Finger-Safe Terminal Blocks

Filter by

Number of Circuits

Mounting Location

For Wire Gauge

Wire Connection

Spring-Clamp Terminal

System of Measurement

Voltage

Color

Current per Circuit

Number of Terminals per Circuit

Width

Number of Mounting Holes

Number of Output Connections per Circuit

DIN Rail Trade Size

Length

Height

Certification

C-UL Recognized Component

UL Listed

UL Recognized Component

Maximum Temperature

For Input Wire Gauge

DIN Rail Height

Performance

For Output Wire Gauge (AWG)

1/0

2/0

Terminal Center-to-Center

Export Control Classification Number (ECCN)

EAR99

REACH

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

RoHS

Compliant

Compliant with Exemptions

Forward

How can we improve?

223 Products

Touch-Safe Terminal Blocks


Style A	Style B	Style C

These terminal blocks protect you from shocks and prevent short circuits. The terminals are recessed in the block, so you can't accidentally touch them when installing or adjusting your wire.

Screw-Clamp-Terminal Wire Connection—The clamp flattens the wire to resist pullout and vibration better than screw terminals. For an even stronger and more conductive connection, crimp a terminal or wire ferrule onto the end of the wire.

For DIN 3 Rails—Unlike other surface-mount terminal blocks, these have a notch that snaps onto DIN 3 rail. You can also screw them directly onto your control panel or other surface.

Markers—Label your terminal block connections so you can identify them at a glance. These markers extend from underneath the terminal block.

Terminal Blocks																	Markers
												Mounting Holes
Style	No. of Circuits	For Wire Ga.	Wire Connection	Terminal Size	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Max. Temp., ° F	Color	For DIN Rail Trade Size	Dia.	No. of	Enclosure Rating		Each	Pkg. Qty.		Pkg.







			600V AC/600V DC—20 amp per Circuit

			A	2	22 to 12	Screw-Clamp Terminal	M3	5/16"	1/2"	3/4"	3/4"	221	White	—	0.12"	1	—	00000000	00000	—	———	0


			A	3	22 to 12	Screw-Clamp Terminal	M3	5/16"	7/8"	3/4"	3/4"	221	White	—	0.12"	2	—	00000000	0000	—	———	0
			A	4	22 to 12	Screw-Clamp Terminal	M3	5/16"	1 3/16"	3/4"	3/4"	221	White	—	0.12"	3	—	00000000	0000	—	———	0
			A	6	22 to 12	Screw-Clamp Terminal	M3	5/16"	1 13/16"	3/4"	3/4"	221	White	—	0.12"	5	—	00000000	0000	—	———	0
			A	8	22 to 12	Screw-Clamp Terminal	M3	5/16"	2 7/16"	3/4"	3/4"	221	White	—	0.12"	7	—	00000000	0000	—	———	0
			A	9	22 to 12	Screw-Clamp Terminal	M3	5/16"	2 3/4"	3/4"	3/4"	221	White	—	0.12"	8	—	00000000	0000	—	———	0
			A	10	22 to 12	Screw-Clamp Terminal	M3	5/16"	3 1/16"	3/4"	3/4"	221	White	—	0.12"	9	—	00000000	0000	—	———	0
			A	12	22 to 12	Screw-Clamp Terminal	M3	5/16"	3 11/16"	3/4"	3/4"	221	White	—	0.12"	11	—	00000000	0000	—	———	0




					600V AC—30 amp per Circuit

					B	4	18 to 10	Screw-Clamp Terminal	No. 8	9/16"	2 3/8"	1 3/16"	1 3/4"	220	Black	3	0.18"	2	IP20	0000000	0000	10	00000000	00000


					B	6	18 to 10	Screw-Clamp Terminal	No. 8	9/16"	3 1/2"	1 3/16"	1 3/4"	220	Black	3	0.18"	2	IP20	0000000	00000	10	00000000	0000
					B	12	18 to 10	Screw-Clamp Terminal	No. 8	9/16"	6 7/8"	1 3/16"	1 3/4"	220	Black	3	0.18"	2	IP20	0000000	00000	10	00000000	0000




