M16 Feet | McMaster-Carr

Filter by

System of Measurement

Mount Movement

Overall Height

Thread Length

Base Diameter

Mount Type

Base Material

Base Shape

Stud Material

Thread Pitch

With Cushion

Capacity per Mount

10,000 lb. to 19,999 lb.

Height

Performance

Low Frequency Vibration Damping

Material

Thread Type

Hex Nut Material

Base Finish

Zinc Yellow-Chromate Plated

Leg Shape

Hex Nut Width

REACH

RoHS

Compliant with Exemptions

Not Compliant

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Forward

How can we improve?

98 Products

About Leveling Mounts

Choose the right leveling mounts for your floor conditions, equipment weight, and vibration-control needs.

Stay-Put Swivel Leveling Mounts with Threaded Stud


Without Cushion	With Cushion

Bolt down machines so they don’t creep across the floor or tip over. These mounts have punch-out holes for securing equipment that you don’t need to move. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Glass-Filled Nylon Base and Zinc-Plated Steel Stud—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.

Glass-Filled Nylon Base and 303 Stainless Steel Stud—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, unlike 316 stainless steel mounts, they won't hold up to harsh chemical cleaning solutions.

316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

					Mounting Holes				Without Cushion				With Rubber Cushion
	Thread Size	Thread Lg., mm	Swivel Range of Motion	Base Dia., mm	No. of	Fasteners Included	Dia., mm	Ctr.-to-Ctr. Lg., mm	Cap. per Mount, lb.	Overall Ht., mm		Each	Cap. per Mount, lb.	Overall Ht., mm	Cushion Material		Each
Glass-Filled Nylon Base and Zinc-Plated Steel Stud



		M16 × 2 mm	76	7.5°	51	2	No	6.4	33.8	4,000	105	6992K189	000000	—	—	—	———	0


		M16 × 2 mm	76	7.5°	76	2	No	8.9	55.9	5,000	104	6992K202	00000	5,000	105.6	Neoprene	6992K472	000000
		M16 × 2 mm	76	7.5°	102	2	No	11.9	68.8	6,000	109	6992K204	00000	6,000	110.6	Neoprene	6992K476	00000
		M16 × 2 mm	102	7.5°	76	2	No	8.9	55.9	5,000	130	6992K19	00000	5,000	131.6	Neoprene	6992K44	00000
		M16 × 2 mm	102	7.5°	102	2	No	11.9	68.8	6,000	135	6992K215	00000	6,000	136.6	Neoprene	6992K481	00000
		M16 × 2 mm	152	7.5°	51	2	No	6.4	33.8	4,000	181	6992K235	00000	4,000	182.6	Neoprene	6992K483	00000
		M16 × 2 mm	152	7.5°	76	2	No	8.9	55.9	5,000	181	6992K253	00000	5,000	182.6	Neoprene	6992K492	00000
		M16 × 2 mm	152	7.5°	102	2	No	11.9	68.8	6,000	185	6992K21	00000	6,000	186.6	Neoprene	6992K45	00000
		M16 × 2 mm	203	7.5°	76	2	No	8.9	55.9	5,000	232	6992K263	00000	5,000	233.6	Neoprene	6992K505	00000
		M16 × 2 mm	203	7.5°	102	2	No	11.9	68.8	6,000	236	6992K267	00000	6,000	237.6	Neoprene	6992K506	00000
		M16 × 2 mm	254	7.5°	127	2	No	12	98	10,000	311	6992K274	00000	10,000	312.6	Neoprene	6992K507	00000


		Glass-Filled Nylon Base and 303 Stainless Steel Stud



				M16 × 2 mm	102	7.5°	80	2	No	8.9	55.9	5,000	130	6992K72	00000	5,000	131.6	Neoprene	6992K91	00000


