McMaster-Carr logo
    Filter by
    Bearing Material
    System of Measurement
    Lubrication
    Plain Bearing Type
    Backing Material
    Bearing Type
    Shaft Mount Type
    For Load Direction
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    136 Products
    About Sleeve Bearings
    industrial info icon

    Choose a sleeve bearing that matches your load and speed requirements and that's right for your environment.

    Dry-Running Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Dry-Running Sleeve Bearings.
    Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    Extreme-Load Ultra-Chemical-Resistant Fiberglass-Backed PTFE—Our strongest PTFE bearings. They’re ideal for heavy loads thanks to a backing layer made of fiberglass. The PTFE core is unaffected by the harsh fluids that other plastics can't handle, including all strong acids and bases.
    Each
    For Shaft
    Dia.
    For Housing
    ID
    Lg.
    Dynamic Radial Load
    Cap. @ Speed
    Color
    Temp. Range,
    ° F
    1-24
    25-99
    100-Up
    Extreme-Load Ultra-Chemical-Resistant Fiberglass-Backed PTFE
    1/2"5/8"1/2"1,250 lb. @ 120 rpmGray-55 to 2806365K401000000000000000
    1/2"5/8"1"2,500 lb. @ 120 rpmGray-55 to 2806365K402000000000000
    1/2"3/4"3/4"1,850 lb. @ 120 rpmGray-55 to 2806365K403000000000000
    1/2"3/4"1"2,500 lb. @ 120 rpmGray-55 to 2806365K404000000000000
    5/8"7/8"3/4"3,750 lb. @ 60 rpmGray-55 to 2806365K405000000000000
    5/8"7/8"1"5,050 lb. @ 60 rpmGray-55 to 2806365K406000000000000
    3/4"7/8"3/4"3,750 lb. @ 60 rpmGray-55 to 2806365K407000000000000
    3/4"7/8"1 1/4"6,300 lb. @ 60 rpmGray-55 to 2806365K408000000000000
    3/4"1"1"5,050 lb. @ 60 rpmGray-55 to 2806365K409000000000000
    1"1 1/4"1"5,050 lb. @ 60 rpmGray-55 to 2806365K410000000000000
    1"1 1/4"1 1/2"7,550 lb. @ 60 rpmGray-55 to 2806365K411000000000000000
    1"1 1/4"2"10,100 lb. @ 60 rpmGray-55 to 2806365K412000000000000000
    1 1/4"1 1/2"2"20,200 lb. @ 30 rpmGray-55 to 2806365K413000000000000000
    1 1/4"1 1/2"3"30,350 lb. @ 30 rpmGray-55 to 2806365K414000000000000000
    1 1/2"1 3/4"2"20,200 lb. @ 30 rpmGray-55 to 2806365K415000000000000000
    2"2 1/4"1 1/2"15,150 lb. @ 30 rpmGray-55 to 2806365K416000000000000000
    2"2 1/4"3"30,350 lb. @ 30 rpmGray-55 to 2806365K417000000000000000
     

    Electrical-Insulating Unthreaded Spacers

    Image of Product. Front orientation. Spacers. Electrical-Insulating Unthreaded Spacers.
    Stop electrical current in its tracks—these nonconductive spacers prevent it from passing through your components. They’re often used to insulate circuit boards and enclosures.
    Garolite—Made of a fiberglass-reinforced epoxy laminate, these spacers combine high strength with low moisture absorption.
    Lg.
    For Screw
    Size
    ID
    Dielectric Strength,
    V/mil
    Temp. Range,
    ° F
    Pkg.
    Qty.
    Pkg.
    Garolite
     
    3/16" OD
    3/16"No. 4
    		0.115"4000 to 300192273A00300000
    1/4"No. 4
    		0.115"4000 to 300192273A0050000
    5/16"No. 4
    		0.115"4000 to 300192273A0070000
    3/8"No. 4
    		0.115"4000 to 300192273A0090000
    1/2"No. 4
    		0.115"4000 to 300192273A0110000
     
