McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    73 Products

    Hex Nuts

    The most commonly used hex nuts, these are suitable for fastening most machinery and equipment.
    Fiberglass
    Image of Product. Front orientation. Hex Nuts. Hex Nuts.
    Image of Specification. Front orientation. Hex Nuts. Hex Nuts.
    Fiberglass—With the best strength-to-weight ratio of all our nonmetal hex nuts, these hold up in high-stress applications without adding weight to your assembly. They resist acids, solvents, oil, and salt water.
    Thread
    Size
    Wd.
    Ht.
    Max. Temp.,
    ° F
    Color
    Certificate Type
    Pkg.
    Qty.
    Pkg.
    Fiberglass
    4-40
    		1/4"3/32"190Gray—1091395A005000000
    6-32
    		5/16"7/64"190Gray—1091395A12000000
    8-32
    		3/8"1/8"190Gray—1091395A13000000
    10-24
    		3/8"1/8"190Gray—1091395A14000000
    10-32
    		3/8"1/8"190Gray—1091395A41100000
    1/4"-20
    		7/16"7/32"190Gray—591395A0290000
    1/4"-28
    		7/16"7/32"190Gray—591395A1500000
    5/16"-18
    		1/2"17/64"190Gray—591395A0300000
    5/16"-24
    		1/2"17/64"190Gray—591395A1600000
    3/8"-16
    		9/16"21/64"190GrayMaterial Certificate
    		591395A0310000
    3/8"-24
    		9/16"21/64"190GrayMaterial Certificate
    		591395A1700000
    1/2"-13
    		3/4"7/16"190Gray—591395A0330000
    1/2"-20
    		3/4"7/16"190Gray—591395A1800000
    5/8"-11
    		15/16"35/64"190Gray—591395A03500000
    5/8"-18
    		15/16"35/64"190Gray—591395A19000000
    3/4"-10
    		1 1/8"41/64"190Gray—591395A03600000
    3/4"-16
    		1 1/8"41/64"190Gray—591395A21000000
    7/8"-9
    		1 5/16"25/32"190Gray—191395A2200000
    1"-8
    		1 1/2"55/64"190Gray—191395A0380000
    1"-12
    		1 1/2"55/64"190Gray—591395A24000000
    1"-14
    		1 1/2"55/64"190Gray—591395A25000000
     

    Flange Nuts

    Image of Product. Front orientation. Flange Nuts. Flange Nuts.
    No need for a separate washer—these nuts have a plain flange that distributes pressure evenly for a wide variety of fastening applications. They are ideal for securing screws in oversized or irregularly shaped holes since the flange covers a larger area than standard nuts. Also known as collar nuts.
    Fiberglass
    Fiberglass—With the best strength-to-weight ratio of all our flange nuts, these hold up in high-stress applications without adding weight to your assembly. They also resist acids, solvents, oil, and salt water.
    Flange
    Thread
    Size
    Wd.
    Ht.
    Dia.
    Thk.
    Color
    Each
    Fiberglass
    1/4"-20
    		7/16"19/32"19/32"0.1"Gray98945A05200000
    3/8"-16
    		9/16"3/4"3/4"0.12"Gray98945A0410000
    3/8"-24
    		9/16"3/4"3/4"0.12"Gray98945A0510000
    1/2"-13
    		3/4"7/8"1 1/32"0.13"Gray98945A0430000
    1/2"-20
    		3/4"7/8"1 1/32"0.13"Gray98945A0530000
    5/8"-11
    		15/16"1 1/4"1 9/32"0.13"Gray98945A0450000
    3/4"-10
    		1 1/8"1 19/32"1 1/2"0.13"Gray98945A0480000
     

    Fiberglass Square Nuts

    Image of Product. Front orientation. Square Nuts. Fiberglass Square Nuts.
    These fiberglass square nuts are chemical resistant, nonconductive, and lightweight. Large flat sides make them easy to grip with a wrench and keep them from rotating in channels and square holes.
    Thread
    Size
    Wd.
    Ht.
    Max.
    Temp.
    Color
    Pkg.
    Qty.
    Pkg.
    Fiberglass
    3/8"-16
    		3/4"17/32"Not RatedGray191332A03100000
    1/2"-13
    		7/8"41/64"Not RatedGray191332A0330000
    5/8"-11
    		1 1/8"51/64"Not RatedGray191332A0350000
    3/4"-10
    		1 1/4"57/64"Not RatedGray191332A0360000
    1"-8
    		1 11/16"1 9/64"Not RatedGray191332A03800000
     

