About Sealant Flexibility
More
About Structural Adhesives
More
About Finishing
More
Roof Joint Sealants
Keep out the elements by sealing roof joints. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces. They are good for use in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Buna-N | ||||||||||||
10.3 | Cartridge | 30 min. | 3 days | Not Rated | Not Rated | Not Rated | Not Rated | Not Rated to 400° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Aluminum | 0000000 | 000000 |
Self-Leveling Roof Joint Sealants
Keep out the elements by sealing roof joints. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish. They're good for use in environments with wide temperature fluctuation.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Tensile Strength | Hardness | Application Temp. Range, °F | Temp. Range, °F | For Joining | Color | Each | |
EPDM Rubber | |||||||||||
10.3 | Cartridge | 4 hrs. | 3 days | Not Rated | Not Rated | 20° to 120° | -40° to 200° | Metal, Plastic, Rubber, Asphalt, Composites, Masonry, Wood | Black | 0000000 | 000000 |
Quick-Set Epoxy Structural Adhesives
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts.
50132 works especially well on plastics and composites.
Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
5 Minute Epoxy | 14200 | 15 | Bottle | 5 min. | 12 hrs. | 1,900 | 2 | 1:1 | Thick Liquid (10,000 cP) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 000000 | 000000 |
5 Minute Epoxy | 14250 | 0.84 | Syringe | 5 min. | 12 hrs. | 1,900 | 2 | 1:1 | Thick Liquid (10,000 cP) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 0000000 | 00000 |
5 Minute Epoxy | 14270 | 1.69 | Cartridge | 5 min. | 12 hrs. | 1,900 | 2 | 1:1 | Thick Liquid (10,000 cP) | -40° to 200° | Amber | Metal, Plastic, Masonry, Wood | 00000000 | 00000 |
Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
PlasticWeld | 50132 | 0.85 | Syringe | 5 min. | 60 min. | 2,000 | Not Rated | 1:1 | Thick Liquid (9,000 cP) | -20° to 300° | Yellow | Metal, Plastic, Rubber, Composites, Masonry, Wood | 000000 | 00000 |
Waterproof Epoxy Structural Adhesives
Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.
The size listed is the combined total of the two parts.
Mfr. Model | Container | Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
MarineWeld | 50172 | 0.85 | Syringe | 5 min. | 1 hrs. | 1,800 | Not Rated | 1:1 | Paste (100,000 cP) | -20° to 300° | White | Salt Spray, Submersible | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 000000 | 00000 |
Urethane Structural Adhesives
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
The size listed is the combined total of the two parts.
Mfr. Model | Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Plastic Bonder | 50139 | 0.85 | Syringe | 15 min. | 30 min. | 1,000 | Not Rated | 1:1 | Thick Liquid (50,000 cP) | -20° to 250° | Black | Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Masonry, Composites, Masonry, Wood | 000000 | 00000 |
Quick-Set Instant-Bond Adhesives
Form bonds in 5 seconds or less with these adhesives, also known as super glue. Use an accelerator (sold separately) to shorten the time it takes to reach full strength.