    1/4" OD
    3/16"No. 4
    		0.115"4000 to 300192273A0230000
    3/16"No. 6
    		0.140"4000 to 300192273A0430000
    1/4"No. 4
    		0.115"4000 to 300192273A0250000
    1/4"No. 6
    		0.140"4000 to 300192273A0450000
    5/16"No. 4
    		0.115"4000 to 300192273A0270000
    5/16"No. 6
    		0.140"4000 to 300192273A0470000
    3/8"No. 4
    		0.115"4000 to 300192273A0290000
    3/8"No. 6
    		0.140"4000 to 300192273A0490000
    1/2"No. 4
    		0.115"4000 to 300192273A0310000
    1/2"No. 6
    		0.140"4000 to 300192273A0510000
    1/2"No. 8
    		0.167"4000 to 300192273A1150000
    3/4"No. 6
    		0.140"4000 to 300192273A1130000
    3/4"No. 8
    		0.167"4000 to 300192273A1160000
    1"No. 6
    		0.140"4000 to 300192273A11400000
    1"No. 8
    		0.167"4000 to 300192273A11700000
     
    5/16" OD
    3/16"No. 10
    		0.192"4000 to 300192273A0630000
    1/4"No. 10
    		0.192"4000 to 300192273A0650000
    5/16"No. 10
    		0.192"4000 to 300192273A0670000
    3/8"No. 10
    		0.192"4000 to 300192273A0690000
    1/2"No. 10
    		0.192"4000 to 300192273A0710000
     
    3/8" OD
    1/4"No. 10
    		0.192"4000 to 300192273A0830000
    3/8"No. 10
    		0.192"4000 to 300192273A0850000
    1/2"No. 10
    		0.192"4000 to 300192273A0870000
    3/4"No. 10
    		0.192"4000 to 300192273A0890000
    1"No. 10
    		0.192"4000 to 300192273A09100000
    1 1/2"No. 10
    		0.192"4000 to 300192273A09400000
     
    1/2" OD
    3/16"No. 10
    		0.192"4000 to 300192273A1020000
    3/16"1/4"
    		0.260"4000 to 300192273A1220000
    1/4"No. 10
    		0.192"4000 to 300192273A1040000
    1/4"1/4"
    		0.260"4000 to 300192273A1240000
    5/16"1/4"
    		0.260"4000 to 300192273A1260000
    3/8"No. 10
    		0.192"4000 to 300192273A1060000
    3/8"1/4"
    		0.260"4000 to 300192273A1280000
    1/2"No. 10
    		0.192"4000 to 300192273A1080000
    1/2"1/4"
    		0.260"4000 to 300192273A1320000
    5/8"1/4"
    		0.260"4000 to 300192273A1340000
    3/4"No. 10
    		0.192"4000 to 300192273A1100000
    3/4"1/4"
    		0.260"4000 to 300192273A1360000
    7/8"1/4"
    		0.260"4000 to 300192273A1380000
    1"No. 10
    		0.192"4000 to 300192273A1120000
    1"1/4"
    		0.260"4000 to 300192273A14000000
    1 1/2"1/4"
    		0.260"4000 to 300192273A14200000
    1 3/4"1/4"
    		0.260"4000 to 300192273A14400000
    2"1/4"
    		0.260"4000 to 300192273A14600000
     
    3/4" OD
    1/2"1/4"
    		0.260"4000 to 300192273A1520000
    1/2"5/16"
    		0.325"4000 to 300192273A1720000
    1/2"3/8"
    		0.385"4000 to 300192273A1920000
    3/4"1/4"
    		0.260"4000 to 300192273A15400000
    3/4"5/16"
    		0.325"4000 to 300192273A1740000
    3/4"3/8"
    		0.385"4000 to 300192273A1940000
    1"1/4"
    		0.260"4000 to 300192273A15600000
    1"5/16"
    		0.325"4000 to 300192273A17600000
    1"3/8"
    		0.385"4000 to 300192273A19600000
    1 1/2"5/16"
    		0.325"4000 to 300192273A17800000
    1 1/2"3/8"
    		0.385"4000 to 300192273A19800000
    1 3/4"1/4"
    		0.260"4000 to 300192273A15800000
    1 3/4"5/16"
    		0.325"4000 to 300192273A18000000
    1 3/4"3/8"
    		0.385"4000 to 300192273A20100000
    2"1/4"
    		0.260"4000 to 300192273A16000000
    2"5/16"
    		0.325"4000 to 300192273A18200000
    2"3/8"
    		0.385"4000 to 300192273A20400000
    2 1/2"3/8"
    		0.385"4000 to 300192273A20700000
    2 3/4"3/8"
    		0.385"4000 to 300192273A20900000
    3"3/8"
    		0.385"4000 to 300192273A21200000
     
