McMaster-Carr logo
    Filter by
    System of Measurement
    Mount Movement
    With Cushion
    Base Shape
    Hex Nut Material
    Thread Type
    Cushion Color
    Swivel Range of Motion
    Industrial Info Snippet
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    93 Products
    About Leveling Mounts
    industrial info icon

    Choose the right leveling mounts for your floor conditions, equipment weight, and vibration-control needs.

    Swivel Leveling Mounts with Threaded Stud

    Image of Product. Without Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Stud, Without Cushion.

    Without Cushion

    Image of Product. With Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Stud, With Cushion.

    With Cushion

    Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.
    Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.
    Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
    Black-Oxide Steel Base—With a matte black appearance, these mounts create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.
    Delrin® Acetal Base—These mounts are economical yet resistant to grease, oil, and chemicals that pool on the floor. Often used on small, lightweight machines, they have about 25% the capacity of similarly sized metal mounts.
    Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.
    Without Cushion
    With Rubber Cushion
    Thread
    Size
    Thread
    Lg.
    Swivel Range
    of Motion
    Base
    Dia.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Each
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Cushion
    Material
    Each
    Nickel-Plated Steel Base and Stud
    1"-8
    		3 1/2"7.5°4"20,0005 3/8"6111K6400000015,0005 1/2"Natural Rubber
    		6111K252000000
    1"-8
    		4 1/4"7.5°4"20,0006 1/8"6111K1560000015,0006 1/4"Natural Rubber
    		6111K67700000
    1"-8
    		6"7.5°4"20,0007 7/8"6111K650000015,0008"Natural Rubber
    		6111K25300000
    1"-8
    		8"7.5°4"20,0009 7/8"6111K660000015,00010"Natural Rubber
    		6111K25400000
     
    Zinc-Yellow-Chromate-Plated Steel Base and Stud
    1"-8
    		3 1/2"7.5°4"20,0005 3/8"6111K110000015,0005 1/2"Natural Rubber
    		6111K8800000
    1"-8
    		6"7.5°4"20,0007 7/8"6111K360000015,0008"Natural Rubber
    		6111K37600000
    1"-8
    		8"7.5°4"20,0009 7/8"6111K380000015,00010"Natural Rubber
    		6111K37800000
     
    Black-Oxide Steel Base and Zinc-Plated Steel Stud
    1"-8
    		3 1/2"7.5°4"20,0005 3/8"6111K2360000015,0005 1/2"Natural Rubber
    		6111K53400000
    1"-8
    		6"7.5°4"20,0007 7/8"6111K2380000015,0008"Natural Rubber
    		6111K53500000
    1"-8
    		8"7.5°4"20,0009 7/8"6111K2390000015,00010"Natural Rubber
    		6111K53600000
     
    303 Stainless Steel Base and Stud
    1"-8
    		3 1/2"7.5°4"20,0005 3/8"6111K290000015,0005 1/2"Natural Rubber
    		5546N34000000
    1"-8
    		4 1/4"7.5°4"—————015,0006 1/4"Natural Rubber
    		5546N35000000
    1"-8
    		4 1/2"7.5°4"20,0006 1/8"6111K19300000——————0
    1"-8
    		6"7.5°4"20,0007 7/8"6111K950000015,0008"Natural Rubber
    		5546N36000000
    1"-8
    		8"7.5°4"20,0009 7/8"6111K960000015,00010"Natural Rubber
    		5546N37000000
     
    316 Stainless Steel Base and Stud
    1"-8
    		3 1/2"7.5°4"20,0005 3/8"6111K13500000015,0005 1/2"Natural Rubber
    		6709N92000000
    1"-8
    		6"7.5°4"20,0007 7/8"6111K13700000015,0008"Natural Rubber
    		6709N95000000
    1"-8
    		8"7.5°4"20,0009 7/8"6111K13800000015,00010"Natural Rubber
    		6709N96000000
     
    Delrin® Acetal Base and Zinc-Plated Steel Stud
    1"-8
    		8"7.5°4"2,4009 7/8"6111K435000002,40010"Natural Rubber
    		6111K49200000
     

    Swivel Leveling Mounts with Threaded Hole

    Image of Product. Without Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Hole, Without Cushion.
    Image of Product. With Cushion. Front orientation. Leveling Mounts. Swivel Leveling Mounts with Threaded Hole, With Cushion.

