McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    307 Products

    Hard Fiber Washers

    Image of Product. Front orientation. Washers. Hard Fiber Washers.
    The least likely to scratch or mar delicate mounting surfaces, these washers are made of hardened cotton fiber. They are also naturally nonconductive, so they are a great choice for insulating nuts and screws to prevent unintended charges. However, fiber washers will break down faster than other washers and will need to be replaced more often.
    For Screw
    Size
    ID
    OD
    Thk.
    Specs. Met
    Color
    Pkg.
    Qty.
    Pkg.
    No. 2
    		0.094"0.250"0.010" to 0.020"—Black100000000000000000
    No. 2
    		0.094"0.250"0.014" to 0.016"—Gray1000000000000000
    No. 2
    		0.094"0.250"0.028" to 0.034"—Red1000000000000000
    No. 4
    		0.125"0.250"0.014" to 0.016"—Gray1000000000000000
    No. 4
    		0.125"0.250"0.028" to 0.034"—Red1000000000000000
    No. 4
    		0.125"0.312"0.010" to 0.020"—Black10000000000000000
    No. 4
    		0.126"0.375"0.036" to 0.044"—Black1000000000000000
    No. 5
    		0.141"0.312"0.036" to 0.044"—Black1000000000000000
    No. 6
    		0.145"0.375"0.026" to 0.036"—Black10000000000000000
    No. 6
    		0.156"0.312"0.014" to 0.016"—Gray1000000000000000
    No. 6
    		0.156"0.312"0.028" to 0.034"—Red1000000000000000
    No. 8
    		0.172"0.375"0.026" to 0.036"—Black10000000000000000
    No. 8
    		0.188"0.375"0.014" to 0.016"—Gray1000000000000000
    No. 8
    		0.188"0.375"0.028" to 0.034"—Red1000000000000000
    No. 8
    		0.188"0.438"0.036" to 0.044"—Black100000000000000
    No. 10
    		0.203"0.375"0.042" to 0.052"—Black10000000000000000
    No. 10
    		0.203"0.438"0.041" to 0.051"—Black10000000000000000
    No. 10
    		0.203"0.500"0.036" to 0.044"—Black100000000000000
    No. 12
    		0.234"0.500"0.042" to 0.052"—Black500000000000000
    1/4"
    		0.250"0.375"0.014" to 0.016"—Gray1000000000000000
    1/4"
    		0.250"0.375"0.028" to 0.034"—Red1000000000000000
    1/4"
    		0.250"0.500"0.014" to 0.016"—Gray1000000000000000
    1/4"
    		0.250"0.500"0.028" to 0.034"—Red1000000000000000
    1/4"
    		0.281"0.625"0.057" to 0.067"ASME B18.21.1Black2500000000000000
    5/16"
    		0.312"0.438"0.014" to 0.016"—Gray1000000000000000
    5/16"
    		0.312"0.438"0.028" to 0.034"—Red1000000000000000
    5/16"
    		0.312"0.562"0.014" to 0.016"—Gray1000000000000000
    5/16"
    		0.312"0.562"0.028" to 0.034"—Red1000000000000000
    5/16"
    		0.325"0.688"0.057" to 0.067"—Black10000000000000000
    3/8"
    		0.375"0.500"0.014" to 0.016"—Gray1000000000000000
    3/8"
    		0.375"0.500"0.028" to 0.034"—Red1000000000000000
    3/8"
    		0.375"0.625"0.014" to 0.016"—Gray1000000000000000
    3/8"
    		0.375"0.625"0.028" to 0.034"—Red1000000000000000
    3/8"
    		0.375"2.250"0.120" to 0.130"—Gray1000000000000000
    3/8"
    		0.406"0.875"0.088" to 0.098"—Black2500000000000000
    7/16"
    		0.438"0.625"0.014" to 0.016"—Gray500000000000000
    7/16"
    		0.438"0.625"0.028" to 0.034"—Red1000000000000000
    1/2"
    		0.500"0.625"0.028" to 0.034"—Red1000000000000000
    1/2"
    		0.500"0.688"0.014" to 0.016"—Gray1000000000000000
    1/2"
    		0.500"0.688"0.028" to 0.034"—Red1000000000000000
    1/2"
    		0.500"0.750"0.014" to 0.016"—Gray1000000000000000
    1/2"
    		0.500"0.750"0.028" to 0.034"—Red1000000000000000
