How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
High-Polish Metal Quick-Clamp Sanitary Tube Fittings
- Temperature Range: See Gaskets
The smooth finish inside these fittings makes it easy to remove product residue. Also known as aseptic and tri-clamp fittings, they connect with a gasket, a clamp, and another quick-clamp fitting for a fast and easy way to access your line. The pressure rating of the fitting will vary depending on the clamp you choose, and the temperature rating will vary based on the gasket material you choose.
Inch fittings connect to another same-size fitting and squeeze the gasket in between for a tight seal.
304 stainless steel fittings have very good corrosion resistance. 316 stainless steel fittings have excellent corrosion resistance.
3-A certified fittings comply with sanitary standards.
Note: To complete a connection, you’ll need two quick-clamp fittings, a clamp, and a gasket (all sold separately).
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Beverage, Dairy, Food, Water
- Tubing:
Inch: Use with welded 304/304L or 316/316L stainless steel that meets ASTM A269 or ASTM 270
Metric: Use with welded 304/304L or 316/316L stainless steel - Specifications Met: See table
Fittings with butt-weld end are also known as ferrules; they weld to tubing for a permanent, flush connection.
For Tube OD | |||||||
|---|---|---|---|---|---|---|---|
| Quick Clamp | Butt Weld | Flange OD | Lg. | Wall Thick. | Specifications Met | Each | |
Inch | |||||||
| 4" | 3" | 4.682" | 5/8" | 0.065" | 3-A Certified 63-04 | 00000000 | 0000000 |
| 4" | 4" | 4.682" | 5/8" | 0.083" | 3-A Certified 63-04 | 00000000 | 00000 |
For Tube OD | ||||||||
|---|---|---|---|---|---|---|---|---|
| Quick Clamp | Butt Weld | Flange OD | Lg. | Wall Thick. | Specifications Met | Certification | Each | |
Inch | ||||||||
| 4" | 3" | 4.682" | 5/8" | 0.065" | 3-A Certified 63-04 | Material Certificate with Traceable Lot Number and Test Report | 000000000 | 0000000 |
| 4" | 4" | 4.682" | 5/8" | 0.083" | 3-A Certified 63-04 | Material Certificate with Traceable Lot Number and Test Report | 000000000 | 00000 |
Recessed Nut, Hole for
Lockout, and 2-Pin Hinge
Clamps with wing nut tighten by hand. Clamps with bolt tighten with a wrench. They handle higher pressures than wing-nut clamps for a stronger, more secure hold.
| For Tube OD | For Flange OD | Bolt Material | Max. Pressure | For Tube Specifications Met | Specifications Met | Each | |
304 Stainless Steel with Wing Nut | |||||||
|---|---|---|---|---|---|---|---|
| 4" | 4.682" | __ | 200 psi @ 72 ° F | ASTM A269, ASTM A270 | __ | 00000000 | 000000 |
304 Stainless Steel with Wing Nut, Spring Loaded | |||||||
| 4" | 4.682" | __ | 200 psi @ 72 ° F | ASTM A269, ASTM A270 | __ | 0000000 | 00000 |
304 Stainless Steel with Bolt | |||||||
| 4" | 4.682" | 304 Stainless Steel | 1,000 psi @ 72 ° F | ASTM A269, ASTM A270 | __ | 00000000 | 00000 |
316 Stainless Steel with Wing Nut and 2-Pin Hinge | |||||||
| 4" | 4.682" | __ | 500 psi @ 72 ° F | __ | __ | 0000000 | 00000 |
316 Stainless Steel with Safety Wing Nut and 2-Pin Hinge | |||||||
| 4" | 4.682" | __ | 500 psi @ 72 ° F | __ | __ | 0000000 | 00000 |
316 Stainless Steel with Double Bolt | |||||||
| 4" | 4.682" | 316 Stainless Steel | 820 psi @ 72 ° F | __ | ASME BPVC.VIII | 0000000 | 000000 |
316 Stainless Steel with Recessed Nut, Hole for Lockout, and 2-Pin Hinge | |||||||
| 4" | 4.682" | __ | 500 psi @ 72 ° F | __ | __ | 0000000 | 00000 |
White Nylon Plastic with Wing Nut | |||||||
| 4" | 4.682" | __ | 150 psi @ 72 ° F | ASTM A269, ASTM A270 | __ | 00000000 | 00000 |
Buna-N gaskets are oil resistant. EPDM gaskets resist water and steam and work well in humid environments. Silicone gaskets withstand high temperatures. Fluoroelastomer gaskets stand up to fuel, oil, and acid condensates. PTFE gaskets withstand harsh chemicals, with the exception of molten alkali metal and elemental fluorine.
