PEEK Plastic Fillers | McMaster-Carr

Filter by

For Joining

Container Type

Maximum Temperature

Type

Color

Formulation

Manufacturer Model Number

Adhesive Type

Manufacturer

Cure Type

Clarity

Begins to Harden

Mixing Required

Width

Thickness

Minimum Temperature

Consistency

Reaches Full Strength

Shear Strength

Container Size

REACH

RoHS

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Elongation

43 Products

About Structural Adhesives

Quick-Set Epoxy Structural Adhesives

For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.

The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

HY4090 is a blend of epoxy and instant-bond adhesive for a balance of strength, cure speed, and temperature resistance.

Loctite® Adhesives

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
HY4090	1.69	Cartridge	3 min.	7 days	2,420	Not Rated	1:1	Thick Liquid (19,000 cP)	-65° to 300°	Gray	Metal, Plastic, Rubber, Composites, Masonry, Wood	00000000	000000
HY4090	1.69	Cartridge	3 min.	7 days	2,420	Not Rated	1:1	Thick Liquid (19,000 cP)	-65° to 300°	Off-White	Metal, Plastic, Rubber, Composites, Masonry, Wood	00000000	00000
HY4090	13.5	Cartridge	3 min.	7 days	2,420	Not Rated	1:1	Thick Liquid (19,000 cP)	-65° to 300°	Off-White	Metal, Plastic, Rubber, Composites, Masonry, Wood	0000000	000000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.69 fl. oz. Loctite® Cartridges	000000000	00000
Mixer Nozzle for 6.76 fl. oz. and 13.5 fl. oz. Cartridges	000000000	0000
Air-Powered Dispensing Gun for 1.69 fl. oz. Loctite® Cartridges	000000000	000000
Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	00000
Dispensing Gun for 13.5 fl. oz. Cartridges	0000000	000000

Epoxy Structural Adhesives for Harsh Environments

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions. Epoxies are the strongest structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.

The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

Container				Strength
Size	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	Environment	For Joining		Each
Adhesives
1.69 fl. oz.	Cartridge	30 min.	24 hrs.	360	Not Rated	2:1	Thick Liquid (7,000 cP)	-50° to 350°	Amber	Corrosive, Salt Spray, Submersible	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Plastic, Plastic to Rubber, Plastic to Composites, Rubber, Rubber to Composites, Composites	000000	000000
1.69 fl. oz.	Cartridge	40 min.	24 hrs.	Not Rated	Not Rated	2:1	Thick Liquid (10,000 cP)	-65° to 350°	White	Corrosive, Salt Spray, Submersible	Metal, Metal to Plastic, Plastic	000000	00000

Mixer Nozzles, Plungers, and Dispensing Guns

		Each
Mixer Nozzle for 1.69 fl. oz. Cartridges	00000000	00000
Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	00000

Epoxy Structural Adhesives for Hard-to-Bond Materials

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these adhesives. They bond dissimilar materials. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an adhesive that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.

The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.

Container				Strength
Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining	Includes		Each
1.69	Cartridge	30 min.	24 hrs.	360	Not Rated	2:1	Thick Liquid (9,000 cP)	-50° to 350°	Amber	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Ceramic, Composites, Glass, Wood, Wood to Glass	__	000000	000000
1.69	Cartridge	30 min.	24 hrs.	360	Not Rated	2:1	Thick Liquid (9,500 cP)	-50° to 350°	Amber	Plastic	1:1 and 2:1 Mix Ratio Plungers, Mixer Nozzle, One 2-oz. Bottle of Etching Solution	0000000	000000
1.69	Cartridge	30 min.	24 hrs.	360	Not Rated	2:1	Thick Liquid (9,500 cP)	-50° to 350°	Amber	Plastic	1:1 and 2:1 Mix Ratio Plungers, Mixer Nozzle, Mixing Stick, Two 4-oz. Bottles of Etching Solution, Two Brushes, Two Mixing Trays	0000000	000000
1.69	Cartridge	90 min.	72 hrs.	Not Rated	Not Rated	1:1	Thick Liquid (6,000 cP)	-85° to 270°	Amber	Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Ceramic, Composites, Glass, Wood, Wood to Glass	__	000000	00000
48	Bottle	30 min.	24 hrs.	360	Not Rated	2:1	Thick Liquid (9,000 cP)	-50° to 350°	Amber	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Rubber, Rubber to Composites, Rubber to Glass, Ceramic, Composites, Glass, Wood, Wood to Glass	__	000000	000000