    Without Cushion

    With Cushion

    Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.
    Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.
    Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
    Black-Oxide Steel Base—With a matte black appearance, these mounts create a finished look. They offer minimal corrosion resistance, so they're best for dry environments.
    303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.
    Delrin® Acetal Base—These mounts are economical yet resistant to grease, oil, and chemicals that pool on the floor. Often used on small, lightweight machines, they have about 25% the capacity of similarly sized metal mounts.
    Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.
    Without Cushion
    With Rubber Cushion
    Thread
    Size
    Thread
    Dp.
    Swivel Range
    of Motion
    Base
    Dia.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Each
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Cushion
    Material
    Each
    Nickel-Plated Steel Base
    1"-8
    		13/16"7.5°4"20,0001 7/8"6103K9300000015,0002"Natural Rubber
    		6103K234000000
     
    Zinc-Yellow-Chromate-Plated Steel Base
    1"-8
    		13/16"7.5°4"20,0001 7/8"6103K120000015,0002"Natural Rubber
    		6103K8800000
     
    Black-Oxide Steel Base
    1"-8
    		13/16"7.5°4"20,0001 7/8"6103K1390000015,0002"Natural Rubber
    		6103K34200000
     
    303 Stainless Steel Base
    1"-8
    		13/16"7.5°4"20,0001 7/8"6103K290000015,0002"Natural Rubber
    		5212N2500000
     
    316 Stainless Steel Base
    1"-8
    		13/16"7.5°4"20,0001 7/8"6103K16300000——————0
     
    Delrin® Acetal Base
    1"-8
    		13/16"7.5°4"2,4001 7/8"6103K73000002,4002"Natural Rubber
    		6103K5100000
     

    Stay-Put Swivel Leveling Mounts with Threaded Stud

    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Stud, Without Cushion.
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Stud, With Cushion.

    Without

    Cushion

    With

    Cushion

    Bolt down machines so they don’t creep across the floor or tip over. These mounts have punch-out holes for securing equipment that you don’t need to move. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
    Glass-Filled Nylon Base and Zinc-Plated Steel Stud—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.
    Glass-Filled Nylon Base and 303 Stainless Steel Stud—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, unlike 316 stainless steel mounts, they won't hold up to harsh chemical cleaning solutions.
    Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
    Mounting Holes
    Without Cushion
    With Rubber Cushion
    Thread
    Size
    Thread
    Lg.
    Swivel Range
    of Motion
    Base
    Dia.
    No.
    of
    Fasteners
    Included
    Dia.
    Ctr.-to-Ctr.
    Lg.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Each
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Cushion Material
    Each
    Glass-Filled Nylon Base and Zinc-Plated Steel Stud
    1"-8
    		6"7.5°5"2No1/2"3 7/8"10,0008 1/4"2531K1100000010,0008 9/16"Neoprene
    		2531K17000000
    1"-8
    		8"7.5°4 3/8"2No13/32"2 31/32"—————02,7009 11/16"Natural Rubber/SBR2531K30100000
     
    Glass-Filled Nylon Base and 303 Stainless Steel Stud
    1"-8
    		6"7.5°5"2No1/2"3 7/8"10,0008 1/4"2531K140000010,0008 9/16"Neoprene
    		2531K2100000
     

    Stay-Put Sanitary Swivel Leveling Mounts with Threaded Stud

    Image of Product. Front orientation. Leveling Mounts. Stay-Put Sanitary Swivel Leveling Mounts with Threaded Stud, With Cushion.

