A thin layer of aluminized fiberglass on this silicone foam reflects heat to protect sensitive equipment.

One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.

A tighter braid makes these fiberglass seals more durable than High-Temperature Ultra-Conformable Rope Edge Seals.

A silicone-coated fiberglass cover sheds sparks and molten metal splash. These seals resist steam, most refrigerants, salts, and grease. They can withstand temperatures up to 450° F.

The PTFE coating on these fiberglass seals is slippery, so they are easier than the other seals to press fit into oven, furnace, and boiler doors. These seals resist steam, most refrigerants, salts, and grease. They can withstand temperatures up to 500° F.

These loosely-knitted fiberglass seals are more flexible and conformable than High-Temperature Slotted Edge Seals. They resist grease, oil, hydraulic fluid, and solvents and can withstand temperatures up to 1000° F.

Similar to plaster, these adhesive-impregnated sheets become moldable when water is added and harden as they dry. They can be used in sealing, insulating, and covering applications.

These sheets are 50% more tear resistant than other fiberglass fabric sheets.

These sheets can be grounded to reduce static electricity.

Resistant to sparks and molten metal spatter, this fabric withstands temperatures up to 1000° F. It's often used for curtains, blankets, and gaskets.

A blend of aramid and fiberglass, this fabric resists mildew and abrasion. It is self-extinguishing and won't melt, so it's often used for insulation applications.

Often used to create curtains and screens, this fabric has an aluminum foil backing that deflects radiant heat.

Use this tape for light duty bundling and strapping. Fiberglass fibers run along the length.

For added reinforcement, fiberglass fibers run the length and width of this strapping tape. It forms stronger bonds than our other reinforced tape.

When exposed to moisture, this resin-coated fiberglass tape becomes rock-hard in about 30 minutes. Use it for rigid, waterproof repairs.

Seal fiberglass duct and insulation that's faced with an all-service jacket (ASJ). Tape is reinforced with fiberglass.

Fiberglass is laminated with Teflon® PTFE for a slippery, durable tape with excellent chemical and temperature resistance. Use it as a release surface on heat sealers and blister forming equipment.

Also known as roller tape, this tape is coated with silicone to grip smooth surfaces and resist sticky substances, such as ink. It adheres to itself without adhesive.

In addition to handling temperatures up to 500° F, this fiberglass tape is tough enough for abrasive applications such as sand blasting.

This tape reflects intense heat to protect sensitive components.

Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.

Made with a flame-retardant resin, this FRP fiberglass meets ASTM E84 Class A.

This FRP fiberglass is made with a chemical-resistant resin that stands up to harsh environments.

With a coating that reduces static electricity , these sheets are good for use in solder pallets, automated test equipment, electronic assembly workstations, and other applications where static buildup could damage your equipment.

These Garolite CE sheets and bars are often fabricated into parts where high strength is not required.

Using nothing more than standard high-speed steel tooling, Garolite LE can be machined into intricate parts.

Garolite G-7 withstands temperatures up to 425° F—higher than any other grade of Garolite. While not as strong as Garolite G-9 sheets, these sheets and bars offer better arc resistance in dry environments and a higher level of electrical insulation.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Offering higher strength and better heat resistance than Garolite G-10/FR4, these Garolite G-11/FR 5 sheets are suitable for continuous use in elevated temperatures. With a black coating that reduces static electricity, these sheets are good for use in solder pallets, automated test equipment, electronic assembly workstations, and other applications where static buildup could damage your equipment.

Frequently called electrical-grade Garolite, this Garolite G-9 is strong, electrically insulating, and arc resistant in dry environments.

Use these resin-free fabrics to reinforce or repair existing composites as well as create new composites. Mold custom-shaped composite parts by layering your choice of fabric with an epoxy.

This common insulation material is typically used on hot and cold water lines and in process piping.

Made of flexible composite paper, these sheets won't shrink or lose shape in the high temperatures of air furnaces and hot water tanks.

The fiberglass facing on these flexible silicone foam sheets protects against highly abrasive conditions and resists tearing.

Also known as batts, these fiberglass sheets and strips are used to insulate walls, ceilings, and floors.

Wrap rectangular and round ductwork with this flexible insulation.