    1/2"
    		0.500"2.250"0.120" to 0.130"—Gray1000000000000000
    1/2"
    		0.531"1.000"0.088" to 0.098"—Black2500000000000000
    9/16"
    		0.562"0.812"0.014" to 0.016"—Gray10000000000000000
    9/16"
    		0.562"0.812"0.028" to 0.034"—Red1000000000000000
    5/8"
    		0.625"0.750"0.028" to 0.034"—Red1000000000000000
    5/8"
    		0.625"0.875"0.014" to 0.016"—Gray500000000000000
    5/8"
    		0.625"0.875"0.028" to 0.034"—Red1000000000000000
    5/8"
    		0.625"2.250"0.120" to 0.130"—Gray1000000000000000
    5/8"
    		0.645"1.063"0.088" to 0.098"—Black2500000000000000
    5/8"
    		0.656"1.312"0.086" to 0.100"—Black50000000000000
    5/8"
    		0.688"0.938"0.028" to 0.034"—Red1000000000000000
    3/4"
    		0.750"1.000"0.014" to 0.016"—Gray1000000000000000
    3/4"
    		0.750"1.000"0.028" to 0.034"—Red1000000000000000
    3/4"
    		0.750"1.063"0.028" to 0.034"—Red1000000000000000
    3/4"
    		0.750"2.250"0.110" to 0.140"—Gray1000000000000000
    3/4"
    		0.810"1.125"0.110" to 0.140"—Black1000000000000000
    3/4"
    		0.812"1.125"0.014" to 0.016"—Gray1000000000000000
    3/4"
    		0.812"1.125"0.028" to 0.034"—Red500000000000000
    7/8"
    		0.875"1.188"0.014" to 0.016"—Gray1000000000000000
    7/8"
    		0.875"1.188"0.028" to 0.034"—Red10000000000000000
    7/8"
    		0.875"2.250"0.120" to 0.130"—Gray1000000000000000
    7/8"
    		0.930"1.250"0.120" to 0.130"—Black1000000000000000
    7/8"
    		0.938"1.250"0.028" to 0.034"—Red500000000000000
    1"
    		1.000"1.250"0.014" to 0.016"—Gray1000000000000000
    1"
    		1.000"1.250"0.028" to 0.034"—Red10000000000000000
    1"
    		1.000"2.250"0.120" to 0.130"—Gray1000000000000000
    1"
    		1.031"1.312"0.014" to 0.016"—Gray5000000000000000
    1"
    		1.031"1.312"0.028" to 0.034"—Red500000000000000
    1"
    		1.125"2.000"0.120" to 0.130"—Black1000000000000000
    1 1/8"
    		1.188"1.562"0.028" to 0.034"—Red10000000000000000
    1 1/4"
    		1.250"1.625"0.028" to 0.034"—Red5000000000000000
    1 1/4"
    		1.312"2.125"0.120" to 0.130"—Black500000000000000
    M1.2
    		1.3 mm3.8 mm0.2 mm to 0.3 mmDIN 125Black1000000000000000
    M1.4
    		1.5 mm3.8 mm0.2 mm to 0.3 mmDIN 125Black1000000000000000
    M1.6
    		1.7 mm3.9 mm0.2 mm to 0.3 mmDIN 125Black1000000000000000
    M2
    		2.3 mm5 mm0.3 mm to 0.4 mmDIN 125Black2500000000000000
    M2.5
    		2.7 mm6.5 mm0.4 mm to 0.6 mmDIN 125Black10000000000000000
    M3
    		3.2 mm7 mm0.4 mm to 0.6 mmDIN 125Black10000000000000000
    M3.5
    		3.7 mm7.8 mm0.5 mm to 0.6 mmDIN 125Black1000000000000000
    M4
    		4.3 mm9 mm0.7 mm to 0.9 mmDIN 125Black10000000000000000
    M6
    		6.4 mm12.5 mm1.4 mm to 1.7 mmDIN 125Black500000000000000
    M7
    		7.4 mm13.8 mm1.4 mm to 1.7 mmDIN 125Black1000000000000000
    M8
    		8.4 mm17 mm1.4 mm to 1.7 mmDIN 125Black500000000000000
    M10
    		10.5 mm21 mm1.8 mm to 2.2 mmDIN 125Black5000000000000000
    M12
    		13 mm24 mm2.1 mm to 2.5 mmDIN 125Black5000000000000000
    M16
    		17 mm30 mm2.1 mm to 2.5 mmDIN 125Black250000000000000
    M20
    		21 mm37 mm2.1 mm to 2.5 mmDIN 125Black2500000000000000
    M24
    		25 mm44 mm2.8 mm to 3.5 mmDIN 125Black100000000000000
    M30
    		31 mm56 mm2.8 mm to 3.6 mmDIN 125Black1000000000000000

    Fiberglass Washers

    Image of Product. Front orientation. Washers. Fiberglass Washers.