Mixer Nozzle for 1.69 fl. oz. Cartridges	00000000	Each	00000
Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	Each	00000

Urethane Structural Adhesives

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

The size listed is the combined total of the two parts. Dispense adhesives in 10.1 fl. oz. cartridges with a standard caulk gun.

5570 is also known as silane modified polymer.

Loctite® Adhesives with Mixer Nozzle

	Container				Strength
Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
5570	10.1	Cartridge	30 min.	7 days	400	Not Rated	Paste (Not Rated)	-40° to 200°	White	Metal, Metal to Plastic, Metal to Rubber, Metal to Composites, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Composites, Plastic to Glass, Plastic to Masonry, Rubber, Rubber to Composites, Rubber to Glass, Rubber to Masonry, Composites, Glass, Masonry, Wood, Wood to Glass	00000000	000000

Flexible Instant-Bond Adhesives

Accommodate joint movement with these adhesives that remain pliable when cured. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.

	Container
Mfr. Model No.	Size, fl. oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Consistency (Viscosity)	Elongation	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
4902	0.7	Bottle	0.004"	10 sec.	24 hrs.	Thin Liquid (200 cP)	155%	-65° to 180°	Clear	Ceramic, Composites, Glass, Metal, Plastic, Rubber, Wood	000000000	000000

Light-Activated Instant-Bond Adhesives

For easy positioning, these adhesives begin to harden only when exposed to light.

Thin liquids flow to fill small gaps between close-fitting parts.

	Container
Mfr. Model No.	Size, fl. oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Light Intensity Requirements to Reach Full Strength	Cure Type	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Loctite® Adhesives
4311	1	Bottle	0.008"	5 sec.	24 hrs.	10 sec. @ 30 mW/cm²	UV Light, Visible Light	Thin Liquid (1,050 cP)	-65° to 200°	Green	Ceramic, Composites, Glass, Metal, Plastic, Rubber, Wood	000000	000000

Activator for Loctite® 352 (1.8-oz. Bottle)	0000000	Each	000000
Activator for Loctite® 352 (4.5-oz. Aerosol Can)	0000000	Each	00000

Flexible Light-Activated Instant-Bond Adhesives

These adhesives stay pliable for flexible bonds that resist cracking. For easy positioning, they begin to harden only when exposed to light.

1700A257 and 2454N1 fluoresce under UV light for easy inspection.

Container
Size, fl. oz.	Type	Max. Gap Size Filled	Begins to Harden	Reaches Full Strength	Light Intensity Requirements to Reach Full Strength	Cure Type	Consistency (Viscosity)	Elongation	Temp. Range, °F	Color	For Joining		Each
Adhesives
1.69	Bottle	0.25"	5 sec.	30 min.	5 sec. @ 100 mW/cm²	UV Light	Thin Liquid (850 cP)	Not Rated	45° to 80°	Clear	Ceramic, Composites, Glass, Metal, Plastic, Rubber	000000	000000

Glue-on-a-Roll

Apply this glue-like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape, these rolls have a thin film of pressure-sensitive glue on a peel-away liner. They are thinner and more conformable than tape with adhesive on both sides.

9482PC and 9485PC are a good choice for precise applications, even on slippery plastics. They're reinforced with fiber so they keep their shape and don’t ooze out, unlike softer adhesives.