							600V AC/600V DC—30 amp per Circuit

							A	2	18 to 10	Screw-Clamp Terminal	M3	3/8"	11/16"	3/4"	13/16"	221	White	—	0.15"	1	—	00000000	0000	—	———	0


							A	3	18 to 10	Screw-Clamp Terminal	M3	3/8"	1 1/16"	3/4"	13/16"	221	White	—	0.15"	2	—	00000000	0000	—	———	0
							A	4	18 to 10	Screw-Clamp Terminal	M3	3/8"	1 7/16"	3/4"	13/16"	221	White	—	0.15"	3	—	00000000	0000	—	———	0
							A	6	18 to 10	Screw-Clamp Terminal	M3	3/8"	2 1/4"	3/4"	13/16"	221	White	—	0.15"	5	—	00000000	0000	—	———	0
							A	8	18 to 10	Screw-Clamp Terminal	M3	3/8"	3"	3/4"	13/16"	221	White	—	0.15"	7	—	00000000	0000	—	———	0
							A	9	18 to 10	Screw-Clamp Terminal	M3	3/8"	3 7/16"	3/4"	13/16"	221	White	—	0.15"	8	—	00000000	0000	—	———	0
							A	10	18 to 10	Screw-Clamp Terminal	M3	3/8"	3 13/16"	3/4"	13/16"	221	White	—	0.15"	9	—	00000000	0000	—	———	0
							A	12	18 to 10	Screw-Clamp Terminal	M3	3/8"	4 5/8"	3/4"	13/16"	221	White	—	0.15"	11	—	00000000	0000	—	———	0




									600V AC/600V DC—40 amp per Circuit

									A	2	20 to 8	Screw-Clamp Terminal	M3	1/2"	13/16"	15/16"	7/8"	221	White	—	0.17"	1	—	00000000	0000	—	———	0


									A	3	20 to 8	Screw-Clamp Terminal	M3	1/2"	1 1/4"	15/16"	7/8"	221	White	—	0.17"	2	—	00000000	0000	—	———	0
									A	4	20 to 8	Screw-Clamp Terminal	M3	1/2"	1 3/4"	15/16"	7/8"	221	White	—	0.17"	3	—	00000000	0000	—	———	0
									A	6	20 to 8	Screw-Clamp Terminal	M3	1/2"	2 11/16"	15/16"	7/8"	221	White	—	0.17"	5	—	00000000	0000	—	———	0
									A	8	20 to 8	Screw-Clamp Terminal	M3	1/2"	3 5/8"	15/16"	7/8"	221	White	—	0.17"	7	—	00000000	0000	—	———	0
									A	9	20 to 8	Screw-Clamp Terminal	M3	1/2"	4 1/16"	15/16"	7/8"	221	White	—	0.17"	8	—	00000000	0000	—	———	0
									A	10	20 to 8	Screw-Clamp Terminal	M3	1/2"	4 9/16"	15/16"	7/8"	221	White	—	0.17"	9	—	00000000	0000	—	———	0
									A	12	20 to 8	Screw-Clamp Terminal	M3	1/2"	5 1/2"	15/16"	7/8"	221	White	—	0.17"	11	—	00000000	0000	—	———	0




									600V AC/600V DC—63 amp per Circuit

									A	2	14 to 6	Screw-Clamp Terminal	M3	9/16"	1"	1 1/8"	1 1/16"	221	White	—	0.17"	1	—	00000000	0000	—	———	0