    A lightweight alternative to stainless steel, these fiberglass washers have the best strength-to-weight ratio of all our nonmetal washers. Commonly used to distribute pressure under nuts and screws in building frames, they are a great fit when you need something more robust than plastic, but still have to stay within a certain weight limit.
    Temp.
    Range
    For Screw
    Size
    ID
    OD
    Thk.
    Min.
    Max.,
    ° F
    Mil. Spec.
    Color
    Pkg.
    Qty.
    Pkg.
    No. 0
    		0.062"0.188"0.012" to 0.018"Not Rated280MIL-I-24768/27Light Green1000000000000000
    No. 0
    		0.062"0.250"0.012" to 0.018"Not Rated280MIL-I-24768/27Light Green100000000000000
    No. 1
    		0.094"0.250"0.012" to 0.018"Not Rated280MIL-I-24768/27Light Green100000000000000
    No. 2
    		0.094"0.250"0.012" to 0.018"Not Rated280—Light Green100000000000000
    No. 3
    		0.105"0.250"0.024" to 0.038"Not Rated280MIL-I-24768/27Light Green100000000000000
    No. 4
    		0.122"0.219"0.012" to 0.018"Not Rated280—Light Green100000000000000
    No. 4
    		0.125"0.310"0.024" to 0.038"Not Rated280—Light Green100000000000000
    No. 4
    		0.125"0.317"0.054" to 0.070"Not Rated280—Light Green1000000000000000
    No. 4
    		0.125"0.438"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green100000000000000
    No. 5
    		0.140"0.375"0.024" to 0.038"Not Rated280MIL-I-24768/27Light Green100000000000000
    No. 5
    		0.140"0.438"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green100000000000000
    No. 6
    		0.142"0.500"0.054" to 0.070"Not Rated280—Light Green100000000000000
    No. 6
    		0.156"0.375"0.024" to 0.038"Not Rated280MIL-I-24768/27Light Green100000000000000
    No. 6
    		0.156"0.438"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green100000000000000
    No. 8
    		0.175"0.380"0.024" to 0.038"Not Rated280—Light Green100000000000000
    No. 8
    		0.178"0.562"0.054" to 0.070"Not Rated280—Light Green100000000000000
    No. 8
    		0.188"0.500"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green1000000000000000
    No. 10
    		0.203"0.443"0.054" to 0.070"Not Rated280—Light Green100000000000000
    No. 10
    		0.203"0.562"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green1000000000000000
    No. 12
    		0.234"0.625"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green100000000000000
    1/4"
    		0.250"0.500"0.024" to 0.038"Not Rated280—Light Green100000000000000
    1/4"
    		0.250"2.000"0.108" to 0.142"Not Rated280—Light Green10000000000000
    1/4"
    		0.265"0.625"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green1000000000000000
    1/4"
    		0.265"1.000"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green1000000000000000
    5/16"
    		0.312"0.562"0.054" to 0.070"Not Rated280—Light Green100000000000000
    5/16"
    		0.344"0.688"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green1000000000000000
    3/8"
    		0.375"2.000"0.108" to 0.142"Not Rated280—Light Green10000000000000
    3/8"
    		0.380"0.750"0.054" to 0.070"Not Rated280—Light Green1000000000000000
    3/8"
    		0.390"0.625"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green1000000000000000
    3/8"
    		0.406"0.812"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green1000000000000000
    3/8"
    		0.406"1.000"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green1000000000000000
    3/8"
    		0.406"1.250"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green500000000000000
    3/8"
    		0.411"0.625"0.056" to 0.071"Not Rated280MIL-I-24768/27Light Green50000000000000
    7/16"
    		0.458"0.750"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green1000000000000000
    7/16"
    		0.458"0.875"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green1000000000000000
    7/16"
    		0.458"1.000"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green1000000000000000
    1/2"
    		0.500"2.000"0.108" to 0.142"Not Rated280—Light Green10000000000000