				M16 × 2 mm	152	7.5°	102	2	No	11.9	68.8	6,000	185	6992K73	00000	6,000	186.6	Neoprene	6992K92	00000
				M16 × 2 mm	203	7.5°	76	2	No	8.9	55.9	—	—	———	0	5,000	233.6	Neoprene	6992K615	00000
				M16 × 2 mm	254	7.5°	127	2	No	12.7	98.4	10,000	311	6992K614	00000	—	—	—	———	0


				316 Stainless Steel Base and Stud



						M16 × 2 mm	75	6°	50	2	No	8.5	38	3,100	92	2531K607	00000	—	—	—	———	0


						M16 × 2 mm	125	6°	50	2	No	8.5	38	3,100	142	2531K608	00000	—	—	—	———	0

Swivel Leveling Mounts with Threaded Stud

Without Cushion

With Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.

Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.

Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.

303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Lg., mm	Swivel Range of Motion	Base Dia., mm	Cap. per Mount, lb.	Overall Ht., mm		Each	Cap. per Mount, lb.	Overall Ht., mm	Cushion Material		Each
Nickel-Plated Steel Base and Stud



		M16 × 2 mm	51	7.5°	64	5,950	83	6111K655	000000	4,500	86	Natural Rubber	6111K666	000000


		Zinc-Yellow-Chromate-Plated Steel Base and Stud



				M16 × 2 mm	51	7.5°	64	5,940	83	6301K75	00000	4,500	86	Natural Rubber	6301K83	00000


				303 Stainless Steel Base and Stud



						M16 × 2 mm	51	7.5°	64	5,940	83	6301K91	00000	4,500	86	Natural Rubber	6301K115	00000


						316 Stainless Steel Base and Stud



								M16 × 2 mm	51	7.5°	64	5,940	83	6301K35	00000	—	—	—	———	0

Rigid Leveling Mounts with Threaded Stud

Style 1

Level equipment on uneven floors. Install these mounts in threaded holes to level equipment on uneven floors. Use a locknut (not included) to install mounts in unthreaded through holes.

Zinc-Plated Steel Base—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.

Plastic Cushion—The plastic bottom won't scratch or scuff floors when you’re moving equipment.

	Thread Size	Thread Lg., mm	Cap. per Mount, lb.	Base Dia., mm	Overall Ht., mm	Cushion Material		Each
Zinc-Plated Steel Base and Stud with Plastic Cushion



	1	M16 × 2 mm	51	500	71	76	Nylon	62805K61	00000


	1	M16 × 2 mm	102	500	71	127	Nylon	62805K62	00000
	1	M16 × 2 mm	102	500	81	127	Nylon	62805K65	00000
	1	M16 × 2 mm	152	500	81	178	Nylon	62805K66	00000

Vibration-Damping Swivel Leveling Mounts with Threaded Stud

With Cushion

A rubber cushion reduces vibration to protect components and extend your machine’s life. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.

304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.

					With Rubber Cushion
	Thread Size	Thread Lg.	Swivel Range of Motion	Base Dia.	Cap. per Mount, lb.	Deflection @ Cap.	Overall Ht.	Cushion Material		Each
304 Stainless Steel Base and Stud



		M16 × 2 mm	4 3/4"	7.5°	2 5/8"	500	0.07"	5 11/16"	Buna-N	6221K47	000000


		M16 × 2 mm	4 3/4"	7.5°	3 7/8"	1,000	0.12"	6 1/8"	Buna-N	6221K48	00000
		M16 × 2 mm	4 3/4"	7.5°	3 7/8"	2,000	0.12"	6 1/8"	Buna-N	6221K49	00000
		M16 × 2 mm	4 3/4"	7.5°	5 1/2"	3,000	0.17"	6 3/4"	Buna-N	6221K146	000000
		M16 × 2 mm	4 3/4"	7.5°	5 1/2"	4,000	0.17"	6 3/4"	Buna-N	6221K147	000000

Stay-Put Swivel Leveling Mounts with Threaded Stud and Offset Hole

One or more offset mounting holes extend from underneath machines to give you more room to drill and install fasteners. These mounts bolt down to secure equipment that doesn’t need to move and prevent it from creeping or tipping. A ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Round Base

