About Files
Files, also known as American-pattern and machinists' files, are used to remove material quickly.
Precision files, also known as Swiss-pattern files, are made to exacting measurements to ensure smoothness and are useful for finishing delicate and intricate parts.
More
Files for Plastics, Laminates, and Fiberglass
Extra-sharp teeth cut quickly. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material.
Rapid Cut—Diamond-shaped teeth quickly remove material.
For Fine Finish | ||||||
|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Edge Tooth Style | For Use On | Each | |
Single-Cut Faces | ||||||
| 8" | 3/4" | 1/8" | Single Cut | Plastic, Laminate, Fiberglass | 0000000 | 000000 |
| 10" | 15/16" | 3/16" | Single Cut | Plastic, Laminate, Fiberglass | 0000000 | 00000 |
| 12" | 1 1/8" | 3/16" | Single Cut | Plastic, Laminate, Fiberglass | 0000000 | 00000 |
| 14" | 1 5/16" | 1/4" | Single Cut | Plastic, Laminate, Fiberglass | 0000000 | 00000 |
Rapid-Cut Faces | ||||||
| 10" | 15/16" | 3/16" | Single Cut | Plastic, Laminate, Fiberglass | 0000000 | 00000 |
| 12" | 1 1/8" | 3/16" | Single Cut | Plastic, Laminate, Fiberglass | 0000000 | 00000 |
| 14" | 1 5/16" | 1/4" | Single Cut | Plastic, Laminate, Fiberglass | 0000000 | 00000 |
Digital Durometer Hardness Testers
Measure the hardness of flat materials with a digital display. For more information about durometer scales, please see the bottom of About Rubber.
These testers come with a calibration certificate traceable to NIST that states they’ve passed a test for accuracy. A maximum-reading indicator holds the highest reading until reset. Use the USB/RS-232 port for direct connection to your PC.
Testers for Shore M durometers take accurate readings on materials as thin as 0.05". Use them to take measurements of areas that are too small for durometer readings with a Shore A scale tester.
Mount the tester to an operating stand (sold separately) to ensure it is perfectly parallel to the sample. This reduces error and gives accurate, repeatable readings.
Testers | Operating Stands | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Durometer Hardness Scale | Hardness Measuring Range | Measuring Increments | Accuracy | Ht. | Wd. | Dp. | Min. Material Thick. | Batteries Included | Features | Each | Each | ||
For Use On Plastic, Rubber, Laminate | |||||||||||||
| A | 0-100 | 0.1 | ±1 | 6 1/8" | 2 1/2" | 1 5/8" | 1/4" | Yes | Maximum-Reading Indicator, Tolerance-Setting High/Low Buttons, USB and RS-232 Connectivity | 00000000 | 000000000 | 00000000 | 000000000 |
| D | 0-100 | 0.1 | ±1 | 6 1/8" | 2 1/2" | 1 5/8" | 1/4" | Yes | Maximum-Reading Indicator, Tolerance-Setting High/Low Buttons, USB and RS-232 Connectivity | 00000000 | 00000000 | 00000000 | 00000000 |
| M | 0-100 | 0.1 | ±4 | 6 1/8" | 2 1/2" | 1 5/8" | 1/16" | Yes | Maximum-Reading Indicator, Tolerance-Setting High/Low Buttons, USB and RS-232 Connectivity | 000000000 | 00000000 | 0000000 | 00000000 |
Durometer Hardness Testers
Measure the hardness of flat materials, such as plastic, rubber, and laminate. For more information about durometer scales, please see the bottom of About Rubber.
Style 2 testers have a narrow base for access to confined areas. You can hold them in your hand.
Style 3 testers come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.
Testers with maximum-reading indicator hold the highest reading until reset.
Mount these testers to an optional operating stand (sold separately) to make sure they’re parallel to your sample for accurate readings and repeatability.