	A	3							14 to 6	Screw-Clamp Terminal	M3	9/16"	1 9/16"	1 1/8"	1 1/16"	221	White	—	0.17"	2	—	00000000	0000	—	———	0
	A	4							14 to 6	Screw-Clamp Terminal	M3	9/16"	2 3/16"	1 1/8"	1 1/16"	221	White	—	0.17"	3	—	00000000	0000	—	———	0
	A	6							14 to 6	Screw-Clamp Terminal	M3	9/16"	3 3/8"	1 1/8"	1 1/16"	221	White	—	0.17"	5	—	00000000	0000	—	———	0
	A	8							14 to 6	Screw-Clamp Terminal	M3	9/16"	4 1/2"	1 1/8"	1 1/16"	221	White	—	0.17"	7	—	00000000	0000	—	———	0
	A	9							14 to 6	Screw-Clamp Terminal	M3	9/16"	5 1/8"	1 1/8"	1 1/16"	221	White	—	0.17"	8	—	00000000	0000	—	———	0
	A	10							14 to 6	Screw-Clamp Terminal	M3	9/16"	5 11/16"	1 1/8"	1 1/16"	221	White	—	0.17"	9	—	00000000	00000	—	———	0
	A	12							14 to 6	Screw-Clamp Terminal	M3	9/16"	6 7/8"	1 1/8"	1 1/16"	221	White	—	0.17"	11	—	00000000	00000	—	———	0




									600V AC/600V DC—85 amp per Circuit

									C	2	18 to 4	Screw Terminal	1/4"	5/8"	1 3/16"	1 1/4"	1 1/8"	302	Black	—	0.18"	1	—	0000000	0000	—	———	0


			C	3					18 to 4	Screw Terminal	1/4"	5/8"	1 3/4"	1 1/4"	1 1/8"	302	Black	—	0.18"	2	—	0000000	00000	—	———	0
			C	4					18 to 4	Screw Terminal	1/4"	5/8"	2 7/16"	1 1/4"	1 1/8"	302	Black	—	0.18"	3	—	0000000	00000	—	———	0
			C	5					18 to 4	Screw Terminal	1/4"	5/8"	3"	1 1/4"	1 1/8"	302	Black	—	0.18"	4	—	0000000	00000	—	———	0
			C	6					18 to 4	Screw Terminal	1/4"	5/8"	3 11/16"	1 1/4"	1 1/8"	302	Black	—	0.18"	5	—	0000000	00000	—	———	0
			C	8					18 to 4	Screw Terminal	1/4"	5/8"	4 15/16"	1 1/4"	1 1/8"	302	Black	—	0.18"	7	—	0000000	00000	—	———	0
			C	10					18 to 4	Screw Terminal	1/4"	5/8"	6 3/16"	1 1/4"	1 1/8"	302	Black	—	0.18"	9	—	0000000	00000	—	———	0
			C	12					18 to 4	Screw Terminal	1/4"	5/8"	7 7/16"	1 1/4"	1 1/8"	302	Black	—	0.18"	11	—	0000000	00000	—	———	0

Distribution Blocks

With the help of distribution blocks, you can take a high-current wire from your power source and connect it to one or more electrical devices.

Screw-Clamp Terminal Input Connection


	Terminal Block End Stop

Blocks with a screw-clamp terminal input wire connection have a current rating based on NEC table 310-16 using 75° C copper wire.

Extendable—Extendable blocks attach to each other to create custom-sized distribution blocks.

Jumper Cable Terminal—Blocks with a jumper cable terminal connect to other blocks to increase the number of outputs.

Terminal Block End Stops—End stops (sold separately) mount at the end of a group of blocks to prevent movement.