SF100 bonds dirty or oily surfaces.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | Specifications Met | For Joining | Each | |
3M Scotch-Weld Adhesives | ||||||||||||
SF100 | 0.1 | Tube | 0.006" | 4 sec. | 24 hrs. | Thin Liquid (80 cP) | -65° to 180° | Clear | Commercial Standard A-A-3097 | Fabric, Plastic, Rubber, Wood | 00000000 | 00000 |
SF100 | 0.7 | Bottle | 0.006" | 4 sec. | 24 hrs. | Thin Liquid (80 cP) | -65° to 180° | Clear | Commercial Standard A-A-3097 | Fabric, Plastic, Rubber, Wood | 00000000 | 00000 |
Flexible Instant-Bond Adhesives
Accommodate joint movement with these adhesives that remain pliable when cured. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Elongation | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | ||||||||||||
4851 | 0.7 | Bottle | 0.006" | 20 sec. | 24 hrs. | Thin Liquid (380 cP) | 85% | -65° to 120° | Clear | Composites, Fabric, Metal, Plastic, Rubber | 00000000 | 000000 |
4861 | 0.7 | Bottle | 0.008" | 20 sec. | 24 hrs. | Thick Liquid (4,250 cP) | 85% | -65° to 120° | Clear | Composites, Fabric, Metal, Plastic, Rubber | 00000000 | 00000 |
Low-Odor Instant-Bond Adhesives
Form bonds without the strong odor of other instant-bond adhesives. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
403 and 460 work especially well on porous materials such as wood, paper, and fabric.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
403 | 0.7 | Bottle | 0.008" | 50 sec. | 24 hrs. | Thick Liquid (1,380 cP) | -65° to 200° | Clear | Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
460 | 0.7 | Bottle | 0.004" | 50 sec. | 24 hrs. | Thin Liquid (40 cP) | -65° to 200° | Clear | Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
460 | 16 | Bottle | 0.004" | 50 sec. | 24 hrs. | Thin Liquid (40 cP) | -65° to 200° | Clear | Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
Skin-Guard Instant-Bond Adhesives
Make strong, instant bonds on a variety of materials—but not your skin. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
0.07 | Tube | 0.006" | 10 sec. | 24 hrs. | Thin Liquid (40 cP) | -65° to 160° | Clear | Ceramic, Fabric, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
Instant-Bond Adhesives
Also known as super glue, these adhesives bond quickly. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
240 works especially well on porous materials.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
401 | 0.1 | Tube | 0.005" | 15 sec. | 24 hrs. | Thin Liquid (110 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
401 | 0.7 | Bottle | 0.005" | 15 sec. | 24 hrs. | Thin Liquid (110 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
401 | 16 | Bottle | 0.005" | 15 sec. | 24 hrs. | Thin Liquid (110 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
4011 | 0.7 | Bottle | 0.005" | 15 sec. | 24 hrs. | Thin Liquid (120 cP) | -65° to 180° | Clear | Cardboard, Fabric, Metal, Plastic, Rubber, Wood | 000000 | 00000 |
4471 | 0.7 | Bottle | 0.008" | 15 sec. | 24 hrs. | Thin Liquid (630 cP) | -65° to 180° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
4471 | 16 | Bottle | 0.008" | 15 sec. | 24 hrs. | Thin Liquid (630 cP) | -65° to 180° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
Permabond Adhesives | |||||||||||
240 | 1 | Bottle | 0.017" | 15 sec. | 24 hrs. | Thick Liquid (1,850 cP) | -65° to 180° | Clear | Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood | 0000000 | 00000 |
Toughened Instant-Bond Adhesives
Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
435 and 438 work on porous materials such as wood, paper, and fabric.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
435 | 0.7 | Bottle | 0.006" | 30 sec. | 24 hrs. | Thin Liquid (180 cP) | -65° to 220° | Clear | Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
435 | 16 | Bottle | 0.006" | 30 sec. | 24 hrs. | Thin Liquid (180 cP) | -65° to 220° | Clear | Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
438 | 0.7 | Bottle | 0.006" | 30 sec. | 24 hrs. | Thin Liquid (180 cP) | -65° to 220° | Black | Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
Wicking Instant-Bond Adhesives
These thin liquids, also known as super glue, flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
406 | 0.1 | Tube | 0.004" | 15 sec. | 24 hrs. | Thin Liquid (20 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
406 | 0.7 | Bottle | 0.004" | 15 sec. | 24 hrs. | Thin Liquid (20 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
406 | 16 | Bottle | 0.004" | 15 sec. | 24 hrs. | Thin Liquid (20 cP) | -65° to 250° | Clear | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
Quick-Set Wicking Instant-Bond Adhesives
For faster bonding, these adhesives begin to harden in half the time of our other wicking instant-bond adhesives. Also known as super glue, they have a thin consistency that allows them to flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | Specifications Met | For Joining | Each | |
3M Scotch-Weld Adhesives | ||||||||||||
SF20 | 0.7 | Bottle | 0.004" | 4 sec. | 24 hrs. | Thin Liquid (20 cP) | -65° to 180° | Clear | Commercial Standard A-A-3097 | Fabric, Plastic, Rubber, Wood | 00000000 | 000000 |
Loctite® Adhesives | ||||||||||||
4501 | 0.7 | Bottle | 0.004" | 5 sec. | 24 hrs. | Thin Liquid (20 cP) | -65° to 180° | Clear | __ | Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
Instant-Bond Adhesive Gel for Hard-to-Bond Materials
Quickly adhere hard-to bond surfaces with these adhesives, also known as super glue. These thick gels fill gaps between parts and won't drip on vertical surfaces. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Dispense adhesives in syringes with a dispensing gun (sold separately).