3M Glue
Mfr. Model No.	Wd.	Lg., yd.	Thick.	Temp. Range, °F	Color	For Joining		Each
9482PC	1/2"	60	0.002"	Not Rated to 250°	Clear	Plastic	0000000	000000
9482PC	3/4"	60	0.002"	Not Rated to 250°	Clear	Plastic	0000000	00000
9482PC	1"	60	0.002"	Not Rated to 250°	Clear	Plastic	0000000	00000
9485PC	1/2"	60	0.005"	Not Rated to 250°	Clear	Plastic	0000000	00000
9485PC	3/4"	60	0.005"	Not Rated to 250°	Clear	Plastic	0000000	00000
9485PC	1"	60	0.005"	Not Rated to 250°	Clear	Plastic	0000000	00000

High-Temperature Glue-on-a-Roll

This silicone glue withstands high temperatures and bonds slippery plastics. Also known as adhesive transfer tape, these rolls have a thin film of pressure-sensitive glue on a peel-away liner. They are thinner and more conformable than tape with adhesive on both sides.

					0.001" Thick.		0.002" Thick.
Wd.	Lg., yd.	Temp. Range, °F	Color	For Joining		Each		Each
1/4"	60	-100° to 500°	Clear	Plastic	00000000	000000	00000000	000000
1/2"	60	-100° to 500°	Clear	Plastic	00000000	00000	0000000	00000
3/4"	60	-100° to 500°	Clear	Plastic	00000000	000000	0000000	000000
1"	60	-100° to 500°	Clear	Plastic	00000000	000000	0000000	000000

Spray Adhesives

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.

Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).

												Each
Mfr. Model No.	Container Net Weight, oz.	Approximate Coverage	Inverted Dispensing	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Temp. Range, °F	Color	For Joining	Cannot Be Sold To		1-11	12-Up
3M Adhesives
77	13.44	21 sq. ft. @ 2.5 gm/ft²	No	15 sec.	24 hrs.	300	0° to 150°	Clear	Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	CA	0000000	000000	000000
77	16.8	26 sq. ft. @ 2.5 gm/ft²	No	15 sec.	24 hrs.	300	0° to 150°	White	Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	CA	0000000	00000	00000
77CA	18	28 sq. ft. @ 2.5 gm/ft²	No	15 sec.	24 hrs.	300	0° to 150°	Clear	Cardboard, Ceramic, Composites, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	__	0000000	00000	00000
94ET	19.8	31 sq. ft. @ 2.5 gm/ft²	No	10 min.	24 hrs.	300	0° to 210°	Clear	Ceramic, Composites, Glass, Metal, Plastic	__	0000000	00000	00000

High-Strength Spray Adhesives

Form bonds with twice the strength of our other spray adhesives. Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to adhere.

Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).

							Temp. Range, °F						Each
Mfr. Model No.	Container Net Weight, oz.	Approximate Coverage	Inverted Dispensing	Begins to Harden	Reaches Full Strength	Shear Strength, lbs./sq. in.	Min.	Max.	Color	For Joining	Cannot Be Sold To		1-11	12-Up
3M Adhesives
90	12.23	19 sq. ft. @ 2.5 gm/ft²	No	60 sec.	24 hrs.	600	0°	250°	Clear	Ceramic, Composites, Glass, Metal, Plastic, Rubber	CA	0000000	000000	000000
90	17.6	27 sq. ft. @ 2.5 gm/ft²	Yes	60 sec.	24 hrs.	600	0°	250°	Clear	Ceramic, Composites, Glass, Metal, Plastic, Rubber	CA	00000000	00000	00000
90CA	19	29 sq. ft. @ 2.5 gm/ft²	No	60 sec.	24 hrs.	600	0°	250°	Clear	Ceramic, Composites, Glass, Metal, Plastic, Rubber	__	0000000	00000	00000