    1/2"
    		0.515"0.880"0.054" to 0.070"Not Rated280—Light Green100000000000000
    1/2"
    		0.536"1.000"0.056" to 0.071"Not Rated280MIL-I-24768/27Light Green50000000000000
    1/2"
    		0.562"1.000"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green1000000000000000
    1/2"
    		0.562"1.250"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green500000000000000
    1/2"
    		0.562"1.750"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green10000000000000
    9/16"
    		0.594"1.062"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green500000000000000
    9/16"
    		0.594"1.500"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green10000000000000
    5/8"
    		0.625"2.000"0.108" to 0.142"Not Rated280—Light Green10000000000000
    5/8"
    		0.640"1.193"0.083" to 0.103"Not Rated280—Light Green500000000000000
    5/8"
    		0.656"1.312"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green10000000000000
    5/8"
    		0.656"1.750"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green10000000000000
    3/4"
    		0.765"1.317"0.083" to 0.103"Not Rated280—Light Green500000000000000
    3/4"
    		0.812"1.500"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green10000000000000
    3/4"
    		0.812"2.000"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green10000000000000
    7/8"
    		0.890"1.500"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green10000000000000
    7/8"
    		0.890"2.000"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green10000000000000
    1"
    		1.015"1.755"0.083" to 0.103"Not Rated280—Light Green500000000000000
    1"
    		1.062"1.750"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green10000000000000
    1"
    		1.062"2.000"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green10000000000000
    1"
    		1.062"2.500"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green10000000000000
    1 1/8"
    		1.140"2.000"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green10000000000000
    1 1/8"
    		1.140"2.500"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green10000000000000
    1 1/4"
    		1.328"2.000"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green10000000000000
    1 1/4"
    		1.328"2.500"0.054" to 0.070"Not Rated280MIL-I-24768/27Light Green10000000000000
    M1
    		1.1 mm3.2 mm0.3 mm to 0.5 mmNot Rated280—Light Green500000000000000
    M1.6
    		1.7 mm4.0 mm0.3 mm to 0.5 mmNot Rated280—Light Green500000000000000
    M2
    		2.2 mm5.0 mm0.7 mm to 0.9 mmNot Rated280—Light Green1000000000000000
    M2.5
    		2.7 mm5.0 mm0.3 mm to 0.5 mmNot Rated280—Light Green1000000000000000
    M3
    		3.2 mm6.0 mm0.6 mm to 0.9 mmNot Rated280—Light Green1000000000000000
    M4
    		4.3 mm9.0 mm0.7 mm to 0.9 mmNot Rated280—Clear1000000000000000
    M5
    		5.3 mm11.0 mm0.9 mm to 1.1 mmNot Rated280—Clear1000000000000000
    M6
    		6.4 mm12.0 mm1.4 mm to 1.7 mmNot Rated280—Light Green1000000000000000
    M8
    		8.4 mm15.0 mm1.4 mm to 1.8 mmNot Rated280—Light Green50000000000000
    M10
    		10.5 mm18.0 mm1.4 mm to 1.8 mmNot Rated280—Light Green50000000000000
    M12
    		13.0 mm20.0 mm1.4 mm to 1.8 mmNot Rated280—Light Green50000000000000
    M14
    		15.0 mm24.0 mm1.4 mm to 1.8 mmNot Rated280—Light Green500000000000000
    M16
    		17.0 mm28.0 mm1.4 mm to 1.8 mmNot Rated280—Light Green500000000000000
    M20
    		21.0 mm34.0 mm1.4 mm to 1.8 mmNot Rated280—Light Green500000000000000
    M30
    		31.0 mm56.0 mm1.4 mm to 1.8 mmNot Rated280—Light Green500000000000000
    M39
    		40.0 mm72.0 mm1.4 mm to 1.8 mmNot Rated280—Light Green10000000000000

    Sealing Washers

    Prevent leaks while distributing weight evenly under nuts and screws. These washers compress as you tighten to keep air and fluid in, and dust and contaminants out. Use them anywhere you need a tight seal, such as protecting electronics from moisture or keeping lubricants contained in machinery.