Dispense adhesives in cartridges with a standard caulk gun.
PR Gel works especially well on plastic and rubber.
SI Gel bonds dirty and oily surfaces.
454 and 4541 are suitable for porous and dissimilar materials.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
3M Scotch-Weld Adhesives | |||||||||||
SI Gel | 0.7 | Tube | 0.02" | 20 sec. | 24 hrs. | Gel (125,000 cP) | -65° to 180° | Clear | Fabric, Plastic, Rubber, Wood | 00000000 | 000000 |
Loctite® Adhesives | |||||||||||
454 | 0.1 | Tube | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 0000 |
454 | 0.3 | Syringe | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
454 | 0.7 | Tube | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
454 | 1 | Syringe | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
454 | 7 | Tube | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
454 | 10.5 | Cartridge | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 250° | Clear | Cardboard, Composites, Fabric, Foam, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
4541 | 0.3 | Syringe | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 180° | Clear | Cardboard, Fabric, Metal, Plastic, Rubber, Wood | 0000000 | 00000 |
4541 | 0.7 | Tube | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 180° | Clear | Cardboard, Fabric, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
Cement for Abrasive Grains
Coat cotton, canvas, and felt buffing wheels with this cement, then apply abrasive grains.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Begins to Harden | Reaches Full Strength | Consistency | Viscosity | Temp. Range | Color | For Joining | Each | |
1 | Pail | 30 min. | 24 hrs. | Thin Liquid | Not Rated | Not Rated | Brown | Fabric | 000000 | 000000 |
Contact Adhesives
Apply these adhesives on two surfaces, air dry, and then bring together to bond.
Adhesives that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Consistency | Viscosity, cP | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | Each | |
3M Adhesives | |||||||||||||
1099 | 32 fl. oz. | Can | 40 min. | 72 hrs. | 3,405 | Thick Liquid | 3,000 | -10° to 230° | Beige | Fabric, Foam, Plastic, Rubber | __ | 00000000 | 000000 |
1099 | 1 gal. | Can | 40 min. | 72 hrs. | 3,405 | Thick Liquid | 3,000 | -10° to 230° | Beige | Fabric, Foam, Plastic, Rubber | __ | 00000000 | 000000 |
4475 | 32 fl. oz. | Can | 10 min. | 72 hrs. | Not Rated | Thick Liquid | 8,500 | -10° to 230° | Clear | Ceramic, Fabric, Glass, Plastic, Rubber | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA; CT; DC; DE; MA; MD; ME; NJ; NY; PA; RI; UT; Northern VA; VT | 00000000 | 000000 |
Pliobond Adhesives | |||||||||||||
35 | 8 fl. oz. | Brush-Top Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | __ | 0000000 | 00000 |
35 | 16 fl. oz. | Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | __ | 0000000 | 00000 |
35 | 32 fl. oz. | Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 00000 |
35 | 1 gal. | Can | 3 min. | 14 days | 1,200 | Thick Liquid | 6,500 | -40° to 370° | Beige | Cardboard, Fabric, Foam, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 0000000 | 000000 |
Adhesives | |||||||||||||
__ | 4 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
__ | 8 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
__ | 16 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | __ | 000000 | 00000 |
__ | 32 fl. oz. | Brush-Top Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 000000 | 00000 |
__ | 1 gal. | Can | 2 min. | 24 hrs. | Not Rated | Thin Liquid | 1,200 | -30° to 150° | Clear | Copper, Fabric, Foam, Rubber, Steel, Wood | Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA | 000000 | 000000 |
Nonflammable Contact Adhesives
Bond porous materials with these low-odor, nonflammable adhesives. Apply to both surfaces, air dry, and then bring together to bond.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Shear Strength | Consistency | Viscosity | Temp. Range, °F | Color | For Joining | Each | |
Weldwood Adhesives | |||||||||||
32 fl. oz. | Can | 30 min. | 72 hrs. | Not Rated | Thick Liquid | Not Rated | -40° to 180° | Amber | Cardboard, Composites, Fabric, Wood | 0000000 | 000000 |
1 gal. | Can | 30 min. | 72 hrs. | Not Rated | Thick Liquid | Not Rated | -40° to 180° | Amber | Cardboard, Composites, Fabric, Wood | 0000000 | 00000 |
Spray Adhesives
Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.
Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Net Weight, oz. | Approximate Coverage | Inverted Dispensing | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | 1-11 | 12-Up | |
3M Adhesives | |||||||||||||
74 | 16.9 | 26 sq. ft. @ 2.5 gm/ft² | No | 30 sec. | 24 hrs. | 200 | 0° to 200° | Clear | Fabric, Foam | CA | 0000000 | 000000 | 000000 |
74 | 16.9 | 26 sq. ft. @ 2.5 gm/ft² | No | 30 sec. | 24 hrs. | 200 | 0° to 200° | Orange | Fabric, Foam | CA | 0000000 | 00000 | 00000 |
74CA | 19 | 29 sq. ft. @ 2.5 gm/ft² | No | 30 sec. | 24 hrs. | 200 | 0° to 200° | Clear | Fabric, Foam | __ | 0000000 | 00000 | 00000 |
74CA | 19 | 29 sq. ft. @ 2.5 gm/ft² | No | 30 sec. | 24 hrs. | 200 | 0° to 200° | Orange | Fabric, Foam | __ | 0000000 | 00000 | 00000 |
77 | 13.44 | 21 sq. ft. @ 2.5 gm/ft² | No | 15 sec. | 24 hrs. | 300 | 0° to 150° | Clear | Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood | CA | 0000000 | 00000 | 00000 |
77 | 16.8 | 26 sq. ft. @ 2.5 gm/ft² | No | 15 sec. | 24 hrs. | 300 | 0° to 150° | White | Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood | CA | 0000000 | 00000 | 00000 |
77CA | 18 | 28 sq. ft. @ 2.5 gm/ft² | No | 15 sec. | 24 hrs. | 300 | 0° to 150° | Clear | Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood | __ | 0000000 | 00000 | 00000 |
Quick-Set Contact Adhesives
Bonds reach full strength in 10 minutes. Apply this adhesive to one or both surfaces, then bring together to bond. For nonporous surfaces, air dry before bonding.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, gal. | Type | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Consistency | Viscosity, cP | Temp. Range, °F | For Joining | Color | Each | |
3M Adhesives | ||||||||||||
1000NF | 1 | Jug | 60 sec. | 10 min. | 400 | Thin Liquid | 750 | 60° to 80° | Fabric, Foam, Wood | Purple | 00000000 | 0000000 |
Temporary Positioning Spray Adhesives
Spray a coating of this glue onto one surface to temporarily hold small parts. It forms a strong bond, but will not harden completely until 24 hours later.
Container Net Weight, oz. | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear Strength | Max. Temp., °F | Color | For Joining | Each | |
Gorilla Adhesives | |||||||||
---|---|---|---|---|---|---|---|---|---|
14 | 400 sq. ft. @ 1 gm/ft² | 5 min. | 24 hrs. | Not Rated | 90° | Clear | Fabric, Metal | 0000000 | 000000 |
Flexible Hot-Melt Glue Sticks
Remaining flexible after curing, these glue sticks accommodate joint movement. All are FDA compliant 21 CFR 175.105 and suitable for food packaging.
Dia. | Lg. | Begins to Harden | Reaches Full Strength | Application Temp. Range, °F | Consistency | Viscosity, cP | Elongation | Color | Specifications Met | For Joining | Approx. No. of Sticks per lb. | 1 lbs. | 5 lbs. | 25 lbs. | |
7/16" | 10" | 60 sec. | 24 hrs. | 350° to 390° | Thick Liquid | 5,375 | 1,300% | Clear | FDA Compliant 21 CFR 175.105 | Ceramic, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 18 | 0000000 |
Fast-Hardening Hot-Melt Glue Sticks
Glue hardens in 15 seconds or less to bond quickly. Made of FDA listed materials, it is suitable for food packaging.
