These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Everything you need to repair cracked, worn, and damaged surfaces—even underwater.

Repair small leaks and cracks in coolant tanks for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems.

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.

These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.

Seal leaks around fasteners with a protruding head.

Seal leaks around small holes.

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Fill cracks up to 10" deep on vertical and overhead surfaces.

Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

Patch concrete floors, stairs, and walls with these compounds.

Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.

Use these two-part fillers to rebuild cracked or worn plastic surfaces.

Spray these surface fillers on molded plastic parts that have surface blemishes, scratches, and mold lines. Use with ABS, polystyrene, and glass-filled nylon.

Waterproof and strong, these surface fillers remain flexible when repairing rips, tears, and holes in neoprene rubber. They're often used on wetsuits.

Create grooves in poured concrete slabs to control cracking caused by drying, settling, and freezing.

Once concrete begins to set up and surface water reabsorbs, finish with a trowel to compact the top layer for a smooth, hard surface.

Use floats after edging and grooving to smooth the surface and allow trapped air and water to escape.

Improve the strength of your concrete mix by eliminating trapped air.

With a durable one-piece construction, these boxes have no seams or welds to crack and leak.

These knives have a sturdy blade for scraping paint and debris and for applying and smoothing joint and spackling compounds.

Keep drywall compound close at hand so you can apply it over seams quickly and efficiently.

Use these mashers to mix drywall compound in large containers.

Smooth and spread grout between tiles.

Remove hardened flecks of mortar, dirt, and other debris.

Roll the seams where wall coverings meet for an even, continuous appearance.

Fill and conceal small cracks, nail holes, and blemishes. Compounds are ready to use.

Simplify and speed up hole repairs—stick a patch over the area and cover with spackling compound.

Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.

Tape hides seams and smooths out corners. It has an adhesive back for bonding and requires joint compound for finishing. It can also be used to repair damaged walls.

Spray these compounds onto ceilings to create a popcorn texture that covers stains, patches, and chips. The nozzle is upright for easy application.

Spread patching compounds in dry, wet, and even water-filled holes.

These patching compounds are the most flexible and watertight we offer.

Fill cracks with these coatings to stop leaks and deaden sound.

Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls.

Fix damaged wood or build up and replace missing wood.

Used for brick, block, and stone laying as well as for repairing masonry, mortar mixes consist of fine sand and masonry cement.

Made from silicone, these sealants are RTV (room-temperature vulcanizing).

Resistant to mold and mildew, these sealants are well suited to high-humidity environments.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

This sealant includes a material certificate with traceable lot number, test report, and product shelf life.

Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics.

Thinner than non-sagging sealants, this sealant flows easily into cracks and has a smooth finish.

With chemical and metal additives that are picked up by X-ray machines and metal detectors, these sealants are designed to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs in food-processing facilities.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Mix a small amount of water-based paint with this caulk to match the color of your surface.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.

These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Clean surfaces before applying sealant to promote bonding.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.

Seal joints and gaps in concrete.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Dispense sealants packaged in sausage packs.

Immerse the nozzle in the sealant and pull back the rod to fill.

Dispense sealants from cartridges with ease and control.

These flexible extensions add length and bend 180° to get into hard-to-reach areas.

Power without a cord means you can take these sealant-dispensing guns wherever you need them.