    1" OD
    1/2"1/2"
    		0.510"4000 to 300192273A2220000
    3/4"1/2"
    		0.510"4000 to 300192273A22400000
    1"1/2"
    		0.510"4000 to 300192273A22600000
    1 1/2"1/2"
    		0.510"4000 to 300192273A22800000
    1 3/4"1/2"
    		0.510"4000 to 300192273A23000000
    2"1/2"
    		0.510"4000 to 300192273A23300000
    2 1/2"1/2"
    		0.510"4000 to 300192273A23600000
    2 3/4"1/2"
    		0.510"4000 to 300192273A23900000
    3"1/2"
    		0.510"4000 to 300192273A24200000
     

    Electrical-Insulating Female Threaded Standoffs

    Our best electrically insulating standoffs. They prevent electrical currents from passing through enclosures and conductive surfaces. These standoffs are often installed in circuit-breaker housings and semiconductors.
    Hex
    Image of Product. Front orientation. Standoffs. Electrical-Insulating Female Threaded Standoffs, Hex.
    Image of Attribute. Front orientation. Contains Annotated. Standoffs. Electrical-Insulating Female Threaded Standoffs, Hex.
    Image of Attribute. Threaded on Both Ends. Front orientation. Threaded on Both Ends. Electrical-Insulating Female Threaded Standoffs, Hex.

    Threaded on

    Both Ends

    High-Strength Fiberglass-Reinforced Plastic—A lightweight alternative to stainless steel, these have the best strength-to-weight ratio of all our nonmetal standoffs.
    Lg.
    Hex
    Size
    Threading
    Min. Thread
    Lg.
    Dielectric Strength,
    V/mil
    Voltage
    Rating, V
    Temp. Range,
    ° F
    Each
    High-Strength Fiberglass-Reinforced Plastic
     
    1/4"-20
    1"1"Threaded on Both Ends5/16"3501,000-20 to 2483314A800000
    1 1/4"1"Threaded on Both Ends5/16"350600—3314A50000
     
    Round
    Image of Product. Front orientation. Standoffs. Electrical-Insulating Female Threaded Standoffs, Round.
    Image of Attribute. Threaded on Both Ends. Front orientation. Threaded on Both Ends. Electrical-Insulating Female Threaded Standoffs, Round.

    Threaded on

    Both Ends

    High-Strength Fiberglass-Reinforced Plastic—A lightweight alternative to stainless steel, these have the best strength-to-weight ratio of all our nonmetal standoffs.
    Lg.
    OD
    Threading
    Min. Thread
    Lg.
    Dielectric Strength,
    V/mil
    Voltage
    Rating, V
    Temp. Range,
    ° F
    Each
    High-Strength Fiberglass-Reinforced Plastic
     
    3/8"-16
    1 3/8"1 3/4"Threaded on Both Ends3/8"3501,500—3314A200000
    1 3/4"2"Threaded on Both Ends3/8"3502,000-40 to 2663314A300000
    2"2"Threaded on Both Ends9/16"3502,300-40 to 2663314A10000
    2 1/4"1 3/4"Threaded on Both Ends9/16"3502,700—3314A60000
     
    Octagon
    Image of Product. Front orientation. Standoffs. Electrical-Insulating Female Threaded Standoffs, Octagon.
    Image of Attribute. Front orientation. Contains Annotated. Standoffs. Electrical-Insulating Female Threaded Standoffs, Octagon.
    Image of Attribute. Threaded on Both Ends. Front orientation. Threaded on Both Ends. Electrical-Insulating Female Threaded Standoffs, Octagon.

    Threaded on

    Both Ends

    High-Strength Fiberglass-Reinforced Plastic—A lightweight alternative to stainless steel, these have the best strength-to-weight ratio of all our nonmetal standoffs.
    Lg.
    Hex
    Size
    Threading
    Min. Thread
    Lg.
    Dielectric Strength,
    V/mil
    Voltage
    Rating, V
    Each
    High-Strength Fiberglass-Reinforced Plastic
     