1 Mounting Hole

With Cushion

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

					Mounting Holes		With Rubber Cushion
	Thread Size	Thread Lg.	Swivel Range of Motion	Base Dia.	Fasteners Included	Dia.	Cap. per Mount, lb.	Overall Ht.	Cushion Material		Each
304 Stainless Steel Base and Stud







				1 Mounting Hole

				M16 × 2 mm	4"	5°	2 15/16"	No	19/32"	2,695	4 7/8"	Buna-N	6221K926	000000


				M16 × 2 mm	5 5/8"	5°	2 15/16"	No	19/32"	2,695	6 7/8"	Buna-N	6221K927	00000

Load-Rated Reinforced Threaded-Stud Bumpers

Style 1

Tested to support the load of your application. These bumpers support a wide range of equipment—from a 50 lb. saw to a 5,000 lb. air compressor. They also help reduce vibration and protect whatever they’re mounted to. All have a metal base plate for added strength and a longer service life than all-rubber bumpers. No separate fasteners are needed—just twist them into a threaded hole.

Natural Rubber with Steel Stud and Base Plate

Style 1

These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Max. Load, lb.	Deflection @ Cap.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 1



		M16 × 2 mm	41	100	40	2,720	0.39"	Durometer 50A	Medium	Black	-10 to 150	No	No	93115K991	000000


		M16 × 2 mm	41	100	60	2,910	0.59"	Durometer 50A	Medium	Black	-10 to 150	No	No	93115K993	00000
		M16 × 2 mm	41	125	75	5,340	0.7"	Durometer 70A	Hard	Black	-40 to 170	No	No	3810N177	00000

Swivel Leveling Mounts with Threaded Hole

Without Cushion

With Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.

Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Dp., mm	Swivel Range of Motion	Base Dia., mm	Cap. per Mount, lb.	Overall Ht., mm		Each	Cap. per Mount, lb.	Overall Ht., mm	Cushion Material		Each
Nickel-Plated Steel Base



		M16 × 2 mm	11.1	7.5°	64	5,950	32	6103K605	000000	4,505	35	Natural Rubber	6103K613	000000


		Zinc-Yellow-Chromate-Plated Steel Base



				M16 × 2 mm	11	7.5°	64	5,940	32	6120K35	00000	4,500	35	Natural Rubber	6120K43	00000


				303 Stainless Steel Base



						M16 × 2 mm	11.1	7.5°	64	5,940	32	6120K51	00000	4,505	35	Neoprene	6120K76	00000

Stay-Put Sanitary Swivel Leveling Mounts with Threaded Stud and Offset Hole

With Cushion

Free of crevices where bacteria can grow, these mounts have an extremely smooth finish, rounded edges, and a covered stud. A silicone seal at the base of the thread cover keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. You can also bolt them down so machines don’t creep across the floor or tip over. The mounting hole extends from underneath your machine to give you more room to drill and install fasteners. A ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

						Mounting Holes				With Rubber Cushion
	Thread Size	Thread Lg.	Mounting Ht.	Swivel Range of Motion	Base Dia.	Fasteners Included	No. of	Dia.	Food Industry Std.	Cap. per Mount, lb.	Overall Ht.	Cushion Material		Each
304 Stainless Steel Base and Stud



		M16 × 2 mm	2 7/8"	4 1/8" to 5 1/2"	10°	2 9/16"	No	1	19/32"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	2,000	7"	Buna-N	6903N31	000000

Sanitary Swivel Leveling Mounts with Threaded Stud

With

Cushion

With an extremely smooth finish, rounded edges, and a covered stud, these mounts are free of crevices where bacteria can grow. They have a silicone seal at the base of the thread cover that keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. They also have a rubber cushion that reduces vibration to extend your machine’s life. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

With an extremely smooth finish, rounded edges, and a covered stud, these mounts are free of crevices where bacteria can grow. They have a silicone seal at the base of the thread cover that keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