	Distribution Blocks													Terminal Block End Stops
			No. of Connections Per Circuit
	Current per Circuit, amp	Voltage	Input (For Wire Ga.)	Output (For Wire Ga.)	Wd.	Ht.	Dp.	Enclosure Rating	Certification	Flammability Rating	Features		Each		Each
DIN-Rail Mount







				1 Circuit

				80	1,000V AC/1,000V DC	3 (14-4)	4 (14-10)	1 1/8"	2 5/8"	2"	IP20, NEMA 1	UL Recognized Component, CE Marked	—	Jumper Cable Terminal	0000000	000000	0000000	00000


				115	600V AC/600V DC	1 (14-2)	1 (14-2)	3/4"	4 1/8"	1 11/16"	IP20	UL Listed, CE Marked	UL 94 V-0	—	0000000	00000	———	0
				115	600V AC/600V DC	1 (14-2)	4 (14-10)	3/4"	4 1/8"	1 11/16"	IP20	UL Listed, CSA Certified, CE Marked	UL 94 V-0	—	0000000	00000	———	0
				115	1,000V AC/1,000V DC	1 (8-2)	1 (10-6), 6 (14-6)	1 1/8"	3"	2"	IP20, NEMA 1	UL Recognized Component, CSA Certified, CE Marked	—	Jumper Cable Terminal	0000000	00000	0000000	0000
				200	600V AC/600V DC	1 (14-3/0)	4 (14-2)	1 1/8"	3 5/8"	2 11/16"	IP20	UL Listed, CSA Certified, CE Marked	UL 94 V-0	—	0000000	00000	———	0
				335	600V AC/600V DC	1 (6-400 MCM)	8 (14-2)	2 1/4"	4 3/4"	3 5/16"	IP20	UL Recognized Component, CE Marked	UL 94 V-0	—	0000000	00000	———	0




						3 Circuits

						115	1,000V AC/1,000V DC	1 (8-2)	1 (10-6), 6 (14-6)	3 5/16"	3"	2"	IP20, NEMA 1	UL Recognized Component, CE Marked	—	—	0000000	00000	0000000	0000


						Surface Mount







										1 Circuit

										335	600V AC/600V DC	2 (14-4/0)	8 (14-2)	2 1/4"	4 3/8"	3 3/16"	IP20	UL Recognized Component, CSA Certified, CE Marked	UL 94 V-0	Extendable	0000000	00000	———	0


										760	600V AC	2 (4-4/0)	8 (14- 2/0)	2 1/2"	4.63"	3 3/8"	IP20	UL Listed, CSA Certified, CE Marked	UL 94 V-0	Extendable	0000000	00000	———	0
										760	600V AC/600V DC	2 (4-4/0)	12 (14-4)	2 1/2"	4.63"	3 3/8"	IP20	UL Listed, CSA Certified, CE Marked	UL 94 V-0	Extendable	0000000	00000	———	0

Bus-Bar Input Connection


	Terminal Block End Stop

Choose blocks with a bus-bar input wire connection to distribute power from flat conductors without the need for an adapter.

Terminal Block End Stops—End stops (sold separately) mount at the end of a group of blocks to prevent movement.

	Distribution Blocks														Terminal Block End Stops
			No. of Connections Per Circuit					Bus Bar, mm
	Current per Circuit, amp	Voltage	Input (For Wire Ga.)	Output (For Wire Ga.)	Wd.	Ht.	Dp.	Wd.	Thk.	Enclosure Rating	Certification	Flammability Rating		Each		Each
DIN-Rail Mount







				1 Circuit

				160	1,000V AC/1,000V DC	1	6 (14-6)	1 1/8"	3"	2"	12	4	IP20, NEMA 1	UL Recognized Component, CSA Certified, CE Marked	UL 94 V-0	0000000	000000	0000000	00000


				420	1,000V AC/1,000V DC	1	2 (14-2), 4 (14-8), 5 (14-6)	1 13/16"	4"	2 3/8"	25	10	IP20, NEMA 1	UL Recognized Component, CSA Certified, CE Marked	UL 94 V-0	0000000	00000	0000000	0000

Modular DIN-Rail Mount Terminal Blocks

Mix and match these terminal blocks to get the exact number of circuits you need in a single setup. Add blocks for thermocouples, fuses, and grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.