Dia. | Lg. | Begins to Harden | Reaches Full Strength | Application Temp. Range, °F | Consistency | Viscosity, cP | Color | Specifications Met | For Joining | Approx. No. of Sticks per lb. | 1 lbs. | 5 lbs. | 25 lbs. | |
7/16" | 4" | 15 sec. | 24 hrs. | 250° to 380° | Thick Liquid | 5,000 | Beige | FDA Compliant 21 CFR 175.105 | Cardboard, Fabric | 45 | 0000000 | |||
7/16" | 15" | 5 sec. | 24 hrs. | 250° to 300° | Thin Liquid | 1,160 | Beige | FDA Compliant 21 CFR 175.105 | Cardboard, Fabric | 10 | 0000000 | |||
7/16" | 15" | 15 sec. | 24 hrs. | 250° to 380° | Thick Liquid | 5,000 | Beige | FDA Compliant 21 CFR 175.105 | Cardboard, Fabric | 10 | 0000000 | |||
5/8" | 10" | 15 sec. | 24 hrs. | 250° to 380° | Thick Liquid | 5,000 | Beige | FDA Compliant 21 CFR 175.105 | Cardboard, Fabric | 10 | 0000000 |
Putty-to-Rubber Moldable Glue
This putty-like glue cures into a pliable rubber. Use it to repair seals and cracks, or mold it into hooks and bumpers.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Temp. Range, °F | Color | For Joining | Pkg. Qty. | Pkg. | |
0.12 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -40° to 355° | Blue, Red, Yellow | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 000000 |
0.12 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -40° to 355° | Gray | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 00000 |
0.12 | One-Time-Use Packet | 30 min. | 24 hrs. | 100% | -40° to 355° | White | Cardboard, Ceramic, Composites, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood | 3 | 0000000 | 00000 |
Glue Shapes
These small tabs of pressure-sensitive adhesive offer convenient, no-mess bonding.
Dia. | Thick. | Consistency | Temp. Range, °F | Color | For Joining | Pkg. Qty. | Pkg. | |
1/2" | 0.014" | Gel | 20° to 140° | Clear | Ceramic, Fabric, Wood | 1,000 | 0000000 | 000000 |
High-Temperature Glue
This high-temperature glue sticks quickly, but can be repositioned for up to 2 hours before it begins to harden. Glue can be applied and allowed to dry, then reactivated with water when ready for bonding. It cannot be sold to Canada due to import regulations.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Consistency | Temp. Range, °F | Color | For Joining | Cannot Be Sold To | Each | |
32 fl. oz. | Bottle | 2 hrs. | 12 hrs. | Thick Liquid | -30° to 500° | Beige | Cardboard, Fabric, Glass, Metal, Wood | Canada | 000000 | 000000 |
1 gal. | Pail | 2 hrs. | 12 hrs. | Thick Liquid | -30° to 500° | Beige | Cardboard, Fabric, Glass, Metal, Wood | Canada | 000000 | 000000 |
5 gal. | Pail | 2 hrs. | 12 hrs. | Thick Liquid | -30° to 500° | Beige | Cardboard, Fabric, Glass, Metal, Wood | Canada | 000000 | 000000 |
Glue
Use these glues for general purpose bonding and repairs.
3M glue cannot be sold to California due to local regulatory limits on VOCs (volatile organic compounds).
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Max. Temp., °F | Color | For Joining | Cannot Be Sold To | Each | |
27 | 13 | Aerosol Can | 15 sec. | 24 hrs. | 140° | Clear | Fabric, Metal, Plastic, Rubber, Wood | CA | 00000000 | 000000 |
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Max. Temp., °F | Color | For Joining | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
27 | 13 | Aerosol Can | 15 sec. | 24 hrs. | 140° | Clear | Fabric, Metal, Plastic, Rubber, Wood | CA | 12 | 00000000 | 0000000 |
Oil-Resistant Gasketing Adhesives
Form bonds that will not degrade in the presence of oils and fuels. Gasket adhesives hold gaskets in place during assembly.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Manufacturer Model Number | Size | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Temp. Range, °F | Color | For Use On | Each | |
Loctite® Adhesives | |||||||||
30540 | 5 fl. oz. | Tube | 2 | 24 | -20° to 170° | Black | Vinyl Plastic, Fabric | 000000 | 000000 |