About Finishing
More
Polishing Bobs
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4811a19p1-a05e-digital@halfx_637070604460970148.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a65p1-a05e-digital@halfx_637070598308391241.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a81p1-a05e-digital@halfx_637046330438236467.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a67p1-a05e-digital@halfx_637070604240181274.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a63p1-a05e-digital@halfx_637070604527410655.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a27p1-a05e-digital@halfx_637070598386135185.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a23p1-a05e-digital@halfx_637067460192294958.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a61p2-a05e-@halfx_637118313056773681.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a59p1-a05e-digital@halfx_637070597742027949.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a84p1-a05e-digital@halfx_637069017700459487.png?ver=imagenotfound)
Polish small areas and hard-to-reach spots. Use these bobs with lapping pastes and buffing compounds and a drill or grinder for bits and burs.
Choose soft bobs for a finer finish.
For technical drawings and 3-D models, click on a part number.
Head | Soft | Medium | ||||||
---|---|---|---|---|---|---|---|---|
Dia. | Lg. | Shank Dia. | Max. Speed, rpm | Material | Each | Each | ||
Cylinder with Flat Tip | ||||||||
1/4" | 1/4" | 1/8" | 20,000 | Felt | 0000000 | 00000 | 0000000 | 00000 |
3/8" | 1/2" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
1/2" | 1/2" | 1/8" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
1/2" | 3/4" | 1/8" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
1/2" | 1" | 1/8" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
3/4" | 3/4" | 1/8" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
3/4" | 1" | 1/8" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
1" | 1" | 1/4" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
1" | 2" | 1/4" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
1 1/4" | 1 1/4" | 1/4" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
1 1/2" | 1" | 1/4" | 20,000 | Felt | 00000000 | 00000 | 0000000 | 00000 |
1 1/2" | 1 1/2" | 1/4" | 20,000 | Felt | 00000000 | 00000 | 0000000 | 00000 |
Cylinder with Rounded Tip | ||||||||
1/2" | 1" | 1/8" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
3/4" | 1 1/2" | 1/4" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
1" | 2" | 1/4" | 20,000 | Felt | 00000000 | 00000 | 0000000 | 00000 |
Cylinder with Pointed Tip | ||||||||
1/4" | 3/4" | 3/32" | 20,000 | Felt | 000000 | 00 | 0000000 | 0000 |
5/16" | 5/8" | 3/32" | 20,000 | Felt | 000000 | 00 | 0000000 | 0000 |
Ball with Rounded Tip | ||||||||
5/16" | 3/8" | 3/32" | 20,000 | Felt | 000000 | 00 | 0000000 | 0000 |
1/2" | 1/2" | 1/8" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
3/4" | 3/4" | 1/4" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
1" | 1" | 1/4" | 20,000 | Felt | 00000000 | 00000 | 0000000 | 00000 |
Oval with Rounded Tip | ||||||||
1/2" | 1/2" | 1/8" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
3/4" | 3/4" | 1/8" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
1" | 1" | 1/4" | 20,000 | Felt | 00000000 | 00000 | 0000000 | 00000 |
Pear with Rounded Tip | ||||||||
1/2" | 3/4" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
3/4" | 1" | 1/4" | 20,000 | Felt | 0000000 | 00000 | 0000000 | 0000 |
1" | 1 1/4" | 1/4" | 20,000 | Felt | 0000000 | 00000 | 0000000 | 00000 |
Cone with Flat Tip | ||||||||
1/2" | 3/4" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
3/4" | 1" | 1/4" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
1" | 1 1/4" | 1/4" | 20,000 | Felt | 0000000 | 00000 | 0000000 | 00000 |