							With Rubber Cushion
	Thread Size	Thread Lg.	Mounting Ht.	Swivel Range of Motion	Base Dia.	Food Industry Std.	Cap. per Mount, lb.	Overall Ht.	Cushion Material		Each
304 Stainless Steel Base and Stud



		M16 × 2 mm	2 7/8"	4 1/8" to 5 1/2"	10°	2 9/16"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	2,000	7"	Buna-N	6903N26	000000

Shock-Absorbing Swivel Leveling Mounts with Threaded Stud

Absorb sudden impacts from heavy machinery, such as punch presses, die cutters, and generators that jolt as they power on. These mounts have a solid rubber base, similar to a hockey puck, that isolates shock to protect floors and equipment from damage. The base also cuts down on noise and grips the floor so equipment doesn't slide when it's vibrating. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Square Neoprene Base with Zinc-Plated Steel Stud

Image of Product. Front orientation. Leveling Mounts. Shock-Absorbing Swivel Leveling Mounts with Threaded Stud, Square Base.

					Base
Thread Size	Thread Lg.	Cap. per Mount, lb.	Deflection @ Cap.	Swivel Range of Motion	Lg.	Wd.	Overall Ht.		Each
M16 × 2 mm	2 7/16"	350	0.13"	7.5°	3"	3"	3 1/4"	63965K79	000000
M16 × 2 mm	2 7/16"	700	0.13"	7.5°	3"	3"	3 1/4"	63965K81	00000

Round Neoprene Base with Zinc-Plated Steel Stud

Image of Product. Front orientation. Leveling Mounts. Shock-Absorbing Swivel Leveling Mounts with Threaded Stud, Round Base.

Thread Size	Thread Lg.	Cap. per Mount, lb.	Deflection @ Cap.	Swivel Range of Motion	Base Dia.	Overall Ht.		Each
M16 × 2 mm	2 7/16"	500	0.13"	7.5°	3"	3 3/8"	63965K82	000000
M16 × 2 mm	2 7/16"	1,000	0.13"	7.5°	3"	3 3/8"	63965K83	00000

Reinforced Threaded-Stud Bumpers with Steel Core

Style 1

Our most durable and impact-resistant bumpers. With a steel core, they withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers and noise reducers. No separate fasteners are needed—just twist them into a threaded hole.

Multipurpose Neoprene About Multipurpose Neoprene

Style 1

A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Overall Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Stud Material	Nonmarking	For Use Outdoors		Each
Style 1



		M16 × 2 mm	15	32	32	47	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	Yes	Yes	9546K247	000000


		M16 × 2 mm	15	32	32	47	Durometer 75A	Hard	Black	-40 to 200	Steel	Yes	Yes	9546K537	00000
		M16 × 2 mm	30	32	32	62	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	Yes	Yes	9546K253	00000
		M16 × 2 mm	30	32	32	62	Durometer 75A	Hard	Black	-40 to 200	Steel	Yes	Yes	9546K538	00000
		M16 × 2 mm	30	45	42	72	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	Yes	Yes	9546K255	00000
		M16 × 2 mm	30	45	42	72	Durometer 75A	Hard	Black	-40 to 200	Steel	Yes	Yes	9546K539	00000

Abrasion-Resistant Polyurethane Rubber About Abrasion-Resistant Polyurethane Rubber

Style 1

Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Overall Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Stud Material	Nonmarking	For Use Outdoors		Each
Style 1



		M16 × 2 mm	15	32	32	47	Durometer 80A	Hard	Red	-60 to 200	Steel	Yes	Yes	9546K248	000000


		M16 × 2 mm	30	32	32	62	Durometer 80A	Hard	Red	-60 to 200	Steel	Yes	Yes	9546K264	00000
		M16 × 2 mm	30	45	42	72	Durometer 80A	Hard	Red	-60 to 200	Steel	Yes	Yes	9546K266	00000

High-Capacity Press-Fit Leveling Mount Inserts

Rated for high load capacity, use these inserts to connect threaded leveling mounts to machinery, instrument bases, and conveyor equipment with tubular legs. These inserts have pass-through holes that are partially threaded at the base. Tap mounts into place with a rubber hammer.