The screw-clamp terminals flatten your wire so it stays put when vibrated or pulled. If you need to change wiring frequently without adjusting a screw, consider a quick-connect terminal block with spring-clamp or lever-clamp terminals.

Terminal Blocks with Screw-Clamp Terminals

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Bar Jumpers—Metal poles create an electrical connection between blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit. Cut jumpers to size with a hacksaw or high-force wire cutter. Add covers so jumpers don't touch the screws on the outermost blocks.

Insulation—Terminal blocks with insulated jumpers maintain their IP20 rating to prevent shocks and short circuits. Blocks with noninsulated jumpers lose their IP20 rating for touch protection because the jumpers introduce exposed metal to the circuit.

	Terminal Blocks											Covers		End Stops		Bar Jumpers
										Each
	No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	For DIN Rail Trade Size	Enclosure Rating	Choose a Color		1-24	25-Up		Each		Each	Insulation		Each







				380V AC—22 amp per Circuit

				3	2	20 to 12	6	81	3	IP20	Gray	00000000	00000	00000	00000000	00000	0000000	00000	Noninsulated	00000000	00000




						600V AC—32 amp per Circuit

						1	6	22 to 12	6	87.5	1, 3	IP20	Black	00000000	00000	00000	———	0	———	0	—	———	0




								630V AC/630V DC—24 amp per Circuit

								2	2	22 to 12	5	65.5	1, 3	IP20	Beige	00000000	0000	0000	0000000	0000	00000000	0000	Insulated	00000000	00000


								2	2	22 to 12	5	65.5	1, 3	IP20	Blue	00000000	0000	0000	0000000	0000	00000000	0000	Insulated	00000000	00000
								2	2	22 to 12	5	65.5	1, 3	IP20	Gray	00000000	0000	0000	0000000	0000	00000000	0000	Insulated	00000000	00000




										800V AC—32 amp per Circuit

										2	2	22 to 12	6	65.5	1, 3	IP20	Beige , Black , Blue , Gray , Green , Orange , Red , White , Yellow	0000000	0000	0000	0000000	0000	0000000	0000	Noninsulated	0000000	00000




												800V AC/800V DC—32 amp per Circuit

												1	3	22 to 10	6	51.5	1, 3	IP20	Gray	00000000	0000	0000	00000000	0000	0000000	0000	Insulated	00000000	00000


												1	4	22 to 10	6	63.5	1, 3	IP20	Gray	00000000	0000	0000	00000000	0000	0000000	0000	Insulated	00000000	00000




														800V AC—41 amp per Circuit

														2	2	18 to 8	8	88	1, 3	IP20	Gray	00000000	0000	0000	00000000	0000	0000000	0000	Noninsulated	0000000	00000




																1,000V AC—24 amp per Circuit

																1	2	22 to 12	5	44.5	1, 3	IP20	Beige , Black , Blue , Gray , Orange , Red , White , Yellow	00000000	0000	0000	0000000	0000	0000000	0000	Noninsulated	00000000	0000




																		1,000V AC—32 amp per Circuit

1	2																	22 to 10	6	44.5	1, 3	IP20	Beige , Black , Blue , Gray , Green , Orange , Red , White , Yellow	0000000	0000	0000	0000000	0000	0000000	0000	Noninsulated	0000000	0000




		1,000V AC—41 amp per Circuit

		1	2															22 to 8	8	44.5	1, 3	IP20	Beige , Black , Blue , Gray , Green , Orange , Red , White , Yellow	0000000	0000	0000	0000000	0000	0000000	0000	Noninsulated	0000000	00000




				1,000V AC—57 amp per Circuit

				1	2													20 to 6	10	44.5	1, 3	IP20	Beige , Black , Blue , Gray , Red , White , Yellow	0000000	0000	0000	0000000	0000	0000000	0000	Noninsulated	0000000	00000




																		1,000V AC—76 amp per Circuit

						1	2											18 to 6	12	45.5	1, 3	IP20	Black , Blue , Gray , Red , White , Yellow	00000000	0000	0000	00000000	0000	0000000	0000	Noninsulated	00000000	00000