    Press-In Threaded Inserts for Carbon Fiber, Fiberglass, and Garolite

    Image of Product. Front orientation. Threaded Inserts. Press-In Threaded Inserts for Carbon Fiber, Fiberglass, and Garolite.
    Add threads to dense composites without crushing or splitting them. Press these inserts into a drilled hole and the flexible metal teeth anchor them—no adhesives needed.
    18-8 Stainless Steel and Nylon—With stainless steel threads and a nylon base, these inserts resist rust and mild chemicals.
    Inserts
    Installation
    Tools
    Thread
    Size
    Installed
    Lg.
    Rows of
    Teeth
    Drill Bit
    Size, mm
    For Max.
    Hole Dia., mm
    Each
    Each
    Standard Profile
     
    18-8 Stainless Steel and Nylon
    10-24
    		0.236"212
    		1293907A1010000093913A101000000
    10-24
    		0.335"412
    		1293907A102000093913A10100000
    1/4"-20
    		0.197"112
    		1293907A103000093913A10200000
    1/4"-20
    		0.236"212
    		1293907A104000093913A10200000
    1/4"-20
    		0.315"412
    		1293907A105000093913A10200000
    1/4"-20
    		0.591"412
    		1293907A106000093913A10200000
    M4 x 0.7 mm5 mm112
    		1293918A101000093913A10300000
    M4 x 0.7 mm6 mm212
    		1293918A102000093913A10300000
    M4 x 0.7 mm8.5 mm412
    		1293918A103000093913A10300000
    M5 x 0.8 mm5 mm112
    		1293918A104000093913A10400000
    M5 x 0.8 mm6 mm212
    		1293918A105000093913A10400000
    M5 x 0.8 mm8.5 mm412
    		1293918A106000093913A10400000
    M6 x 1 mm5 mm112
    		1293918A107000093913A10500000
    M6 x 1 mm6 mm212
    		1293918A108000093913A10500000
    M6 x 1 mm8.5 mm412
    		1293918A109000093913A10500000
    M6 x 1 mm15 mm412
    		1293918A110000093913A10500000
     

    Rectangular Strut Channel Nuts

    Image of Product. Front orientation. Contains Inset. Strut Channel Framing and Fittings. Rectangular Strut Channel Nuts.
    The most common strut channel nuts, these have serrated grooves that grip the lip inside channel.
    Fiberglass—Pair with fiberglass strut channel for a structure that won’t transmit electrical current. When conductivity isn’t a concern, fiberglass is also good for areas exposed to chemicals and salt water.
    For
    Channel
    Thread
    Size
    Ht.
    Wd.
    Ht.
    Pkg.
    Qty.
    Pkg.
    Gray Fiberglass
    1/4"-20
    		1 1/8", 1 1/2", 1 5/8"1 5/8"17/32"13259T78400000
    3/8"-16
    		1 1/8", 1 1/2", 1 5/8"1 5/8"17/32"13259T7850000
    1/2"-13
    		1 1/8", 1 1/2", 1 5/8"1 5/8"17/32"13259T7860000
     

    Electrical-Insulating Female Threaded Standoffs

    Our best electrically insulating standoffs. They prevent electrical currents from passing through enclosures and conductive surfaces. These standoffs are often installed in circuit-breaker housings and semiconductors.
    Hex
    Image of Product. Front orientation. Standoffs. Electrical-Insulating Female Threaded Standoffs, Hex.
    Image of Attribute. Front orientation. Contains Annotated. Standoffs. Electrical-Insulating Female Threaded Standoffs, Hex.
    Image of Attribute. Threaded on Both Ends. Front orientation. Threaded on Both Ends. Electrical-Insulating Female Threaded Standoffs, Hex.

    Threaded on

    Both Ends

    High-Strength Fiberglass-Reinforced Plastic—A lightweight alternative to stainless steel, these have the best strength-to-weight ratio of all our nonmetal standoffs.
    Lg.
    Hex
    Size
    Threading
    Min. Thread
    Lg.
    Dielectric Strength,
    V/mil
    Voltage
    Rating, V
    Temp. Range,
    ° F
    Each
    High-Strength Fiberglass-Reinforced Plastic
     
    1/4"-20
    1"1"Threaded on Both Ends5/16"3501,000-20 to 2483314A800000
    1 1/4"1"Threaded on Both Ends5/16"350600—3314A50000
     
    Round
    Image of Product. Front orientation. Standoffs. Electrical-Insulating Female Threaded Standoffs, Round.
    Image of Attribute. Threaded on Both Ends. Front orientation. Threaded on Both Ends. Electrical-Insulating Female Threaded Standoffs, Round.