| For Tube OD | ID | OD | Thick. | Temp. Range, °F | Color | Specifications Met | Each | |
Buna-N Rubber | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3" | 2.900" | 3.580" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
| 4" | 3.870" | 4.680" | 0.203" | -30° to 200° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
EPDM Rubber | ||||||||
| 3" | 2.900" | 3.580" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 4" | 3.870" | 4.680" | 0.203" | -20° to 300° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
Silicone Rubber | ||||||||
| 3" | 2.900" | 3.580" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 4" | 3.870" | 4.680" | 0.203" | -40° to 450° | Clear | 3-A Certified 18-03, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
Fluoroelastomer Rubber | ||||||||
| 3" | 2.900" | 3.580" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
| 4" | 3.870" | 4.680" | 0.203" | -15° to 400° | Black | 3-A Certified 18-03, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
PTFE Plastic | ||||||||
| 3" | 2.900" | 3.580" | 0.203" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
| 4" | 3.870" | 4.680" | 0.203" | -100° to 500° | White | 3-A Certified 20-27, FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
Nuts for Compression Fittings for Copper Tubing
Use these nuts with compression sleeves and fittings to create a strong seal on copper tubing. They are brass for good corrosion resistance.
Long nuts support more of the tube’s surface area than short nuts for a strong grip in high-vibration applications.
Nuts with a built-in sleeve (ferrule) help ensure the sleeve is positioned correctly for installation.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -65° to 250° F, except metric fittings are -40° to 200° F
- Tubing: Use with copper
- Specifications Met: UL listed, except for metric fittings
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD | Wall Thick. | Nut Material | Max. Pressure | Lg. | Each | |
Long Nuts | ||||||
| 3/16" | 0.03" | Brass | 400 psi @ 72° F | 5/8" | 000000000 | 00000 |
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -65° to 250° F
- Tubing: Use with copper
- Specifications Met: UL Listed
For Tube | ||||||||
|---|---|---|---|---|---|---|---|---|
| Nut Style | OD | Wall Thick. | Nut Material | Sleeve Material | Max. Pressure | Lg. | Each | |
| Short | 1" | 0.035" | Brass | Brass | 350 psi @ 72° F | 5/8" | 00000000 | 000000 |
Nuts with Built-In Sleeve for High-Temperature
Compression Tube Fittings for Food and Beverage
- Temperature Range: -40° to 270° F
- Tubing: Use with firm or hard (Durometer 45D-65D) nylon plastic, polyethylene plastic, or polypropylene plastic
- Specifications Met: FDA Compliant 21 CFR 177.2510, NSF/ANSI 51, NSF/ANSI 61, USP Class VI
Use these nuts with high-temperature compression fittings for food and beverage to create a seal on plastic tubing. They have a built-in sleeve (ferrule), so the sleeve is positioned correctly for installation. Thread the nut onto the fitting, then insert the tubing and tighten the nut. Nuts are PVDF (also known as Kynar), which has excellent strength and can handle high temperatures up to 270° F.
For technical drawings and 3-D models, click on a part number.
Nut | Sleeve | ||||||
|---|---|---|---|---|---|---|---|
| For Tube OD | Material | Color | Material | Color | Max. Pressure | Each | |
| 1/4" | PVDF Plastic | White | PVDF Plastic | White | 50 psi @ 72° F | 00000000 | 00000 |