Cone with Rounded Tip | ||||||||
1/2" | 1" | 1/8" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
3/4" | 1 1/2" | 1/4" | 20,000 | Felt | 00000000 | 0000 | 0000000 | 0000 |
1" | 2" | 1/4" | 20,000 | Felt | 00000000 | 00000 | 0000000 | 00000 |
Tear Drop with Pointed Tip | ||||||||
3/8" | 3/4" | 3/32" | 20,000 | Felt | 000000 | 00 | 0000000 | 0000 |
Disc with Flat Edge | ||||||||
5/8" | 1/4" | 3/32" | 20,000 | Felt | 000000 | 00 | 0000000 | 0000 |
7/8" | 1/4" | 3/32" | 20,000 | Felt | 000000 | 00 | 0000000 | 0000 |
1" | 1/4" | 3/32" | 20,000 | Felt | 000000 | 00 | 0000000 | 0000 |
Aggressive Polishing Bobs
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4811a19p1-a05e-digital@halfx_637070604460970148.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a65p1-a05e-digital@halfx_637070598308391241.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a81p1-a05e-digital@halfx_637046330438236467.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a67p1-a05e-digital@halfx_637070604240181274.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a63p1-a05e-digital@halfx_637070604527410655.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a27p1-a05e-digital@halfx_637070598386135185.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a23p1-a05e-digital@halfx_637067460192294958.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a61p2-a05e-@halfx_637118313056773681.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a59p1-a05e-digital@halfx_637070597742027949.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a84p2-a05e-digital@halfx_637075853802526477.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/481/4812a92p1-a05e-digital@halfx_637064045694872369.png?ver=imagenotfound)
Remove scratches from your workpiece with these hard bobs. Use them with lapping pastes and buffing compounds and a drill or grinder for bits and burs.
Choose rock hard bobs for the most aggressive material removal or when working with hard materials.
For technical drawings and 3-D models, click on a part number.
Head | Hard | Rock Hard | ||||||
---|---|---|---|---|---|---|---|---|
Dia. | Lg. | Shank Dia. | Max. Speed, rpm | Material | Each | Each | ||
Cylinder with Flat Tip | ||||||||
1/4" | 1/4" | 1/8" | 20,000 | Felt | 0000000 | 00000 | 0000000 | 00000 |
3/8" | 1/2" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
1/2" | 1/2" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
1/2" | 3/4" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
1/2" | 1" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
3/4" | 3/4" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
3/4" | 1" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
1" | 1" | 1/4" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
1" | 2" | 1/4" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
1 1/4" | 1 1/4" | 1/4" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
1 1/2" | 1" | 1/4" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 00000 |
1 1/2" | 1 1/2" | 1/4" | 20,000 | Felt | 0000000 | 00000 | 0000000 | 00000 |
Cylinder with Rounded Tip | ||||||||
1/2" | 1" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
3/4" | 1 1/2" | 1/4" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
1" | 2" | 1/4" | 20,000 | Felt | 0000000 | 00000 | 0000000 | 00000 |
Cylinder with Pointed Tip | ||||||||
1/4" | 3/4" | 3/32" | 20,000 | Felt | 0000000 | 0000 | 000000 | 00 |
5/16" | 5/8" | 3/32" | 20,000 | Felt | 0000000 | 0000 | 000000 | 00 |
Ball with Rounded Tip | ||||||||
5/16" | 3/8" | 3/32" | 20,000 | Felt | 0000000 | 0000 | 000000 | 00 |
1/2" | 1/2" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
3/4" | 3/4" | 1/4" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