    Rubber
    Image of Product. Front orientation. Sealing Washers. Rubber.
    Resist leaks better than metal sealing washers, but are more susceptible to wear and tear. Reuse these washers a handful of times, as long as the material isn't damaged.
    Oil-Resistant Aramid-Reinforced Buna-N—These washers are embedded with aramid, which is the same material used in bulletproof vests. This addition makes them stronger and more heat resistant than standard Buna-N washers for a longer lifespan. They won't degrade when exposed to oil, grease, and fuel.
    Temp.
    Range, ° F
    For Screw
    Size
    ID
    OD
    Thk.
    Min.
    Max.
    Color
    Pkg.
    Qty.
    Pkg.
    Oil-Resistant Aramid-Reinforced Buna-N
    No. 4
    		0.125"0.375"0.026" to 0.036"0450Green50000000000000000
    No. 6
    		0.156"0.438"0.026" to 0.036"0450Green5000000000000000
    No. 8
    		0.188"0.500"0.026" to 0.036"0450Green5000000000000000
    No. 10
    		0.203"0.750"0.021" to 0.041"0450Green5000000000000000
    1/4"
    		0.250"0.500"0.054" to 0.070"-20460Green1000000000000000
    1/4"
    		0.250"0.625"0.054" to 0.070"-20460Green1000000000000000
    5/16"
    		0.312"0.625"0.054" to 0.070"-20460Green1000000000000000
    5/16"
    		0.312"0.750"0.054" to 0.070"-20460Green1000000000000000
    3/8"
    		0.375"0.625"0.054" to 0.070"-20460Green1000000000000000
    3/8"
    		0.375"0.750"0.054" to 0.070"-20460Green1000000000000000
    7/16"
    		0.469"1.125"0.052" to 0.072"0450Green2500000000000000
    1/2"
    		0.500"0.875"0.054" to 0.070"-20460Green50000000000000
    1/2"
    		0.500"1.000"0.054" to 0.070"-20460Green500000000000000
    5/8"
    		0.625"1.000"0.054" to 0.070"-20460Green500000000000000
    5/8"
    		0.625"1.500"0.054" to 0.070"-20460Green500000000000000
    3/4"
    		0.750"1.500"0.054" to 0.070"-20460Green500000000000000
    3/4"
    		0.750"2.000"0.054" to 0.070"-20460Green500000000000000
    7/8"
    		0.938"2.250"0.115" to 0.135"0450Green500000000000000
    1"
    		1.000"1.500"0.054" to 0.070"-20460Green500000000000000
    1"
    		1.000"2.000"0.054" to 0.070"-20460Green500000000000000
    1 1/4"
    		1.312"3.000"0.115" to 0.135"0450Green10000000000000
     
    Hard Fiber
    Image of Product. Front orientation. Sealing Washers. Hard Fiber.
    An economical alternative to metal crush washers, these compress easily to create a seal with less effort. However, fiber washers degrade faster than metal washers and aren't as heat resistant. They also don't seal quite as tightly as their plastic or rubber counterparts. These washers are reusable, as long as the material isn't damaged.
    For Screw
    Size
    ID,
    mm
    OD,
    mm
    Thk.,
    mm
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Hard Fiber
    M5
    		580.8DIN 760310000000000000000
    M5
    		5100.8DIN 76031000000000000000
    M6
    		690.8DIN 76031000000000000000
    M6
    		6100.8DIN 76031000000000000000
    M8
    		8120.8DIN 76031000000000000000
    M8
    		8140.8DIN 76031000000000000000
    M10
    		10140.8DIN 76031000000000000000
    M10
    		10161DIN 76031000000000000000
    M12
    		12160.8DIN 76031000000000000000
    M12
    		12181DIN 76031000000000000000
    M12
    		12200.8DIN 76031000000000000000
    M12
    		12240.8DIN 76031000000000000000
    M14
    		14181DIN 76031000000000000000
    M14
    		14240.8DIN 76031000000000000000
    M16
    		16210.8DIN 76031000000000000000
    M18
    		18220.8DIN 76031000000000000000
    M18
    		18240.8DIN 76031000000000000000
    M22
    		22270.8DIN 76031000000000000000
     

    Abrasion-Resistant Cushioning Washers

    Image of Product. Front orientation. Cushioning Washers. Abrasion-Resistant Cushioning Washers.