For Square Legs


Shown with Brass Insert Installed

Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.

	For Leg						Thread
	Outer Lg.	Outer Wd.	Inner Lg.	Inner Wd.	Cap. per Mount, lb.	Overall Ht.	, mm	Size	Type	Dp.	Temp., ° F		Each
Plastic with Brass Insert



		1 1/2"	1 1/2"	1 5/16"	1 5/16"	1,500	1 11/16"	2	M16	Metric	1"	-20 to 180	60945K77	00000


		2"	2"	1 3/4"	1 3/4"	2,000	2"	2	M16	Metric	1"	-20 to 180	60945K82	0000

For Round Legs


Shown with Brass Insert Installed

Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.

	For Leg				Thread
	ID	OD	Cap. per Mount, lb.	Overall Ht.	, mm	Size	Type	Dp.	Temp., ° F		Each
Plastic with Brass Insert



		1 5/16"	1 1/2"	1,500	1 11/16"	2	M16	Metric	1"	-20 to 180	60945K93	00000


		1 13/16"	2"	2,000	1 15/16"	2	M16	Metric	1"	-20 to 180	60945K97	0000

Shock-Absorbing Air Spring Vibration-Damping Mounts

Neutralize shock and vibration from your machine no matter how hard it heaves or hammers. These mounts use air pressure rather than a steel frame to support a load. That means four times the deflection and vibration control of a typical bolt-down mount. Fill them with air and stick them under heavy machinery to keep floors intact, seals tight, and fasteners secure. They’ll also soak up the vibration from floors and mounting plates that bumps optical and other precision tools out of alignment.

Threaded-Insert Mount

Image of Product. Front orientation. Vibration-Damping Mounts. Shock-Absorbing Air Spring Vibration-Damping Mounts.

									Base			Mounting					Air Inlet
	Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Dia.	Ht.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Max. Pressure, psi	Thread Size	Thread Type		Each
Multipurpose Neoprene



		M16 × 2 mm	2,400	0.5"	Not Rated	Not Rated	3.5"	9.66"	2.94"	10"	10"	-20 to 180	No	4	0.56"	8.5"	85	0.305"-32	Schrader	62075K35	0000000

Reinforced Threaded-Hole Bumpers

Style 1

With a metal base plate for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers and noise reducers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.

Multipurpose Neoprene About Multipurpose Neoprene

Style 1

A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Base Plate Material	Nonmarking	For Use Outdoors		Each
Style 1



		M16 × 2 mm	13	32	32	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	No	Yes	9546K227	000000


		M16 × 2 mm	13	32	32	Durometer 70A	Hard	Black	-40 to 200	Steel	No	Yes	9546K476	00000
		M16 × 2 mm	16	45	42	Durometer 70A	Hard	Black	-40 to 200	Steel	No	Yes	9546K477	00000

Abrasion-Resistant Polyurethane Rubber About Abrasion-Resistant Polyurethane Rubber

Style 1

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Base Plate Material	Nonmarking	For Use Outdoors		Each
Style 1



		M16 × 2 mm	13	32	32	Durometer 80A	Hard	Red	-40 to 200	Steel	No	Yes	9223K172	000000


		M16 × 2 mm	16	45	42	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	No	Yes	9546K484	00000
		M16 × 2 mm	16	45	42	Durometer 95A	Extra Hard	Black	-40 to 200	Steel	No	Yes	9546K493	00000

Swivel Pads for Screws and Threaded Studs

Attach to the end of a screw or threaded stud to apply uniform pressure on uneven and angled surfaces. Also known as toggle and swivel-foot pads.