																		1,000V AC—125 amp per Circuit

																		1	2	10 to 1/0	16	49	1, 3	IP20	Black , Blue , Gray , Red , White , Yellow	00000000	0000	0000	———	0	0000000	0000	Noninsulated	00000000	00000

Markers

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	5	—	100	White	00000000	00000	00000


		1, 2	6	—	100	White	0000000	0000	0000
		1, 2	8, 10, 12, 13, 16, 22	—	100	White	00000000	0000	0000


		Numbered for Horizontal Rails



				1, 2	5	1 to 100	100	White	0000000	0000	0000


				1, 2	5	101 to 200	100	White	0000000	0000	0000
				1, 2	6	1 to 100	100	White	0000000	0000	0000
				1, 2	6	101 to 200	100	White	0000000	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1, 2	5	1 to 100	100	White	0000000	0000	0000


						1, 2	5	101 to 200	100	White	0000000	0000	0000
						1, 2	6	1 to 100	100	White	0000000	0000	0000
						1, 2	6	101 to 200	100	White	0000000	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000

Ground Terminal Blocks with Screw-Clamp Terminals

Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks											End Stops
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each



	1	2	22 to 12	5	43.5	Green/Yellow	1, 3	IP20	00000000	00000	00000	0000000	00000


	1	2	22 to 12	6	43.8	Green/Yellow	1, 3	IP20	0000000	0000	0000	0000000	0000
	1	2	22 to 8	8	43.8	Green/Yellow	1, 3	IP20	0000000	0000	0000	0000000	0000
	1	2	20 to 6	10	43.8	Green/Yellow	1, 3	IP20	0000000	0000	0000	0000000	0000
	1	2	14 to 4	12	49.5	Green/Yellow	1, 3	IP20	00000000	0000	0000	0000000	0000
	1	2	8 to 1/0	16	49	Green/Yellow	1, 3	IP20	00000000	00000	0000	0000000	0000
	1	4	22 to 10	6	63.5	Green/Yellow	1, 3	IP20	00000000	0000	0000	0000000	0000
	1	7	22 to 12	6	90	Green/Yellow	1, 3	IP20	00000000	00000	00000	00000000	0000

Markers

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	5	—	100	White	00000000	00000	00000


		1, 2	6	—	100	White	0000000	0000	0000
		1, 2	8, 10, 12, 13, 16, 22	—	100	White	00000000	0000	0000


		Numbered for Horizontal Rails



				1, 2	5	1 to 100	100	White	0000000	0000	0000


				1, 2	5	101 to 200	100	White	0000000	0000	0000
				1, 2	6	1 to 100	100	White	0000000	0000	0000
				1, 2	6	101 to 200	100	White	0000000	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1, 2	5	1 to 100	100	White	0000000	0000	0000


						1, 2	5	101 to 200	100	White	0000000	0000	0000
						1, 2	6	1 to 100	100	White	0000000	0000	0000
						1, 2	6	101 to 200	100	White	0000000	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000

Fuse Terminal Blocks with Screw-Clamp Terminals

Install a fuse in the built-in fuse holder so excess current doesn't damage your equipment. If the current exceeds the limit, the fuse will blow and cut power to connected components.

Blown Fuse Indicator—A light goes on when the fuse blows, so you can spot an overloaded circuit without cutting power or touching equipment.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

	Terminal Blocks																	Covers		End Stops		Bar Jumpers
						For Fuse										Each
	No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Trade Size	Overall Dia.	Overall Lg.	Type	Circuit Status Indicator Type	Blown Fuse Indicator Voltage	For DIN Rail Trade Size	Enclosure Rating	Choose a Color		1-24	25-Up		Each		Each	Insulation		Each