    These SBR rubber washers are reinforced with cloth fibers to resist wear from rubbing and scraping surfaces. Use them to cushion joints and dampen vibration.
    For Screw
    Size
    ID
    OD
    Thk.
    Min.
    Temp.
    Max. Temp.,
    ° F
    Hardness
    Color
    Pkg.
    Qty.
    Pkg.
    Polyester Fiber-Filled SBR Rubber
    No. 10
    		0.188"0.562"0.110" to 0.140"Not Rated170Durometer 70ABlack1000000000000000
    No. 10
    		0.203"0.406"0.047" to 0.077"Not Rated170Durometer 70ABlack500000000000000
    No. 12
    		0.234"0.625"0.047" to 0.077"Not Rated170Durometer 70ABlack500000000000000
    1/4"
    		0.250"0.750"0.110" to 0.140"Not Rated170Durometer 70ABlack100000000000000
    1/4"
    		0.250"1.000"0.110" to 0.140"Not Rated170Durometer 70ABlack100000000000000
    1/4"
    		0.281"0.375"0.047" to 0.077"Not Rated170Durometer 70ABlack500000000000000
    1/4"
    		0.281"0.500"0.047" to 0.077"Not Rated170Durometer 70ABlack500000000000000
    1/4"
    		0.281"0.625"0.047" to 0.077"Not Rated170Durometer 70ABlack500000000000000
    1/4"
    		0.281"0.734"0.047" to 0.077"Not Rated170Durometer 70ABlack500000000000000
    1/4"
    		0.281"1.500"0.047" to 0.077"Not Rated170Durometer 70ABlack250000000000000
    5/16"
    		0.344"0.625"0.047" to 0.077"Not Rated170Durometer 70ABlack500000000000000
    5/16"
    		0.344"0.688"0.047" to 0.077"Not Rated170Durometer 70ABlack500000000000000
    5/16"
    		0.344"0.875"0.047" to 0.077"Not Rated170Durometer 70ABlack500000000000000
    5/16"
    		0.344"1.125"0.047" to 0.077"Not Rated170Durometer 70ABlack5000000000000000
    5/16"
    		0.348"1.500"0.047" to 0.077"Not Rated170Durometer 70ABlack250000000000000
    5/16"
    		0.406"0.875"0.047" to 0.077"Not Rated170Durometer 70ABlack500000000000000
    5/16"
    		0.406"1.250"0.047" to 0.077"Not Rated170Durometer 70ABlack5000000000000000
    3/8"
    		0.375"1.000"0.110" to 0.140"Not Rated170Durometer 70ABlack100000000000000
    3/8"
    		0.375"1.500"0.110" to 0.140"Not Rated170Durometer 70ABlack100000000000000
    3/8"
    		0.375"2.250"0.110" to 0.140"Not Rated170Durometer 70ABlack100000000000000
    3/8"
    		0.406"0.625"0.047" to 0.077"Not Rated170Durometer 70ABlack500000000000000
    3/8"
    		0.406"0.734"0.047" to 0.077"Not Rated170Durometer 70ABlack500000000000000
    3/8"
    		0.406"0.812"0.047" to 0.077"Not Rated170Durometer 70ABlack500000000000000
    3/8"
    		0.406"1.250"0.047" to 0.077"Not Rated170Durometer 70ABlack5000000000000000
    3/8"
    		0.406"2.000"0.047" to 0.077"Not Rated170Durometer 70ABlack100000000000000
    3/8"
    		0.406"3.000"0.047" to 0.077"Not Rated170Durometer 70ABlack1000000000000000
    7/16"
    		0.469"1.250"0.047" to 0.077"Not Rated170Durometer 70ABlack5000000000000000
    7/16"
    		0.469"1.469"0.047" to 0.077"Not Rated170Durometer 70ABlack250000000000000
    1/2"
    		0.500"1.375"0.110" to 0.140"Not Rated170Durometer 70ABlack100000000000000
    1/2"
    		0.500"2.250"0.110" to 0.140"Not Rated170Durometer 70ABlack100000000000000
    1/2"
    		0.500"3.000"0.110" to 0.140"Not Rated170Durometer 70ABlack50000000000000
    1/2"
    		0.505"0.750"0.047" to 0.077"Not Rated170Durometer 70ABlack500000000000000
    1/2"
    		0.531"1.000"0.047" to 0.077"Not Rated170Durometer 70ABlack5000000000000000
    1/2"
    		0.531"1.250"0.047" to 0.077"Not Rated170Durometer 70ABlack2500000000000000
    1/2"
    		0.531"1.500"0.078" to 0.108"Not Rated170Durometer 70ABlack2500000000000000