1" | 1" | 1/4" | 20,000 | Felt | 0000000 | 00000 | 0000000 | 00000 |
Oval with Rounded Tip | ||||||||
1/2" | 1/2" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
3/4" | 3/4" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
1" | 1" | 1/4" | 20,000 | Felt | 0000000 | 00000 | 0000000 | 00000 |
Pear with Rounded Tip | ||||||||
1/2" | 3/4" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
3/4" | 1" | 1/4" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 00000 |
1" | 1 1/4" | 1/4" | 20,000 | Felt | 0000000 | 00000 | 0000000 | 00000 |
Cone with Flat Tip | ||||||||
1/2" | 3/4" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
3/4" | 1" | 1/4" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
1" | 1 1/4" | 1/4" | 20,000 | Felt | 0000000 | 00000 | 0000000 | 00000 |
Cone with Rounded Tip | ||||||||
1/2" | 1" | 1/8" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
3/4" | 1 1/2" | 1/4" | 20,000 | Felt | 0000000 | 0000 | 0000000 | 0000 |
1" | 2" | 1/4" | 20,000 | Felt | 0000000 | 00000 | 0000000 | 00000 |
Tear Drop with Pointed Tip | ||||||||
3/8" | 3/4" | 3/32" | 20,000 | Felt | 0000000 | 0000 | 000000 | 00 |
Disc with Flat Edge | ||||||||
5/8" | 1/4" | 3/32" | 20,000 | Felt | 0000000 | 0000 | 000000 | 00 |
7/8" | 1/4" | 3/32" | 20,000 | Felt | 0000000 | 0000 | 000000 | 00 |
1" | 1/4" | 3/32" | 20,000 | Felt | 0000000 | 0000 | 000000 | 00 |
Disc with Tapered Edge | ||||||||
5/8" | 3/16" | 3/32" | 20,000 | Felt | 0000000 | 0000 | 000000 | 00 |
3/4" | 3/16" | 3/32" | 20,000 | Felt | 0000000 | 0000 | 000000 | 00 |
7/8" | 3/16" | 3/32" | 20,000 | Felt | 0000000 | 0000 | 000000 | 00 |
No-Mess Polishing Bobs for Stainless Steel and Hard Metals
![](/prerenderstable/mvPRE/contents/gfx/imagecache/456/4564a57p2-a05e-digital@halfx_637075973314390083.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/456/4564a97-4564a64-@halfx_637118321716768294.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/456/4564a84p2-@halfx_637075950259136987.png?ver=imagenotfound)
The long-lasting diamond abrasive is already embedded in these bobs so you don’t need messy compounds. Polish small areas and hard-to-reach spots using a drill or grinder for bits and burs. Grit is approximate.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||
---|---|---|---|---|---|---|---|---|---|
Dia. | Lg. | Shank Dia. | Max. Speed, rpm | Abrasive Material | Material | For Finish | Choose a Grit | Each | |
For Use On Stainless Steel, Titanium, Steel, Iron, Nickel | |||||||||
Cylinder with Flat Tip | |||||||||
1/4" | 1/4" | 1/8" | 15,000 | Diamond | Felt | Polished | 0000000 | 00000 | |
1/2" | 1/2" | 1/8" | 15,000 | Diamond | Felt | Polished | 0000000 | 0000 | |
3/4" | 3/4" | 1/8" | 15,000 | Diamond | Felt | Polished | 0000000 | 00000 | |
Cylinder with Rounded Tip | |||||||||
3/8" | 1/2" | 1/8" | 15,000 | Diamond | Felt | Polished | 0000000 | 0000 | |
Cone with Rounded Tip | |||||||||
3/8" | 1/2" | 1/8" | 15,000 | Diamond | Felt | Polished | 0000000 | 0000 | |
1/2" | 1" | 1/8" | 15,000 | Diamond | Felt | Polished | 0000000 | 00000 | |
3/4" | 1 1/2" | 1/4" | 15,000 | Diamond | Felt | Polished | 0000000 | 00000 |
No-Mess Polishing Bobs for Aluminum, Soft Metals, and Nonmetals
![](/prerenderstable/mvPRE/contents/gfx/imagecache/456/4564a57p1-a05e-digital@halfx_637075968543566976.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/456/4564a64p1-a05e-digital@halfx_637072391111473554.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/456/4564a61p1-a05e-digital@halfx_637072393692987494.png?ver=imagenotfound)
The silicon carbide abrasive cuts quickly with light pressure. It’s embedded in these bobs so you don’t need messy compounds. Polish small areas and hard-to-reach spots using a drill or grinder for bits and burs. Grit is approximate.