Testers | Operating Stands | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Durometer Hardness Scale | Hardness Measuring Range | Measuring Increments | Accuracy | Ht. | Wd. | Dp. | Dia. | Min. Material Thick. | Specifications Met | Features | Each | Each | ||
For Use On Plastic, Rubber, Laminate | ||||||||||||||
Style 1 | ||||||||||||||
| A | 0-100 | 1 | ±1 | 4" | 2 1/4" | 1 3/4" | __ | 1/4" | ASTM D2240 | Maximum-Reading Indicator | 000000 | 000000000 | 00000000 | 000000000 |
| D | 0-100 | 1 | ±1 | 4" | 2 1/4" | 1 3/4" | __ | 1/4" | ASTM D2240 | Maximum-Reading Indicator | 000000 | 00000000 | 00000000 | 00000000 |
Style 2 | ||||||||||||||
| A | 0-100 | 1 | ±1 | 4" | 2 1/4" | 1 3/4" | __ | 1/4" | ASTM D2240 | Maximum-Reading Indicator | 00000000 | 00000000 | 00000000 | 00000000 |
| D | 0-100 | 1 | ±1 | 4" | 2 1/4" | 1 3/4" | __ | 1/4" | ASTM D2240 | Maximum-Reading Indicator | 00000000 | 00000000 | 00000000 | 00000000 |
| O | 0-100 | 1 | ±1 | 4" | 2 1/4" | 1 3/4" | __ | 1/4" | ASTM D2240 | Maximum-Reading Indicator | 00000000 | 00000000 | 00000000 | 00000000 |
| OO | 0-100 | 1 | ±2 | 4" | 2 1/4" | 1 3/4" | __ | 1/4" | ASTM D2240 | __ | 00000000 | 00000000 | 00000000 | 00000000 |
Style 3 | ||||||||||||||
| A | 0-100 | 1 | ±1 | 6 1/8" | 2 1/4" | 1" | __ | 1/4" | ASTM D2240 | __ | 00000000 | 000000 | 00000000 | 00000000 |
| D | 0-100 | 1 | ±1 | 6 1/8" | 2 1/4" | 1" | __ | 1/4" | ASTM D2240 | __ | 00000000 | 000000 | 00000000 | 00000000 |
| O | 0-100 | 1 | ±1 | 6 1/8" | 2 1/4" | 1" | __ | 1/4" | ASTM D2240 | __ | 00000000 | 000000 | 00000000 | 00000000 |
| OO | 0-100 | 1 | ±2 | 6 1/8" | 2 1/4" | 1" | __ | 1/4" | ASTM D2240 | __ | 00000000 | 000000 | 00000000 | 00000000 |
Style 4 | ||||||||||||||
| A | 0-100 | 1 | ±1 | 4 1/2" | __ | __ | 1/2" | 1/4" | __ | Maximum-Reading Indicator | 00000000 | 000000 | 000000 | 00 |
| D | 0-100 | 1 | ±1 | 4 1/2" | __ | __ | 1/2" | 1/4" | __ | Maximum-Reading Indicator | 00000000 | 000000 | 000000 | 00 |
O-Ring Durometer Hardness Testers
Test the hardness of thin and irregularly shaped plastic, rubber, and laminate parts, such as O-rings. These testers can be used on products where the surface area is too small for accurate durometer readings with a standard Shore A tester, such as the rounded surface of O-rings. They include O-ring fixtures that hold five standard-sized O-rings in place during testing. These testers are also capable of measuring materials as thin as 0.05″, about the thickness of a credit card. On the display, they’ll show the highest reading until they’re reset. They include a calibration certificate traceable to NIST that states they’ve passed a test for accuracy.
Use the included test blocks to practice taking accurate measurements at the right pressure against your workpiece. Send your measurement data directly to your PC using the USB port.
| For O-Ring Wd. | For Durometer Hardness Scale | Hardness Measuring Range | Measuring Increments | Accuracy | Min. Material Thick. | Max. Display Rotation Angle | Batteries Included | Features | Includes | Each | |
For Use On Plastic, Rubber, Laminate | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/16", 3/32", 1/8", 3/16", 1/4" | M | 0-100 | 0.1" | ±4 | 1/16" | 270° | Yes | Maximum-Reading Indicator, Tolerance-Setting High/Low Buttons, USB and RS-232 Connectivity | Digital Durometer Hardness Tester for M Hardness Scale, Seven 2" x 2" Test Blocks (Durometer M), Five O-Ring Fixtures, Operating Stand, Set Plug | 0000000 | 000000000 |
| For Durometer Hardness Scale | Hardness Measuring Range | Measuring Increments | Accuracy | Ht. | Wd. | Dp. | Min. Material Thick. | Max. Display Rotation Angle | Batteries Included | Specifications Met | Features | Each | |
For Use On Plastic, Rubber, Laminate | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M | 0-100 | 0.1 | ±4 | 6 1/8" | 2 1/2" | 1 5/8" | 1/16" | 270° | Yes | ASTM D2240 | Maximum-Reading Indicator, Tolerance-Setting High/Low Buttons, USB and RS-232 Connectivity | 000000000 | 000000000 |
| For Durometer Hardness Scale | Hardness Measuring Range | Lg. | Wd. | Dp. | Includes | Container Type | Each | |
| M | 30-90 | 2" | 2" | 1/4" | Seven 2" x 2" Test Blocks (Durometer 30M-90M) | Carrying Case | 0000000 | 0000000 |