About Heat-Shrink Tubing
More
About Plastic and Rubber Tubing
More
Ultra-Chemical-Resistant Soft Plastic Tubing
- Flexible
- Compatible with Single-Barbed Tube Fittings
- Soft (Durometer 65A)
- Temperature Range: -30° to 160° F
An FEP (fluorinated ethylene propylene) liner gives this tubing better chemical resistance than any of our other soft tubing. It also provides a smooth interior for unrestricted flow. Tubing is also known as Versilon and formerly was known as Tygon. It is clear, so you can easily monitor flow. It is flexible, so it bends easily around objects.
For technical drawings and 3-D models, click on a part number.
| ID | OD | Wall Thick. | Max. Pressure | Color | Lengths, ft. | Per Ft. | |
Clear Versilon PVC Plastic | |||||||
|---|---|---|---|---|---|---|---|
| 1/16" | 1/8" | 1/32" | 100 psi @ 72° F | Clear | 0000000 | 00000 | |
| 1/8" | 1/4" | 1/16" | 85 psi @ 72° F | Clear | 0000000 | 0000 | |
| 3/16" | 5/16" | 1/16" | 75 psi @ 72° F | Clear | 0000000 | 0000 | |
| 1/4" | 3/8" | 1/16" | 55 psi @ 72° F | Clear | 0000000 | 0000 | |
| 3/8" | 9/16" | 3/32" | 50 psi @ 72° F | Clear | 0000000 | 0000 | |
| 1/2" | 3/4" | 1/8" | 45 psi @ 72° F | Clear | 0000000 | 0000 | |
| 3/4" | 1" | 1/8" | 30 psi @ 72° F | Clear | 0000000 | 00000 | |
Ultra-Chemical-Resistant Firm Plastic Tubing
- Semi-Flexible
- Compatible with Barbed Tube Fittings
- Firm (Durometer 45D)
- Temperature Range: -20° to 170° F
An FEP (fluorinated ethylene propylene) liner gives this tubing better chemical resistance than any of our other firm tubing. It also provides a smooth interior for easy cleaning and unrestricted flow. Tubing is semi-clear, so you get a limited view inside the line. It is semi-flexible, so it is good for gradual bends.
For technical drawings and 3-D models, click on a part number.
| ID | OD | Wall Thick. | Bend Radius | Max. Pressure | Color | Lengths, ft. | Per Ft. | |
Semi-Clear Polyethylene Plastic | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/8" | 1/4" | 1/16" | 1" | 220 psi @ 72° F | White | 0000000 | 00000 | |
| 3/16" | 1/4" | 1/32" | 1 1/4" | 85 psi @ 72° F | White | 0000000 | 0000 | |
| 1/4" | 3/8" | 1/16" | 1 1/2" | 150 psi @ 72° F | White | 0000000 | 0000 | |
| 3/8" | 1/2" | 1/16" | 4" | 85 psi @ 72° F | White | 0000000 | 0000 | |
| 1/2" | 5/8" | 1/16" | 6" | 60 psi @ 72° F | White | 0000000 | 0000 | |
High-Temperature Moisture-Seal Heat-Shrink Tubing
- Material: PTFE Plastic
- Shrink Ratio: See Table
- Dielectric Strength: 455 V/mil
- Shrink Temperature: 660° F
- Temperature Range: -450° to 450° F
Create a moisture-resistant seal in applications where temperatures reach up to 450° F. The inner lining melts when the tubing is heated and bonds to the underlying surface, creating a water-resistant seal. Made of PTFE, it also resists abrasion and chemicals. Choose tubing with a larger shrink ratio to create a tight seal over irregularly shaped objects.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
For technical drawings and 3-D models, click on a part number.
ID | 1/2 ft. Lg. | 4 ft. Lg. | ||||||
|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Shrink Ratio | Color | Each | Each | ||
| 0.07" | 0" | Not Rated | Not Rated | White | 00000000 | 00000 | 00000000 | 000000 |
| 0.19" | 0.07" | 0.02" | 2.7:1 | White | 00000000 | 0000 | 00000000 | 00000 |
| 0.24" | 0.15" | 0.02" | 1.6:1 | White | 00000000 | 0000 | 00000000 | 00000 |
| 0.35" | 0.21" | 0.03" | 1.7:1 | White | 00000000 | 00000 | 00000000 | 00000 |
| 0.48" | 0.32" | 0.03" | 1.5:1 | White | 00000000 | 00000 | 00000000 | 000000 |
| 0.7" | 0.5" | 0.04" | 1.4:1 | White | 00000000 | 00000 | 00000000 | 000000 |
| 1" | 0.7" | 0.05" | 1.4:1 | White | 00000000 | 00000 | 00000000 | 000000 |