    Threaded on

    Both Ends

    High-Strength Fiberglass-Reinforced Plastic—A lightweight alternative to stainless steel, these have the best strength-to-weight ratio of all our nonmetal standoffs.
    Lg.
    OD
    Threading
    Min. Thread
    Lg.
    Dielectric Strength,
    V/mil
    Voltage
    Rating, V
    Temp. Range,
    ° F
    Each
    High-Strength Fiberglass-Reinforced Plastic
     
    3/8"-16
    1 3/8"1 3/4"Threaded on Both Ends3/8"3501,500—3314A200000
    1 3/4"2"Threaded on Both Ends3/8"3502,000-40 to 2663314A300000
    2"2"Threaded on Both Ends9/16"3502,300-40 to 2663314A10000
    2 1/4"1 3/4"Threaded on Both Ends9/16"3502,700—3314A60000
     
    Octagon
    Image of Product. Front orientation. Standoffs. Electrical-Insulating Female Threaded Standoffs, Octagon.
    Image of Attribute. Front orientation. Contains Annotated. Standoffs. Electrical-Insulating Female Threaded Standoffs, Octagon.
    Image of Attribute. Threaded on Both Ends. Front orientation. Threaded on Both Ends. Electrical-Insulating Female Threaded Standoffs, Octagon.

    Threaded on

    Both Ends

    High-Strength Fiberglass-Reinforced Plastic—A lightweight alternative to stainless steel, these have the best strength-to-weight ratio of all our nonmetal standoffs.
    Lg.
    Hex
    Size
    Threading
    Min. Thread
    Lg.
    Dielectric Strength,
    V/mil
    Voltage
    Rating, V
    Each
    High-Strength Fiberglass-Reinforced Plastic
     
    1/2"-13
    3"2 1/2"Threaded on Both Ends5/8"3504,1003314A4000000
     

    Tee-Nut Threaded Inserts for Fiberglass

    Image of Product. Front orientation. Threaded Inserts. Tee-Nut Threaded Inserts for Fiberglass.
    Reduce the risk of splitting or cracking fiberglass. These inserts have three short, thin prongs that won't dig too deep or wedge between layers of the material. Hammer them into a drilled hole and the wide flange distributes the load over a large area.
    Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
    Barrel
    Flange
    Thread
    Size
    Installed
    Lg.
    Dia.
    Lg.
    Dia.
    Thick.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    8-32
    		0.289"0.22"1/4"1/2"0.04"7/32"
    		0.219"10090975A101000000
    10-32
    		0.227"0.243"3/16"1/2"0.04"1/4"
    		0.250"10090975A01500000
    10-32
    		0.500"0.243"3/8"1/2"0.04"1/4"
    		0.250"2590975A51100000
    1/4"-20
    		0.235"0.305"3/16"3/4"0.05"5/16"
    		0.313"5090975A07100000
    M6 x 1 mm6.8 mm7.7 mm5.6 mm19.1 mm1.2 mm7.9 mm
    		7.9 mm2590975A41100000
     

    Wraparound Strut Channel Washers

    Image of Product. Front orientation. Contains Inset. Strut Channel Framing and Fittings. Wraparound Strut Channel Washers.
    Our most stable washers. Wings reach over the edges of strut channel so washers won’t twist when structures vibrate. They also free up your hands during installation—you don’t have to hold them while you insert a threaded rod and twist on a nut.
    Fiberglass—Pair with fiberglass strut channel for a structure that won’t transmit electrical current. When conductivity isn’t a concern, fiberglass is also good for areas exposed to chemicals and salt water.
    For
    Channel
    Each
    Package
    For Rod
    Dia.
    Ht.
    Wd.
    Each
    Pkg.
    Qty.
    Pkg.
    Fiberglass
    3/8"13/16", 1 5/8", 2 7/16", 3 1/4"1 5/8"1273N18200000501273N1840000000
    1/2"13/16", 1 5/8", 2 7/16", 3 1/4"1 5/8"1273N1810000501273N183000000
     
    back to top