McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    11 Products

    Half-Round Rasps

    Image of Product. Front orientation. Files. Half-Round Rasps, Style A.
    Image of Product. Front orientation. Files. Half-Round Rasps, Style B.

    Style A

    Style B

    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Rasp Face. Half-Round Rasps.
    Image of Specification. Front orientation. Contains Border. Double Cut. Half-Round Rasps.
    Image of Specification. Front orientation. Contains Border. Single Cut. Half-Round Rasps.

    Rasp Face

    Double Cut

    Single Cut

    Use on concave, convex, and flat surfaces. These rasps have sharp individual teeth that quickly remove large amounts of soft, clog-prone materials.
    Style A
    Image of Product. Front orientation. Files. Half-Round Rasps, Style A.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Rasp Face. Half-Round Rasps.
    Image of Specification. Front orientation. Contains Border. Single Cut. Half-Round Rasps.

    Rasp Face

    Single Cut

    Style A rasps do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
    Single Cut—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.
    For Coarse
    Finish
    Lg.
    Wd.
    Thk.
    Edge Tooth
    Style
    For Use On
    Each
    Rasp Round Face × Rasp Flat Face
     
    Rigid
    8"3/4"3/16"Single CutBrass, Bronze, Copper, Plastic, Rubber, Wood, Leather4239A12000000
    10"15/16"1/4"Single CutBrass, Bronze, Copper, Plastic, Rubber, Wood, Leather4239A1400000
    10"1 1/8"3/16"Single CutBrass, Bronze, Copper, Plastic, Rubber, Wood, Leather4239A1800000
    12"1 1/8"5/16"Single CutBrass, Bronze, Copper, Plastic, Rubber, Wood, Leather4239A1600000
    12"1 5/16"1/4"Single CutBrass, Bronze, Copper, Plastic, Rubber, Wood, Leather4239A1900000
     
    Style B
    Image of Product. Front orientation. Files. Half-Round Rasps, Style B.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Rasp Face. Half-Round Rasps.
    Image of Specification. Front orientation. Contains Border. Double Cut. Half-Round Rasps.

    Rasp Face

    Double Cut

    Double Cut—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.
    For Coarse
    Finish
    Lg.
    Wd.
    Thk.
    Edge Tooth
    Style
    For Use On
    Each
    Rasp × Double Cut Round Face × Rasp × Double Cut Flat Face
     
    Rigid
    8"7/8"3/16"Without TeethBrass, Bronze, Copper, Plastic, Rubber, Wood, Leather4263A1000000
    10"1 1/16"3/8"Without TeethBrass, Bronze, Copper, Plastic, Rubber, Wood, Leather4263A300000
     

    Rectangular Rasps

    Image of Product. Front orientation. Files. Rectangular Rasps, Style A.
    Image of Product. Front orientation. Files. Rectangular Rasps, Style B.

    Style A

    Style B

    Image of Specification. Front orientation. Contains Border. Rasp Face. Rectangular Rasps.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Double-Cut Face. Rectangular Rasps.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Single-Cut Face with Chip Breaker. Rectangular Rasps.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Single-Cut Edge. Rectangular Rasps.

    Rasp Face

    Double-Cut

    Face

    Single-Cut

    Face with

    Chip

    Breaker

    Single-Cut Edge

    Sharp individual rasp teeth quickly remove large amounts of soft, clog-prone materials better than regular files.
    Style A
    Image of Product. Front orientation. Files. Rectangular Rasps, Style A.
    Image of Specification. Front orientation. Contains Border. Rasp Face. Rectangular Rasps.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Double-Cut Face. Rectangular Rasps.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Single-Cut Edge. Rectangular Rasps.

    Rasp Face

    Double-Cut

    Face

    Single-Cut Edge

    Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.
    Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.
    For Coarse
    Finish
    Lg.
    Wd.
    Thk.
    Edge Tooth
    Style
    For Use On
    Each
    Rasp Flat Face × Double Cut Flat Face
     
    Rigid
    14"1 1/2"1/4"Flat Single CutBrass, Bronze, Copper, Plastic, Rubber, Wood, Leather4277A14000000
     
    Style B
    Image of Product. Front orientation. Files. Rectangular Rasps, Style B.
    Image of Specification. Front orientation. Contains Border. Rasp Face. Rectangular Rasps.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Double-Cut Face. Rectangular Rasps.

    Rasp Face

    Double-Cut

    Face

    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Single-Cut Face with Chip Breaker. Rectangular Rasps.
    Image of Specification. Front orientation. ZoomedIn view. Contains Border. Single-Cut Edge. Rectangular Rasps.

    Single-Cut

    Face with

    Chip

    Breaker

    Single-Cut Edge

    Style B rasps do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
    Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.
    Single-Cut Face with Chip Breaker—Speed up reaching a fine finish. They remove material as quickly as double-cut files while leaving behind a smooth finish at the same time. They have single-cut teeth divided by diagonal cutting edges that act as chip breakers—the chip breakers rough the surface while the single-cut teeth smooth it.
    Single-Cut Edge—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.
    For Coarse
    Finish
    Lg.
    Wd.
    Thk.
    Edge Tooth
    Style
    For Use On
    Each
    Rasp Flat Face × Double Cut Flat Face
     
    Rigid
    14"1 3/4"5/16"Flat Single CutBrass, Bronze, Copper, Plastic, Rubber, Wood, Leather42355A11000000
     
    Rasp Flat Face × Single Cut Flat Face with Chip Breaker
     
    Rigid
    14"1 11/16"3/16"Flat Single CutBrass, Bronze, Copper, Plastic, Rubber, Wood, Leather42355A1200000
     

    Round Rasps

    Image of Product. Front orientation. Files. Round Rasps.
    Good for filing holes and concave surfaces, these rasps have sharp individual teeth that quickly remove large amounts of soft, clog-prone materials. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
    Tapered Round
    Image of Specification. Front orientation. Contains Border. Round. Round Rasps, Tapered File.

    Tapered Round

    For Coarse Finish
    Lg.
    For Use On
    Dia.
    Each
    Rasp Round Face
     
    Rigid
    10"Plastic, Rubber, Wood, Leather3/8"4285A41000000
     
    back to top