About Structural Adhesives
More
Surface Fillers
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Devcon Plastic Steel® Liquid can repair areas where brazing and welding is impractical.
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Weight | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Devcon Plastic Steel® Liquid | |||||||||||||
10230 | 25 lbs. | Pail, Jug | 90 | 16 hrs. | Thick Liquid | 9:1 | 52 sq. in. @ 1/4" | 55° to 250° | Dark Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Copper, Stainless Steel, Cast Iron | 00000000 | 000000000 |
Coolant-Resistant Surface Fillers
Repair small leaks and cracks in coolant systems for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems. Pour them into your coolant to fix both internal and external leaks. They contain ceramic microfibers and copper particles to create a permanent seal. They’re compatible with antifreeze and other coolant system additives.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden, min. | Reaches Full Strength, min. | Consistency | Temp. Range, °F | Color | For Use On | Each | |
16 | Jug | 7 | 10 | Thick Liquid | Not Rated to 500° | Brown | Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Galvanized Steel, Galvanized Iron, Titanium, Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, PTFE Plastic, Polyethylene Plastic, Polypropylene Plastic | 0000000 | 000000 |
Low-Temperature Concrete Patching Compounds
Use these two-part compounds to patch concrete floors, stairs, and walls in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds. Once cured, they withstand impact, abrasion, and chemicals. The size listed is the combined total of the two parts.
Polyurea compounds are ready for foot traffic in ten minutes and vehicle traffic in 30 minutes. They are self-leveling, but can be mixed with sand (not included) and applied with a trowel.
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approximate Coverage @ Thick. | Max. Thick. | For Use Outdoors | Application Temp. Range, °F | Color | Finishing Method | For Use On | Each | |
Polyurea | ||||||||||||||
1 gal. | Jug | 5 | 30 min. | Thin Liquid | 1:1 | 4 1/2 sq. ft. @ 1/4" | 1" | Yes | -5° to 90° | Gray | Drill, Sand | Concrete, Stone | 00000000 | 0000000 |
1 gal. | Jug | 5 | 30 min. | Thin Liquid | 1:1 | 4 1/2 sq. ft. @ 1/4" | 1" | Yes | -5° to 90° | Red | Drill, Sand | Concrete, Stone | 0000000 | 000000 |
Asphalt Crack Fillers
These crack fillers come in an easy-to-pour jug for filling cracks in asphalt up to 1/2" wide. They’re ready for traffic in 2 to 5 days.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Begins to Harden, min. | Reaches Full Strength, days | Consistency | For Max. Crack Wd. | For Use Outdoors | Application Temp. Range, °F | Color | For Use On | Each | |
1 | Jug | 30 | 2 | Thick Liquid | 1/2" | Yes | 55° to 100° | Black | Asphalt | 0000000 | 000000 |
Quick-Set Contact Adhesives
Bonds reach full strength in 10 minutes. Apply this adhesive to one or both surfaces, then bring together to bond. For nonporous surfaces, air dry before bonding.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, gal. | Type | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Consistency | Viscosity, cP | Temp. Range, °F | For Joining | Color | Each | |
3M Adhesives | ||||||||||||
1000NF | 1 | Jug | 60 sec. | 10 min. | 400 | Thin Liquid | 750 | 60° to 80° | Fabric, Foam, Wood | Purple | 00000000 | 0000000 |
Glue
Use these glues for general purpose bonding and repairs.
Elmer's glue is white, but dries clear.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Max. Temp., °F | Color | For Joining | Each | |
1 gal. | Jug | 10 sec. | 24 hrs. | 150° | Clear | Cardboard, Wood | 000000 | 000000 |
Water-Resistant Wood Glue
This glue withstands limited exposure to water. It bonds soft and hard woods, and it can be sanded and painted after reaching full strength.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Consistency | Max. Temp., °F | Color | Specifications Met | Each | |
1 gal. | Jug | 10 min. | 24 hrs. | Thick Liquid | 140° | Beige | ANSI/HPVA HP-1 Type 1 | 0000000 | 000000 |
Wood Glue
Bond both soft and hard wood. This glue can be sanded and painted after reaching full strength.
Waterproof Wood Glue
In addition to being waterproof, this glue is made of FDA listed materials. It bonds soft and hard woods, and can be sanded and painted after reaching full strength.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Consistency | Max. Temp., °F | Color | Specifications Met | Each | |
32 fl. oz. | Jug | 10 min. | 25 min. | Thick Liquid | 120° | Beige | ANSI/HPVA HP-1 Type 1, FDA Compliant 21 CFR 175.105 | 0000000 | 000000 |
1 gal. | Jug | 10 min. | 25 min. | Thick Liquid | 120° | Beige | ANSI/HPVA HP-1 Type 1, FDA Compliant 21 CFR 175.105 | 0000000 | 00000 |
Additives and Reinforcements for Composites
Mix these additives with melted plastic, epoxies, or adhesives to make parts stronger and more wear resistant without adding much weight. You can use them in batches to tackle repairs and small parts instead of machining your part from a sheet, bar, or other shape.
Fiberglass
These additives increase a part’s strength and ability to withstand frequent blows. But, they’re not as strong or as lightweight as carbon fiber additives. They also block electric currents from passing through. Their short fibers are best for castings and foams to prevent cracking as resin shrinks. The amount you use to start should equal about 10-35% of your composite’s weight.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Compatible With | Concentration | Net Weight | Type | Material | Form | Particle Size | CAS Number | Each | |
Fiberglass | |||||||||
Thermoplastics, Thermosets | 98% | 10 lbs. | Jug | Plastic | Loose Fiber | 840 microns | 65997-17-3 | 0000000 | 000000 |