For technical drawings and 3-D models, click on a part number.
Head | |||||||
---|---|---|---|---|---|---|---|
Dia. | Lg. | Shank Dia. | Max. Speed, rpm | Abrasive Material | Choose a Grit | Each | |
For Use On Aluminum, Brass, Bronze, Copper, Plastic, Rubber | |||||||
Cylinder with Flat Tip—Felt | |||||||
1/4" | 1/4" | 1/8" | 15,000 | Silicon Carbide | 0000000 | 00000 | |
1/2" | 1/2" | 1/8" | 15,000 | Silicon Carbide | 0000000 | 0000 | |
3/4" | 3/4" | 1/8" | 15,000 | Silicon Carbide | 0000000 | 0000 | |
Cylinder with Rounded Tip—Felt | |||||||
3/8" | 1/2" | 1/8" | 15,000 | Silicon Carbide | 0000000 | 0000 | |
Cone with Rounded Tip—Felt | |||||||
3/8" | 1/2" | 1/8" | 15,000 | Silicon Carbide | 0000000 | 0000 | |
1/2" | 1" | 1/8" | 15,000 | Silicon Carbide | 0000000 | 0000 | |
3/4" | 1 1/2" | 1/4" | 15,000 | Silicon Carbide | 0000000 | 0000 |
Buffing Wheel, Bob, and Compound Kits
![](/prerenderstable/mvPRE/contents/gfx/imagecache/479/4791a71p1-a05e-@halfx_637110631017583814.png?ver=imagenotfound)
Most buffing processes have two steps:
Cutting, the first step, removes scratches and surface imperfections.
Coloring, the second step, produces an even finish.
Cutting/coloring compounds perform both steps at once.
For technical drawings and 3-D models, click on a part number.
No. of Pieces | Includes | Each | |
20 | Three Medium Polishing Bobs (Flat-Tip Cylinder, Ball, and Oval)—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Two Medium Polishing Bobs (Pear and Flat-Tip Cone)—1/2" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Two Medium Polishing Bobs (Rounded-Tip Cylinder and Rounded-Tip Cone)—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Eight Buffing Wheels (Four Flat-Edge and Four Tapered-Edge)—3/4" Dia. × 1/8" Thick. One 1/8" Dia. Shank for Buffing Wheels One 1/2 oz. Extra-Smooth-Finish Brown Coloring Compound One 1/2 oz. Polished-Finish Red Rouge Cutting/Coloring Compound One 1/2 oz. Polished-Finish White Rouge Cutting/Coloring Compound One 1/2 oz. Polished-Finish Black Cutting/Coloring Compound | 0000000 | 000000 |
Buffing and Polishing Kits for Dremel
![](/prerenderstable/mvPRE/contents/gfx/imagecache/474/4742n11-@halfx_1706643093.png?ver=imagenotfound)
Buff, polish, and clean with these kits.
Number of Pieces | For Manufacturer Model Number | Includes | Each | |
20 | 100, 100-N/7, 200, 3000, 3000-1/24, 7760-N/10, 8220, 8220-1/28, 8240, 8250, 8260 | Six Buffing Wheels—1/2" Dia. Five Buffing Wheels—1" Dia. Cup-Style Polishing Brush—1/2" Brush Dia. × 1/8" Shank Dia. End-Style Polishing Brush—1/8" Brush Dia. × 1/8" Shank Dia. Two Wheel-Style Polishing Brushes—3/4" Brush Dia. × 1/8" Shank Dia. Polishing Bob—3/8" Head Dia. Polishing Bob with 1/8" Shank—1/2" Head Dia. Slotted-Head Mandrel—1/8" Shank Dia. Spiral Mandrel—1/8" Shank Dia. Polishing Compound Plastic Case | 0000000 | 000000 |