	Ht., mm	Load Cap., lb.	Thread Size	Range of Motion	Tip Material		Each
Steel



	25	29.5	3,130	M16	20°	Steel	3098N16	000000

Threaded-Stem Leveling Casters


Swivel Casters, Thumb-Wheel Adjustment	Swivel Casters Nut Adjustment

Install these casters into a threaded hole and adjust the leveling pad to keep your equipment stationary and compensate for uneven floors. Wheels ride directly on the axle rather than on bearings, making them an economical choice for equipment not frequently moved. Casters have dual-raceway swivel bearings for the smoothest swiveling.

Nylon—Nylon wheels are impact and wear resistant. They work well on smooth surfaces.

Polyurethane Rubber—Polyurethane rubber wheels combine the abrasion resistance of plastic and the vibration absorption of rubber. Use them on smooth or rough floors and in areas with debris.

Thumb-Wheel Adjustment—Turn the thumb wheel to lower or raise the leveling pad.

Nut Adjustment—Nut adjustment requires a wrench to move the leveling pad.

Shielded Bearing—Shielded bearings protect from dust and debris.

	Wheel						Adjustment			Frame		Swivel Casters
	Dia.	Wd.	Mount Ht.	Wt. Cap. per Caster, lb.	Hardness	Stem Lg.	Mechanism	Nut Thread Size	Swivel Bearing Seal Type	Material	Color		Each
5/8"-11 Stem Thread Size







				Nonmarking Black Solid Nylon Wheel—Hard

				2 7/8"	1 1/4"	4 25/32" to 5 1/2"	2,200	Durometer 90D	1 3/8"	Nut	M16	Shielded	Powder-Coated Aluminum	Ivory	2445T55	000000


				M16 Stem Thread Size







								Nonmarking Black Solid Nylon Wheel—Hard

								2 7/8"	1 1/4"	4 25/32" to 5 1/2"	2,200	Durometer 90D	1 5/16"	Nut	M16	Shielded	Powder-Coated Aluminum	Ivory	2445T48	00000


								2 7/8"	1 1/4"	4 13/16" to 5 9/32"	1,650	Durometer 90D	1 3/16"	Thumb Wheel	—	Shielded	Powder-Coated Aluminum	Ivory	2445T47	00000




										Nonmarking White Tread-on-Core Polyurethane Rubber Wheel—Hard

										3"	1 3/16"	4 3/4" to 5 3/16"	1,750	Durometer 70D	15/16"	Thumb Wheel	—	Open	Powder-Coated Aluminum	Ivory	2445T31	000000

Load-Rated Reinforced Threaded-Hole Bumpers

Style 1

Tested to ensure they’ll bear the weight of your application, these bumpers support everything from a 50-pound saw to a 2,000-pound air compressor. They also help reduce vibration and protect whatever they're mounted to. All have a metal base plate for added strength and a longer life than all-rubber bumpers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.

Natural Rubber with Steel Base Plate

Style 1

These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Max. Load, lb.	Deflection @ Cap.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 1



		M16 × 2 mm	16	100	40	2,110	0.39"	Durometer 40A	Medium Soft	Black	-40 to 170	Yes	No	9377K398	000000


		M16 × 2 mm	16	100	40	2,720	0.39"	Durometer 55A	Medium	Black	-20 to 150	Yes	No	93115K791	00000

Light Duty Furniture Threaded-Stem Casters with Rubber Wheels

Swivel with Total

Lock

Also known as twin-wheel casters, these lightweight casters are often used on displays and furniture. Wheels have a soft rubber tread for shock resistance with a hard aluminum core for strength. Use them on rough or smooth floors. Roller wheel bearings provide smooth rolling and are sealed for the best protection against dust and debris. The swivel has dual-raceway bearings for the smoothest swiveling.

Wheel Brake and Swivel Lock (Total Lock)—Casters with total lock brake the wheel and lock the swivel with one press of the foot pedal.