    1/2"
    		0.531"1.750"0.078" to 0.108"Not Rated170Durometer 70ABlack1000000000000000
    9/16"
    		0.594"1.469"0.078" to 0.108"Not Rated170Durometer 70ABlack250000000000000
    5/8"
    		0.625"1.750"0.110" to 0.140"Not Rated170Durometer 70ABlack100000000000000
    5/8"
    		0.625"2.250"0.110" to 0.140"Not Rated170Durometer 70ABlack100000000000000
    5/8"
    		0.625"3.000"0.110" to 0.140"Not Rated170Durometer 70ABlack50000000000000
    5/8"
    		0.650"0.938"0.047" to 0.077"Not Rated170Durometer 70ABlack500000000000000
    5/8"
    		0.656"1.312"0.078" to 0.108"Not Rated170Durometer 70ABlack2500000000000000
    5/8"
    		0.688"2.000"0.105" to 0.145"Not Rated170Durometer 70ABlack1000000000000000
    3/4"
    		0.750"2.000"0.110" to 0.140"Not Rated170Durometer 70ABlack100000000000000
    3/4"
    		0.750"2.250"0.110" to 0.140"Not Rated170Durometer 70ABlack100000000000000
    3/4"
    		0.750"3.000"0.110" to 0.140"Not Rated170Durometer 70ABlack50000000000000
    3/4"
    		0.770"1.125"0.047" to 0.077"Not Rated170Durometer 70ABlack5000000000000000
    3/4"
    		0.812"1.469"0.105" to 0.145"Not Rated170Durometer 70ABlack250000000000000
    3/4"
    		0.812"2.500"0.078" to 0.108"Not Rated170Durometer 70ABlack1000000000000000
    7/8"
    		0.875"2.250"0.110" to 0.140"Not Rated170Durometer 70ABlack100000000000000
    7/8"
    		0.875"3.000"0.110" to 0.140"Not Rated170Durometer 70ABlack50000000000000
    7/8"
    		0.938"1.750"0.105" to 0.145"Not Rated170Durometer 70ABlack2500000000000000
    1"
    		1.000"2.250"0.110" to 0.140"Not Rated170Durometer 70ABlack100000000000000
    1"
    		1.000"2.500"0.110" to 0.140"Not Rated170Durometer 70ABlack1000000000000000
    1"
    		1.000"3.000"0.110" to 0.140"Not Rated170Durometer 70ABlack50000000000000
    1"
    		1.062"1.370"0.105" to 0.145"Not Rated170Durometer 70ABlack250000000000000
    1"
    		1.062"2.500"0.105" to 0.145"Not Rated170Durometer 70ABlack1000000000000000
    1 1/8"
    		1.188"1.500"0.105" to 0.145"Not Rated170Durometer 70ABlack2500000000000000
    1 1/8"
    		1.250"2.750"0.156" to 0.218"Not Rated170Durometer 70ABlack500000000000000
    1 1/4"
    		1.312"1.910"0.105" to 0.145"Not Rated170Durometer 70ABlack1000000000000000
    1 1/4"
    		1.312"3.000"0.105" to 0.145"Not Rated170Durometer 70ABlack500000000000000
    1 1/4"
    		1.375"2.500"0.156" to 0.218"Not Rated170Durometer 70ABlack500000000000000
    1 1/4"
    		1.375"3.000"0.105" to 0.145"Not Rated170Durometer 70ABlack500000000000000
    1 3/8"
    		1.438"2.500"0.105" to 0.145"Not Rated170Durometer 70ABlack1000000000000000
    1 3/8"
    		1.500"3.250"0.156" to 0.218"Not Rated170Durometer 70ABlack20000000000000
    1 1/2"
    		1.500"2.500"0.110" to 0.140"Not Rated170Durometer 70ABlack50000000000000
    1 1/2"
    		1.500"3.000"0.110" to 0.140"Not Rated170Durometer 70ABlack50000000000000
    1 1/2"
    		1.625"3.500"0.156" to 0.218"Not Rated170Durometer 70ABlack20000000000000
    1 3/4"
    		1.875"3.250"0.105" to 0.145"Not Rated170Durometer 70ABlack500000000000000
    1 3/4"
    		1.875"4.000"0.156" to 0.218"Not Rated170Durometer 70ABlack10000000000000
    2"
    		2.125"3.750"0.219" to 0.281"Not Rated170Durometer 70ABlack100000000000000
    2"
    		2.125"4.500"0.156" to 0.218"Not Rated170Durometer 70ABlack10000000000000
     

    Wool Cushioning Washers

    Image of Product. Front orientation. Cushioning Washers. Wool Cushioning Washers.