    With Cushion

    Free of crevices where bacteria can grow, these mounts have an extremely smooth finish, rounded edges, and a covered stud. A silicone seal at the base of the thread cover keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. You can also bolt them down so machines don’t creep across the floor or tip over. A ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
    304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
    Mounting Holes
    With Rubber Cushion
    Thread
    Size
    Thread
    Lg.
    Mounting Ht.
    Swivel Range
    of Motion
    Base
    Dia.
    No.
    of
    Fasteners
    Included
    Dia.
    Ctr.-to-Ctr.
    Lg.
    Food Industry Std.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Cushion
    Material
    Each
    304 Stainless Steel Base and Stud
    1"-8
    		2 7/8"4" to 5 3/8"9°4 1/16"2No1/2"3 1/8"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    		17,4006 7/8"Buna-N
    		6903N240000000
    1"-8
    		4 1/8"5 3/16" to 7 3/4"9°4 1/16"2No1/2"3 1/8"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    		17,4009 1/4"Buna-N
    		6903N25000000
     

    Sanitary Swivel Leveling Mounts with Threaded Stud

    Image of Product. Front orientation. Leveling Mounts. Sanitary Swivel Leveling Mounts with Threaded Stud, With Cushion.

    With

    Cushion

    With an extremely smooth finish, rounded edges, and a covered stud, these mounts are free of crevices where bacteria can grow. They have a silicone seal at the base of the thread cover that keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. They also have a rubber cushion that reduces vibration to extend your machine’s life. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
    With an extremely smooth finish, rounded edges, and a covered stud, these mounts are free of crevices where bacteria can grow. They have a silicone seal at the base of the thread cover that keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
    304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.
    With Rubber Cushion
    Thread
    Size
    Thread
    Lg.
    Mounting Ht.
    Swivel Range
    of Motion
    Base
    Dia.
    Food Industry Std.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Cushion
    Material
    Each
    304 Stainless Steel Base and Stud
    1"-8
    		3 3/8"4 3/8" to 5 3/4"10°4 15/16"3-A Certified 88-00, FDA Compliant 21 CFR 177.2600
    		7,1007 1/4"Buna-N
    		3356K330000000
     

    Vibration-Damping Swivel Leveling Mounts with Threaded Stud

    Image of Product. Front orientation. Leveling Mounts. Vibration-Damping Swivel Leveling Mounts with Threaded Stud, With Cushion.

    With Cushion

    A rubber cushion reduces vibration to protect components and extend your machine’s life. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.
    Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
    Plastic Cushion—The plastic bottom won't scratch or scuff floors when you’re moving equipment.
    Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.
    With Rubber Cushion
    With Plastic Cushion
    Thread
    Size
    Thread
    Lg.
    Swivel Range
    of Motion
    Base
    Dia.
    Overall
    Ht.
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Cushion
    Material
    Each
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Cushion Material
    Each
    Zinc-Yellow-Chromate-Plated Steel Base and Stud
    1"-8
    		3 1/2"7.5°4"6"4,5000.06"Neoprene
    		6330K3200000011,8000.08"Fiber-Reinforced Nylon6330K38000000
     

    Reinforced Threaded-Hole Bumpers

    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Hole Bumpers, Style 1.

    Style 1

    With a metal base plate for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers and noise reducers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.
    Multipurpose NeopreneAbout Multipurpose Neoprene
    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Hole Bumpers, Style 1.

    Style 1

    A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Dp.
    OD
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Base Plate
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Style 1
    1"-8
    		1"2 1/4"2 1/4"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes9546K75000000
    1"-8
    		1"2 1/4"2 1/4"Durometer 75AHardBlack-40 to 200SteelNoYes9546K52800000
    1"-8
    		1 1/4"3"2 3/4"Durometer 40AMedium SoftBlack-40 to 200SteelNoYes9546K2500000
    1"-8
    		1 1/4"3"2 3/4"Durometer 75AHardBlack-40 to 200SteelNoYes9546K52900000
     
    Abrasion-Resistant Polyurethane RubberAbout Abrasion-Resistant Polyurethane Rubber
    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Hole Bumpers, Style 1.

