. Front orientation. Drill Bushing Lock Rings. Removable Drill Bushings for Thin Metal.
    For Bushing
    OD
    For Material
    Thk.
    OD
    Lg.
    Material
    Each
    1/2"1/64" to 1/8"9/16"3/8"Aluminum
    		8509A52400000
    1/2"1/64" to 1/8"5/8"3/8"Aluminum
    		8509A320000
    1/2"9/64" to 3/16"9/16"5/16"Aluminum
    		8509A5350000
    1/2"9/64" to 3/16"5/8"5/16"Aluminum
    		8509A5290000
    1/2"13/64" to 3/8"9/16"3/16"Aluminum
    		8509A5460000
    1/2"13/64" to 3/8"5/8"3/16"Aluminum
    		8509A5410000
    back to top