    These wool felt washers can be soaked with oil to lubricate joints. Use them to cushion joints and dampen vibration.
    For Screw
    Size
    ID
    OD
    Thk.
    Min. Temp.,
    ° F
    Max. Temp.,
    ° F
    Hardness
    Color
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Wool Felt
    No. 8
    		0.156"0.292"0.175" to 0.201"-80200Durometer 30AGraySAE J31450000000000000000
    No. 10
    		0.190"0.375"0.175" to 0.201"-80200Durometer 30AGraySAE J3145000000000000000
    No. 10
    		0.190"0.562"0.236" to 0.264"-80200Durometer 30AGraySAE J3145000000000000000
    No. 12
    		0.216"0.438"0.236" to 0.264"-80200Durometer 30AGraySAE J3145000000000000000
    1/4"
    		0.250"0.500"0.236" to 0.264"-80200Durometer 30AGraySAE J3145000000000000000
    1/4"
    		0.250"0.750"0.230" to 0.270"-80200Durometer 30AGray—2500000000000000
    1/4"
    		0.250"1.000"0.481" to 0.519"-80200Durometer 30AGray—100000000000000
    5/16"
    		0.312"0.562"0.236" to 0.264"-80200Durometer 30AGraySAE J314500000000000000
    3/8"
    		0.375"0.625"0.236" to 0.264"-80200Durometer 30AGraySAE J3145000000000000000
    3/8"
    		0.375"1.000"0.230" to 0.270"-80200Durometer 30AGray—2500000000000000
    3/8"
    		0.375"1.500"0.236" to 0.264"-80200Durometer 30AGraySAE J3142500000000000000
    3/8"
    		0.406"0.734"0.055" to 0.069"-80200Durometer 20AGraySAE J3141000000000000000
    1/2"
    		0.500"1.000"0.236" to 0.264"-80200Durometer 30AGraySAE J314250000000000000
    1/2"
    		0.500"1.250"0.230" to 0.270"-80200Durometer 30AGray—2500000000000000
    1/2"
    		0.500"1.375"0.236" to 0.264"-80200Durometer 30AGraySAE J3142500000000000000
    1/2"
    		0.500"1.500"0.230" to 0.270"-80200Durometer 30AGray—1000000000000000
    1/2"
    		0.505"0.750"0.055" to 0.069"-80200Durometer 20AGraySAE J3141000000000000000
    5/8"
    		0.625"1.750"0.236" to 0.264"-80200Durometer 30AGraySAE J3141500000000000000
    3/4"
    		0.750"1.250"0.230" to 0.270"-80200Durometer 30AGray—2500000000000000
    3/4"
    		0.750"2.000"0.236" to 0.264"-80200Durometer 30AGraySAE J3141500000000000000
    3/4"
    		0.812"1.469"0.113" to 0.137"-80200Durometer 30AGraySAE J3141500000000000000
    7/8"
    		0.875"2.250"0.236" to 0.264"-80200Durometer 30AGraySAE J3141000000000000000
    1"
    		1.000"2.000"0.475" to 0.525"-80200Durometer 30AGray—500000000000000
    1"
    		1.000"2.500"0.236" to 0.264"-80200Durometer 30AGraySAE J3141000000000000000
    1"
    		1.000"2.500"0.481" to 0.519"-80200Durometer 30AGraySAE J31450000000000000
    1 1/4"
    		1.250"3.000"0.481" to 0.519"-80200Durometer 30AGraySAE J314500000000000000
    1 1/2"
    		1.500"2.500"0.481" to 0.519"-80200Durometer 30AGraySAE J31450000000000000
    1 1/2"
    		1.500"3.000"0.481" to 0.519"-80200Durometer 30AGraySAE J314500000000000000
     
    back to top