    Style 1

    Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Dp.
    OD
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Base Plate
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Style 1
    1"-8
    		1"2 1/4"2 1/4"Durometer 50AMediumRed-40 to 200SteelNoYes9223K146000000
    1"-8
    		1"2 1/4"2 1/4"Durometer 60AMedium HardBlack-40 to 200SteelNoYes9546K44800000
    1"-8
    		1"2 1/4"2 1/4"Durometer 85AHardRed-40 to 200SteelNoYes9546K8500000
    1"-8
    		1"2 1/4"2 1/4"Durometer 95AExtra HardBlack-40 to 200SteelNoYes9546K46100000
    1"-8
    		1 1/4"3"2 3/4"Durometer 60AMedium HardRed-40 to 200SteelNoYes9223K16400000
    1"-8
    		1 1/4"3"2 3/4"Durometer 85AHardRed-40 to 200SteelNoYes9546K5900000
    1"-8
    		1 1/4"3"2 3/4"Durometer 90AExtra HardRed-40 to 200SteelNoYes9223K16500000
     
    Oil-Resistant Buna-NAbout Oil-Resistant Buna-N
    Image of Product. Front orientation. Bumpers. Reinforced Threaded-Hole Bumpers, Style 1.

    Style 1

    These bumpers resist oil and fuels better than other rubber bumpers. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    Thread
    Size
    Dp.
    OD
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Base Plate
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    Style 1
    1"-8
    		1"2 1/4"2 1/4"Durometer 40AMedium SoftWhite-60 to 175SteelYesNo9546K469000000
     

    Stay-Put Swivel Leveling Mounts with Threaded Hole

    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Hole, Without Cushion.
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Hole, With Cushion.

    Without

    Cushion

    With Cushion

    Bolt down machines so they don’t creep across the floor or tip over. These mounts have punch-out holes for securing equipment that you don’t need to move. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.
    Glass-Filled Nylon Base and Zinc-Plated Steel Hex Nut—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.
    Glass-Filled Nylon Base and 303 Stainless Steel Hex Nut—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals.
    Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
    Mounting Holes
    Without Cushion
    With Rubber Cushion
    Thread
    Size
    Thread
    Dp.
    Cap. per
    Mount, lb.
    Swivel Range
    of Motion
    Base
    Dia.
    No.
    of
    Fasteners
    Included
    Dia.
    Ctr.-to-Ctr.
    Lg.
    Overall
    Ht.
    Each
    Overall
    Ht.
    Cushion
    Material
    Each
    Glass-Filled Nylon Base and Zinc-Plated Steel Hex Nut
    1"-8
    		13/16"7,5007.5°4"2No7/16"2 11/16"2 3/8"60985K1010000002 7/16"Neoprene
    		60985K102000000
    1"-8
    		13/16"10,0007.5°5"2No1/2"3 7/8"3"60985K64000003 5/16"Neoprene
    		60985K7500000
     
    Glass-Filled Nylon Base and 303 Stainless Steel Hex Nut
    1"-8
    		13/16"7,5007.5°4"2No7/16"2 11/16"2 3/8"60985K103000002 7/16"Neoprene
    		60985K10400000
    1"-8
    		13/16"10,0007.5°5"2No1/2"3 7/8"3"60985K69000003 5/16"Neoprene
    		60985K8100000
     

    Swivel Pads for Screws and Threaded Studs

    Image of Product. Front orientation. Swivel Pads. Swivel Pads for Screws and Threaded Studs.
    Image of Product. Bottom orientation. ZoomedIn view. Contains Border. Swivel Pads. Swivel Pads for Screws and Threaded Studs.
    Attach to the end of a screw or threaded stud to apply uniform pressure on uneven and angled surfaces. Also known as toggle and swivel-foot pads.
    Dia.
    Ht.
    Load Cap.,
    lb.
    Thread
    Size
    Range of
    Motion
    Tip Material
    Each
    Steel
    1 5/8"1 13/16"18,7501"-8
    		10°Steel8955A17000000
     
    Stainless Steel
    1 5/8"1 13/16"18,7501"-8
    		10°Stainless Steel
    		89585A700000
     