    1/2"-13
    3"2 1/2"Threaded on Both Ends5/8"3504,1003314A4000000
     

    Electrically Insulating Linear Sleeve Bearings

    These fiberglass bearings are lightweight, nonmagnetic, and won’t conduct electricity. Bearings are for use with round end-supported shafts. All have a fixed-alignment design for applications where shaft misalignment is unlikely. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).
    Fixed Alignment
    Image of Product. Front orientation. Contains Annotated. Linear Bearings. Electrically Insulating Linear Sleeve Bearings .
    0.001" Shaft Clearance—Bearings with 0.001" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
    Bearings
    Retaining Rings
    Temp.,
    ° F
    For Shaft
    Dia.
    Shaft
    Clearance
    Overall
    Lg.
    OD
    For Housing ID
    With Retaining
    Ring Grooves
    Retaining Ring
    Groove End-to-End Lg.
    With End
    Seals
    Dynamic Linear Load
    Cap. @ Speed
    Static Load
    Cap., lb.
    Min.
    Max.
    For Shaft Material
    Each
    Each
    PTFE-Lined Fiberglass Bearings
    1/2"0.001"1 1/4"7/8"0.8750" to 0.8755"Yes0.975"No150 lb. @ 100 fpm3,100-400375Aluminum, Stainless Steel
    		8356K120000009968K2400000
    5/8"0.001"1 1/2"1 1/8"1.1250" to 1.1255"Yes1.116"No250 lb. @ 100 fpm4,600-400375Aluminum, Stainless Steel
    		8356K13000009968K250000
    3/4"0.001"1 5/8"1 1/4"1.2500" to 1.2505"Yes1.178"No350 lb. @ 100 fpm6,100-400375Aluminum, Stainless Steel
    		8356K14000009968K260000
    1"0.001"2 1/4"1 9/16"1.5625" to 1.5630"Yes1.765"No600 lb. @ 100 fpm11,000-400375Aluminum, Stainless Steel
    		8356K15000009968K270000
     

    Press-In Threaded Inserts for Carbon Fiber, Fiberglass, and Garolite

    Image of Product. Front orientation. Threaded Inserts. Press-In Threaded Inserts for Carbon Fiber, Fiberglass, and Garolite.
    Add threads to dense composites without crushing or splitting them. Press these inserts into a drilled hole and the flexible metal teeth anchor them—no adhesives needed.
    18-8 Stainless Steel and Nylon—With stainless steel threads and a nylon base, these inserts resist rust and mild chemicals.
    Inserts
    Installation
    Tools
    Thread
    Size
    Installed
    Lg.
    Rows of
    Teeth
    Drill Bit
    Size, mm
    For Max.
    Hole Dia., mm
    Each
    Each
    Standard Profile
     
    18-8 Stainless Steel and Nylon
    10-24
    		0.236"212
    		1293907A1010000093913A101000000
    10-24
    		0.335"412
    		1293907A102000093913A10100000
    1/4"-20
    		0.197"112
    		1293907A103000093913A10200000
    1/4"-20
    		0.236"212
    		1293907A104000093913A10200000
    1/4"-20
    		0.315"412
    		1293907A105000093913A10200000
    1/4"-20
    		0.591"412
    		1293907A106000093913A10200000
    M4 x 0.7 mm5 mm112
    		1293918A101000093913A10300000
    M4 x 0.7 mm6 mm212
    		1293918A102000093913A10300000
    M4 x 0.7 mm8.5 mm412
    		1293918A103000093913A10300000
    M5 x 0.8 mm5 mm112
    		1293918A104000093913A10400000
    M5 x 0.8 mm6 mm212
    		1293918A105000093913A10400000
    M5 x 0.8 mm8.5 mm412
    		1293918A106000093913A10400000
    M6 x 1 mm5 mm112
    		1293918A107000093913A10500000
    M6 x 1 mm6 mm212
    		1293918A108000093913A10500000
    M6 x 1 mm8.5 mm412
    		1293918A109000093913A10500000
    M6 x 1 mm15 mm412
    		1293918A110000093913A10500000
     

    Tee-Nut Threaded Inserts for Fiberglass

    Image of Product. Front orientation. Threaded Inserts. Tee-Nut Threaded Inserts for Fiberglass.
    Reduce the risk of splitting or cracking fiberglass. These inserts have three short, thin prongs that won't dig too deep or wedge between layers of the material. Hammer them into a drilled hole and the wide flange distributes the load over a large area.
    Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
    Barrel
    Flange
    Thread
    Size
    Installed
    Lg.
    Dia.
    Lg.
    Dia.
    Thick.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    8-32
    		0.289"0.22"1/4"1/2"0.04"7/32"
    		0.219"10090975A101000000
    10-32
    		0.227"0.243"3/16"1/2"0.04"1/4"
    		0.250"10090975A01500000
    10-32
    		0.500"0.243"3/8"1/2"0.04"1/4"
    		0.250"2590975A51100000
    1/4"-20
    		0.235"0.305"3/16"3/4"0.05"5/16"
    		0.313"5090975A07100000
    M6 x 1 mm6.8 mm7.7 mm5.6 mm19.1 mm1.2 mm7.9 mm
    		7.9 mm2590975A41100000
     
    back to top