These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.

Repair small leaks and cracks in coolant tanks for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Made from silicone, these sealants are RTV (room-temperature vulcanizing).

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Compliant with ASTM E-595, these sealants produce almost no volatile materials in a vacuum.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Impervious to the swelling effects of oil, fuel, and solvents, use these high-strength sealants to assemble and repair fuel systems and tanks.

Thinner than non-sag sealants, these flow easily into cracks and have a smooth finish.

Prepare joints and surfaces to ensure proper sealant adhesion.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

For quick repairs, these epoxies begin to harden in 6 minutes or less.

For invisible bond lines, these adhesives dry clear.

With excellent resistance to corrosive chemicals and salt water, these epoxies work in tough conditions.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene, with these epoxies.

Even when used under water, these adhesives maintain their strength.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

No need to mix these acrylics—apply adhesive to one surface and activator to the other, then bring surfaces together to bond.

Solvents, oils, acids, and other chemicals won't degrade the bond of these adhesives.

Toughened adhesives are blended with rubber particles for better impact resistance than standard acrylics. They form resilient bonds.

Accommodate joint movement with these adhesives that remain pliable when cured.

Form bonds without the strong odor of other instant-bond adhesives.

Fasten hard-to-bond plastics, such as polypropylene and polyethylene.

To invisibly bond transparent plastics, these adhesives won’t turn cloudy.

Also known as super glue, these adhesives bond quickly.

Bond plastics, porous materials, or dirty surfaces.

These super glues are blended with rubber for better impact and moisture resistance than other instant-bond adhesives.

Form bonds without the strong odor of other instant-bond adhesives.

Form bonds without the strong odor of other instant-bond adhesives.

These thin liquids, also known as super glue, flow into small gaps.

For easy positioning, these adhesives begin to harden only when exposed to light.

Apply this glue-like tape for a no-mess alternative to liquid adhesives, hot melts, and staples. Also known as adhesive transfer tape.

This general purpose glue tackles a variety of repairs.

The polyurethane glue in these cartridges has nearly twice the shear strength of other hot-melt adhesives.

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.