3D Printer Extruder Heating Elements
Replace damaged heating elements in your 3D printer, or switch them out to print at a faster speed or higher temperature. Also known as hotends, these heating elements receive filament from an extruder, melt it, and then pass it through a nozzle onto the part being printed. They are compatible with most fused filament fabrication (FFF) 3D printers. Changes to the heating element or temperature cartridge will also require a software update, or your printer may overheat.
Select a heating element with a voltage and extrusion type that match your printer. In printers with a direct feed, the extruder is attached to the heating element, feeding filament directly into it.
For printing high-temperature filaments, such as PEEK and Ultem PEI, use Mosquito heating elements. They reach temperatures up to 149° C or 300° F higher than V6 or Volcano styles, so you can melt a wider variety of materials. These heating elements come with everything you need, and are partially assembled—you’ll need to connect the insertion heater and temperature sensor.
| For Extrusion Type | For Filament Dia., mm | Nozzle Opening Dia., mm | Max. Temp. | Insertion Heater Wattage, W | Heating Block Material | Includes | Each | |
12V DC | ||||||||
|---|---|---|---|---|---|---|---|---|
Mosquito | ||||||||
| Direct Feed | 1.75 | 0.4 | 450° C 842° F | 50 | Nickel-Plated Copper | Two 1-m Lg. Quick-Disconnect Cables for Fan and Temperature Sensor (Molex Female 2 Pin × Standard Male 2 Pin); One 1.2-m Lg. Quick-Disconnect Cable for Insertion Heater (Molex Female 2 Pin × Wire Leads with Ferrules); Boron Nitride Paste; Three Hex L-Keys | 0000000 | 0000000 |
24V DC | ||||||||
Mosquito | ||||||||
| Direct Feed | 1.75 | 0.4 | 450° C 842° F | 50 | Nickel-Plated Copper | Two 1-m Lg. Quick-Disconnect Cables for Fan and Temperature Sensor (Molex Female 2 Pin × Standard Male 2 Pin); One 1.2-m Lg. Quick-Disconnect Cable for Insertion Heater (Molex Female 2 Pin × Wire Leads with Ferrules); Boron Nitride Paste; Three Hex L-Keys | 0000000 | 000000 |
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For 3D Printer Part Trade Name | Ht. | Wd. | Dp. | Airflow, cfm | Volume, dBA  | Current, A | Frame Material | Blade Material | Mounting Fasteners Included | Mounting Hole Dia. | Compatible With | Each | |
12V DC—2-Pin Connector (Male Connection) | |||||||||||||
| Mosquito | 0.98" (25 mm) | 0.98" (25 mm) | (0.39") 10 mm | 3 | 31 | 0.10 | Plastic | Plastic | Yes | 0.12" (3 mm) | Molex Micro-Fit 3.0 | 00000000 | 00000 |
24V DC—2-Pin Connector (Male Connection) | |||||||||||||
| Mosquito | 0.98" (25 mm) | 0.98" (25 mm) | (0.39") 10 mm | 3 | 34 | 0.10 | Plastic | Plastic | Yes | 0.12" (3 mm) | Molex Micro-Fit 3.0 | 00000000 | 0000 |
Mosquito Heating
Element
Filament guides hold the filament as it melts in the heating block and moves toward the nozzle. Also known as heat breaks, they transition the filament from the cool area of the heat sink to the heating block.
Thread | |||||||
|---|---|---|---|---|---|---|---|
| For Filament Dia., mm | Overall Lg., mm | Lg., mm | Size | Pitch, mm | Material | Each | |
Mosquito | |||||||
| 1.75 | 30 | 4 | M6 | 1 | Copper, Stainless Steel | 0000000 | 000000 |