				300V AC/300V DC—6.3 amp per Circuit

				2 1 (Ground)	2 1 (Ground)	20 to 12	8	99	—	5 mm	20 mm	Ceramic, Glass	—	—	3	IP20	Gray	00000000	000000	000000	00000000	00000	00000000	00000	Noninsulated	0000000	000000


				2 1 (Ground)	2 1 (Ground)	20 to 12	8	99	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	24V DC 60V DC 110V AC	3	IP20	Gray	00000000	00000	00000	00000000	0000	00000000	0000	Noninsulated	0000000	00000
				2 1 (Ground)	2 1 (Ground)	20 to 12	8	99	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	110V AC 230V AC	3	IP20	Gray	00000000	00000	00000	00000000	0000	00000000	0000	Noninsulated	0000000	00000




						400V AC/400V DC—6.3 amp per Circuit

						1	2	22 to 12	8	56	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	24V AC 24V DC	1, 3	IP20	Gray	00000000	00000	00000	0000000	0000	0000000	0000	—	———	0


						1	2	22 to 12	8	56	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	110V AC 230V AC	1, 3	IP20	Gray	00000000	00000	00000	0000000	0000	0000000	0000	—	———	0




								600V AC—6.3 amp per Circuit

								2	2	24 to 12	8	85.5	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	110V AC 230V AC	1, 3	IP20	Gray	00000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	00000


								2	2	12	8	85.5	—	5 mm	20 mm	Ceramic, Glass	Blown Fuse	24V AC 24V DC	1, 3	IP20	Gray	00000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	00000




										630V AC—6.3 amp per Circuit

										1	2	22 to 12	8	56	—	5 mm	20 mm	Ceramic, Glass	—	—	1, 3	IP20	Gray , Orange	0000000	0000	0000	0000000	0000	0000000	0000	—	———	0




												630V AC/630V DC—6.3 amp per Circuit

												2	2	24 to 12	8	85.5	—	5 mm	20 mm	Ceramic, Glass	—	—	1, 3	IP20	Gray	00000000	00000	00000	00000000	0000	00000000	0000	Insulated	00000000	00000




														800V AC/800V DC—10 amp per Circuit

														1	2	22 to 10	13	85.1	3AG	1/4"	—	Glass	Blown Fuse	24V AC 24V DC	1, 3	IP20	Black	00000000	00000	00000	0000000	0000	0000000	0000	—	———	0


														1	2	22 to 10	13	85.1	3AG	1/4"	—	Glass	Blown Fuse	110V AC 230V AC	1, 3	IP20	Black	00000000	00000	00000	0000000	0000	0000000	0000	—	———	0




																800V AC—16 amp per Circuit

1																2	22 to 10	13	85.1	3AG	1/4"	—	Glass	—	—	1, 3	IP20	Black	0000000	00000	0000	0000000	0000	0000000	0000	—	———	0




		800V AC—30 amp per Circuit

		1	2													18 to 6	22	90.7	—	13/32"	1 1/2"	Cartridge	—	—	1, 3	IP20	Gray	00000000	00000	00000	———	0	0000000	0000	—	———	0

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	8, 10, 12, 13, 16, 22	—	100	White	00000000	00000	00000


		Numbered for Horizontal Rails



				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000


				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000


						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000

Disconnect Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Disconnect Terminal Blocks with Screw-Clamp Terminals.

Test and troubleshoot circuits without removing any wire. Flip the tab by hand or with a screwdriver to open and close the circuit.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Adjacent Jumpers—Metal poles create an electrical connection between adjacent terminal blocks, so you can connect multiple components with a single wire. Blocks must be the same width for the jumpers to fit.

