How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Sleeves for Compression Fittings for Stainless Steel Tubing
Use these sleeves with compression nuts and fittings to create a strong seal on stainless steel tubing. Sleeves are stainless steel for excellent corrosion resistance. They are also known as ferrules or rings.
- For Use With: Air, Hydraulic Fluid, Water
- Temperature Range: -420° to 1200° F
- Tubing: Use with seamless or welded 304 or 316 stainless steel that meets ASTM A269
- Specifications Met: SAE J514
Sleeves for 37° Flared Fittings for Stainless Steel Tubing
- For Use With: Air, Hydraulic Fluid, Isopropyl Alcohol, Natural Gas, Phosphoric Acid, Water
- Temperature Range: -420° to 1,200° F
- Tubing: Use with seamless or welded 304 or 316 stainless steel that meets ASTM A213, ASTM A249, or ASTM A269
- Specifications Met: ISO 8434, SAE J514
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°. Sleeves are 316 stainless steel for excellent corrosion resistance. They are also known as ferrules.
For Tube OD | |||
|---|---|---|---|
| Inch | Sleeve Material | Each | |
Inch | |||
| 5/16" | 316 Stainless Steel | 000000000 | 00000 |
Sleeves for Precision AN 37° Flared Fittings for Stainless Steel Tubing
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -320° to 1200° F
- Tubing: Use with seamless 304 or 316 stainless steel
- Specifications Met: See Table
Use these sleeves with precision AN nuts and fittings to provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°. They are also known as ferrules.
304 stainless steel sleeves have very good corrosion resistance. 316 stainless steel sleeves have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Sleeves for Compression Fittings for Copper Tubing
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range:
Inch: -65° to 200° F
Metric: -40° to 250° F - Tubing:
Inch: Use with firm or hard (Durometer 1A-95A) nylon plastic, polyethylene plastic, polypropylene plastic, polyurethane rubber, or copper
Metric: Use with copper - Specifications Met: UL listed, except for metric fittings
Use these sleeves with compression nuts and fittings to create a strong seal on copper tubing. They are brass for good corrosion resistance. They are also known as ferrules.
For Tube | ||||||
|---|---|---|---|---|---|---|
| OD | Wall Thick. | Sleeve Material | Max. Pressure | Pkg. Qty. | Pkg. | |
| 3/4" | 0.035" | Brass | 100 psi @ 72° F | 10 | 000000000 | 000000 |
Nuts for Compression Fittings for Copper Tubing
Use these nuts with compression sleeves and fittings to create a strong seal on copper tubing. They are brass for good corrosion resistance.
Nuts with a built-in sleeve (ferrule) help ensure the sleeve is positioned correctly for installation.
- For Use With: Air, Cutting Oil, Fuel Oil, Hydraulic Fluid, Mineral Oil, Water
- Temperature Range: -65° to 250° F
- Tubing: Use with copper
- Specifications Met: UL Listed
Sleeves for 37° Flared Fittings for Copper Tubing
- For Use With: Air, Fuel Oil, Mineral Oil, Water
- Temperature Range: -40° to 400° F
- Tubing: Use with seamless copper
- Specifications Met: MIL-F-18866, SAE J514, ISO 8434
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on copper tubing that is flared to 37°. Sleeves are brass for good corrosion resistance. They are also known as ferrules.
| For Tube OD | Sleeve Material | Each | |
| 5/16" | 360 Brass | 000000000 | 00000 |
Sleeves for 37° Flared Fittings for Steel Tubing
- For Use With: Air, Fuel Oil, Hydraulic Fluid, Mineral Oil
- Temp. Range: -60° to 400° F
- Tubing: Use with seamless steel
- Specifications Met: SAE J514
Use these sleeves with a nut and fitting to provide a tight metal-to-metal seal on steel tubing that is flared to 37°. Sleeves are zinc-plated steel for fair corrosion resistance. They are also known as ferrules.
For Tube OD | ||||
|---|---|---|---|---|
| Inch | Sleeve Material | Max. Pressure | Each | |
Inch Sleeves | ||||
| 5/16" | Zinc-Plated Steel | 4,000 psi @ 72° F | 000000000 | 00000 |
Nuts with Built-In Sleeve for Quick-Assembly Brass
Compression Tube Fittings for Air and Water
- Tubing: Use with firm or hard nylon plastic, polyethylene plastic or polypropylene plastic
- Temperature Range: 0° to 150° F
Use these nuts with quick-assembly brass compression fittings to create a seal on plastic tubing. They have a built-in sleeve (ferrule), so the sleeve is positioned correctly for installation. Thread the nut onto the fitting, then insert the tubing and tighten the nut. They have good corrosion resistance.
Sleeves for D.O.T. Brass Compression Tube Fittings for Air
- Tubing: Use with hard (Durometer 65D) nylon plastic
- Specifications Met: D.O.T. FMVSS 571
- Temperature Range: -40° to 200° F
Use these sleeves with D.O.T. brass compression nuts and fittings to create a seal on nylon tubing. They are brass for good corrosion resistance.
| For Tube OD | Sleeve Material | Max. Pressure | Pkg. Qty. | Pkg. | |
| 1/2" | Brass | 150 psi @ 72° F | 10 | 000000000 | 00000 |