    Shock-Absorbing Swivel Leveling Mounts with Threaded Stud

    Absorb sudden impacts from heavy machinery, such as punch presses, die cutters, and generators that jolt as they power on. These mounts have a solid rubber base, similar to a hockey puck, that isolates shock to protect floors and equipment from damage. The base also cuts down on noise and grips the floor so equipment doesn't slide when it's vibrating. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
    Round Neoprene Base with Zinc-Plated Steel Stud
    Image of Product. Front orientation. Leveling Mounts. Shock-Absorbing Swivel Leveling Mounts with Threaded Stud, Round Base.
    Thread
    Size
    Thread
    Lg.
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Swivel Range
    of Motion
    Base
    Dia.
    Overall
    Ht.
    Each
    1"-8
    		4 1/4"3,7000.13"7.5°5"5 7/8"63965K880000000
    1"-8
    		4 1/4"8,0000.13"7.5°5"5 7/8"63965K89000000

    Stay-Put Swivel Leveling Mounts with Threaded Stud and Offset Hole

    One or more offset mounting holes extend from underneath machines to give you more room to drill and install fasteners. These mounts bolt down to secure equipment that doesn’t need to move and prevent it from creeping or tipping. A ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.
    Oval Base
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Stud and Offset Hole, Oval Base, 1 Mounting Hole, Without Cushion.
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Stud and Offset Hole, Oval Base, 1 Mounting Hole, With Cushion.

    1 Mounting

    Hole,

    Without

    Cushion

    1 Mounting

    Hole, With

    Cushion

    Glass-Filled Nylon Base and Zinc-Plated Steel Stud—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.
    Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
    Base
    Mounting
    Holes
    Without Cushion
    With Rubber Cushion
    Thread
    Size
    Thread
    Lg.
    Cap. per
    Mount, lb.
    Swivel Range
    of Motion
    Lg.
    Wd.
    Fasteners
    Included
    Dia.
    Overall
    Ht.
    Each
    Overall
    Ht.
    Cushion
    Material
    Each
    Glass-Filled Nylon Base and Zinc-Plated Steel Stud
     
    1 Mounting Hole
    1"-8
    		6"7,5007.5°5 7/16"4"No1/2"7 5/16"6144K220000007 1/2"Neoprene
    		6144K62000000
     
    Round Base
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Stud and Offset Hole, Round Base, 1 Mounting Hole, With Cushion.
    Image of Product. Front orientation. Leveling Mounts. Stay-Put Swivel Leveling Mounts with Threaded Stud and Offset Hole, Round Base, 2 Mounting Holes, With Cushion.

    1 Mounting Hole

    With Cushion

    2 Mounting Holes

    With Cushion

    304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.
    Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.
    Mounting Holes
    With Rubber Cushion
    Thread
    Size
    Thread
    Lg.
    Swivel Range
    of Motion
    Base
    Dia.
    Fasteners
    Included
    Dia.
    Ctr.-to-Ctr.
    Lg.
    Cap. per
    Mount, lb.
    Overall
    Ht.
    Cushion
    Material
    Each
    304 Stainless Steel Base and Stud
     
    1 Mounting Hole
    1"-8
    		4"5°2 15/16"No19/32"—2,6954 7/8"Buna-N
    		6221K314000000
     
    2 Mounting Holes
    1"-8
    		4"5°2 15/16"No19/32"4 1/8"2,6954 7/8"Buna-N
    		6221K31700000
     

    Vibration-Damping Swivel Leveling Mounts with Threaded Hole

    Image of Product. Front orientation. Leveling Mounts. Vibration-Damping Swivel Leveling Mounts with Threaded Hole, With Cushion.

    With Cushion

    A rubber cushion reduces vibration to protect components and extend your machine’s life. These mounts have a ball-and-socket joint in the base that swivels to compensate for slightly sloped and pitted floors. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.
    Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.
    Plastic Cushion—The plastic bottom won't scratch or scuff floors when you’re moving equipment.
    Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.
    With Rubber Cushion
    With Plastic Cushion
    Thread
    Size
    Thread
    Dp.
    Swivel Range
    of Motion
    Base
    Dia.
    Overall
    Ht.
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Cushion
    Material
    Each
    Cap. per
    Mount, lb.
    Deflection
    @ Cap.
    Cushion Material
    Each
    Zinc-Yellow-Chromate-Plated Steel Base
    1"-8
    		11/16"7.5°4"2 1/2"4,5000.06"Neoprene
    		6319K5200000011,8000.08"Fiber-Reinforced Nylon6319K58000000
     

