Filter by
System of Measurement
Fitting Connection
Tube Material
Fitting Type
Connects To
Sleeve Material
Shape
Maximum Vacuum @ Temperature
Length
Export Control Classification Number (ECCN)
REACH
DFARS Specialty Metals
Maximum Pressure @ Temperature
Minimum Temperature
Maximum Temperature
For Tube Hardness
Relative Vacuum Rating
How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Sleeves for Compression Fittings for Copper Tubing
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -65° to 200° F, except metric fittings are -40° to 250° F
- Tubing: Use with copper
- Specifications Met: UL listed, except for metric fittings
Use these sleeves with compression nuts and fittings to create a strong seal on copper tubing. They are brass for good corrosion resistance. They are also known as ferrules.
For technical drawings and 3-D models, click on a part number.
Sleeves for Brass Compression Tube Fittings for Air and Water
- For Use With: Air, Lubricated Air, Water
- Temperature Range: See table
- Tubing: Use with firm or hard (Durometer 1A-95A or-Rockwell 15T 1-15T 60) nylon plastic, polyethylene plastic, polypropylene plastic or polyurethane rubber
- Specifications Met: SAE J512, except metric sizes
Use these sleeves with brass compression nuts and fittings to create a seal on plastic and rubber tubing.
Brass sleeves work best with nylon tubing. When using these sleeves with soft tubing such as polyethylene, polypropylene, and polyurethane tubing, you should use a tube support (not included).
For technical drawings and 3-D models, click on a part number.
For Tube | Sleeve | |||||
|---|---|---|---|---|---|---|
| OD | Wall Thick. | Material | Max. Pressure | Temp. Range, °F | Each | |
| 6mm | 1mm | Brass | 2100 psi @ 72° F | -75° to 550° | 0000000 | 00000 |