	Wheel						Wheel Bearing		Swivel Bearing		Swivel with Total Lock
	Dia.	Wd.	Mount Ht.	Wt. Cap. per Caster, lb.	Hardness	Stem Lg., mm	Type	Seal Type	Construction	Seal Type		Each
M16 Stem Thread Size







				Gray Tread-on-Core Wheels—Medium

				5"	2 13/16"	5 11/16"	170	Durometer 90A	20	Roller	Sealed	Dual Raceway	Open	24805T66	0000000

Inside Diameter Fixture Clamps


		Top Actuation

Secure a workpiece from the inside diameter, leaving the outside clear for machining. Machine these clamps to match the precise size and contours of your workpiece ID. Mount the clamp to your fixture with the included screws and place your workpiece over it. Turn the socket head cap screw to expand the clamp.

Top Actuation—Top-actuated clamps tighten from the top of the clamp, so workpieces need a through hole.

						Thread		Drive
	For ID Range, mm	Max. Clamp Expansion, mm	Ht., mm	Flange OD, mm	Max. Clamping Force, lbf	Size	Lg., mm	Size, mm	Style	Mounting Fasteners Included	No. of Mounting Holes	Material	Screw Material		Each
Top Actuation



		29.3 to 42	0.38	39.6	69.5	10,000	M16 × 2 mm	45	14	Hex	Yes	3	Steel	Steel	1341N317	0000000


		29.3 to 51.5	0.38	39.6	75.5	10,000	M16 × 2 mm	45	14	Hex	Yes	3	Steel	Steel	1341N318	000000
		29.3 to 77.7	0.38	45.5	107.5	10,000	M16 × 2 mm	50	14	Hex	Yes	3	Steel	Steel	1341N319	000000

Leveling Plate Casters


Swivel Casters Nut Adjustment

Use screws or bolts to attach the mounting plate on these casters to a flat surface. Adjust the leveling pad to keep your equipment stationary and compensate for uneven floors.

Nylon—Nylon wheels are impact- and wear-resistant. They work well on smooth surfaces.

Nut Adjustment—Nut adjustment requires a wrench to move the leveling pad.

Kingpinless Swivel Caster—Kingpinless swivel construction distributes impact better than standard kingpin casters, enabling smooth swiveling and extending service life.

Dual-Raceway Bearing—Dual-raceway swivel bearings swivel more smoothly than ball bearings.

Ball Bearing—Ball bearings provide smooth swiveling.

	Wheel				Adjustment		Mounting Plate		Screw			Frame			Swivel Bearing		Swivel Casters
	Dia.	Wd.	Mount Ht.	Wt. Cap. per Caster, lb.	Mechanism	Nut Thread Size	Lg.	Wd.	Size	Lg.	Mounting Fasteners Included	Material	Color	Caster Swivel Construction	Construction	Type		Each
Nonmarking Black Solid Nylon Wheel—Hard



		2 7/8"	1 1/4"	4 25/32" to 5 1/2"	2,200	Nut	M16	3 3/4"	3 3/4"	M10	0.984"	Yes	Powder-Coated Aluminum	Ivory	Kingpinless	—	Ball	9008T45	000000


		2 15/16"	1 3/16"	4 3/4" to 5 3/16"	2,200	Nut	M16	3 3/4"	3 3/4"	M10	13/16"	Yes	Powder-Coated Aluminum	Black	Kingpin	Dual Raceway	Ball	9008T46	000000
		2 15/16"	1 3/16"	4 3/4" to 5 3/16"	2,200	Nut	M16	4 1/2"	4"	M10	1"	Yes	Powder-Coated Aluminum	Ivory	Kingpin	Dual Raceway	Ball	24125T27	00000

Fixture Clamps

Hold a workpiece securely from the side with minimal contact, leaving more of the workpiece free for machining. Thread the clamp into a tapped hole and give the center screw a half turn for quick clamping.

Head					Thread		Drive			Each		Package
Wd., mm	Ht., mm	Max. Movement, mm	Material	Max. Clamping Force, lbf	Size	Lg., mm	Size, mm	Style	Screw Material		Each	Pkg. Qty.		Pkg.



	30.13	12.7	2.54	Brass	5,950	M16 × 2 mm	28.5	12	Hex	Steel	84865A86	000000	4	84865A96	000000