    Nonmarring Swivel Pads for Screws and Threaded Studs

    Image of Product. Front orientation. Swivel Pads. Nonmarring Swivel Pads for Screws and Threaded Studs.
    Image of Product. Bottom orientation. ZoomedIn view. Contains Border. Swivel Pads. Nonmarring Swivel Pads for Screws and Threaded Studs.
    The contact area is covered in plastic to protect soft metal and polished surfaces. Attach these pads to the end of a screw or threaded stud to apply uniform pressure on uneven and angled surfaces. Also known as toggle and swivel-foot pads.
    Dia.
    Ht.
    Load Cap.,
    lb.
    Thread
    Size
    Range of
    Motion
    Tip
    Material
    Each
    Steel
    1 5/8"1 13/16"1,5701"-8
    		10°Acetal
    		84875A47000000
     
    Stainless Steel
    1 5/8"1 13/16"1,5701"-8
    		10°Acetal
    		89585A1500000
     

    Gripper Swivel Pads for Screws and Threaded Studs

    Image of Product. Front orientation. Swivel Pads. Gripper Swivel Pads for Screws and Threaded Studs.
    Image of Product. Bottom orientation. ZoomedIn view. Contains Border. Swivel Pads. Gripper Swivel Pads for Screws and Threaded Studs.
    Attach to the end of a screw or threaded stud—the serrated face swivels to grip uneven and angled surfaces. Also known as toggle and swivel-foot pads.
    Dia.
    Ht.
    Load Cap.,
    lb.
    Range of
    Motion
    Tip Material
    Mounting Hole
    Thread Size
    Each
    Steel
    1 5/8"1 13/16"18,75010°Steel1"-8
    		8955A27000000
     
    Stainless Steel
    1 5/8"1 13/16"24,20010°Stainless Steel
    		1"-8
    		89585A2700000
     

    Sanitary Threaded-Stem Casters

    Image of Product. Front orientation. Casters. Sanitary Threaded-Stem Casters.
    Image of Attribute. Front orientation. Contains Annotated. Casters. Sanitary Threaded-Stem Casters.
    Designed for sanitary environments such as food plants, use these casters to move machinery, carts, furniture, and other equipment while compensating for uneven floors. They have a hygienic thread cover that prevents contaminants from settling in the grooves. To further block out contaminants even as the caster moves, there is a silicone seal at each end of the thread cover, as well as another seal where the caster swivels. The frame of these casters has a smooth finish and rounded edges, so there are no crevices for bacteria to grow in, reducing the chance of foodborne illnesses. Made of 304 stainless steel, the frame withstands washdowns and chemicals used for cleaning.
    To comply with Hazard Analysis and Critical Control Point (HACCP) programs, all of the silicone seals have metal and chemical additives, so they can be picked up on metal detectors or X-ray machines. They’re also FDA compliant for direct contact with food.
    Level your equipment by adjusting the threaded stem. Rough surfaces and debris won’t damage the polyurethane wheel on these casters because it resists abrasions and absorbs shocks. Press once on the foot pedal to lock both the wheel and the swivel. When it’s not locked, swiveling is smooth thanks to the dual raceway swivel bearing.
    Wheel
    Swivel with
    Total Lock
    Dia.
    Wd.
    Mount Ht.
    Wt. Cap. per
    Caster, lb.
    Hardness
    Stem
    Lg.
    Adjustment
    Mechanism
    Swivel Bearing
    Construction
    Frame Material
    Features
    Certification
    Food Industry Std.
    Each
    1"-8 Stem Thread Size
     
    Nonmarking Blue Tread-on-Core Polyurethane Rubber Wheels—Hard
    3 15/16"1 5/16"8" to 9 7/16"330Durometer 60D5 7/8"NutDual Raceway304 Stainless SteelHygienic Thread CoverCE Marked
    		FDA Compliant 21 CFR 177.2600
    		3569N130000000
    3 15/16"1 5/16"9 3/16" to 11 13/16"330Durometer 60D8 1/4"NutDual Raceway304 Stainless SteelHygienic Thread CoverCE Marked
    		FDA Compliant 21 CFR 177.2600
    		3569N14000000
     
    back to top