Terminal Blocks											Covers		End Stops		Adjacent Jumpers
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each	Insulation		Each







			320V AC/320V DC—10 amp per Circuit

			1	2	12	5	44.5	Gray/Orange	1, 3	IP20	00000000	00000	00000	0000000	00000	0000000	00000	Noninsulated	00000000	00000




					400V AC—15 amp per Circuit

					1	2	22 to 10	8	47	Gray	1, 3	IP20	0000000	0000	0000	00000000	0000	0000000	0000	Insulated	00000000	0000




							400V AC—20 amp per Circuit

							1	2	22 to 10	6	44.5	Gray	1, 3	IP20	0000000	0000	0000	00000000	0000	0000000	0000	Insulated	00000000	0000

Markers

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	5	—	100	White	00000000	00000	00000


		1, 2	6	—	100	White	0000000	0000	0000
		1, 2	8, 10, 12, 13, 16, 22	—	100	White	00000000	0000	0000


		Numbered for Horizontal Rails



				1, 2	5	1 to 100	100	White	0000000	0000	0000


				1, 2	5	101 to 200	100	White	0000000	0000	0000
				1, 2	6	1 to 100	100	White	0000000	0000	0000
				1, 2	6	101 to 200	100	White	0000000	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1, 2	5	1 to 100	100	White	0000000	0000	0000


						1, 2	5	101 to 200	100	White	0000000	0000	0000
						1, 2	6	1 to 100	100	White	0000000	0000	0000
						1, 2	6	101 to 200	100	White	0000000	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000

Disconnect Terminal Blocks with Test Sockets and Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Disconnect Terminal Blocks with Test Sockets and Screw-Clamp Terminals.

Plug voltage meters into the built-in sockets to confirm the voltage is right for your application. You can also test and troubleshoot circuits without removing any wire. Push, turn, and release the knob to break your connection. When the knob is released, stick a wire through the hole so you can't accidentally reconnect the circuit—similar to a lockout tag.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks											Covers		End Stops		Adjacent Jumpers			Test Plugs
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each	Insulation		Each		Each







			500V AC/500V DC—15 amp per Circuit

			1	2	22 to 8	8	55.5	Gray/Black	1, 3	IP10	00000000	00000	00000	00000000	00000	0000000	00000	Insulated	00000000	00000	00000000	00000


			1	2	22 to 8	8	55.5	Gray/Red	1, 3	IP10	00000000	0000	0000	00000000	0000	0000000	0000	Insulated	00000000	0000	00000000	0000
			1	2	22 to 8	8	55.5	Gray/Yellow	1, 3	IP10	00000000	0000	0000	00000000	0000	0000000	0000	Insulated	00000000	0000	00000000	0000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	8, 10, 12, 13, 16, 22	—	100	White	00000000	00000	00000


		Numbered for Horizontal Rails



				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000


				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000


						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000

Thermocouple Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Modular DIN-Rail Mount Terminal Blocks, Thermocouple Terminal Blocks with Screw-Clamp Terminals.

Run your thermocouple wire into these blocks so no signal is lost or destroyed. The metal in the terminals is compatible with multiple thermocouple wire types.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks												Covers		End Stops
										Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	For Thermocouple Wire Type	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each







			500V AC/500V DC

			1	2	24 to 2	6	44.5	J, K, T	Gray	1, 3	IP20	00000000	000000	000000	0000000	00000	0000000	00000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	6	—	100	White	0000000	00000	00000


		Numbered for Horizontal Rails



				1, 2	6	1 to 100	100	White	0000000	0000	0000


				1, 2	6	101 to 200	100	White	0000000	0000	0000


				Numbered for Vertical Rails



						1, 2	6	1 to 100	100	White	0000000	0000	0000


						1, 2	6	101 to 200	100	White	0000000	0000	0000

Quick-Connect Terminal Blocks

Snap wire into place with a clamp instead of fussing with a screw. Release the spring clamp with a screwdriver, insert the wire, and push the clamp back down for a secure hold. For an easier fit in the small gaps in the block, attach a ferrule, pin terminal, or blade terminal before installing.

DIN Rail Mounting Adapters—Install terminal blocks on DIN 3 rail with these mounting brackets. You can mount two-circuit terminal blocks with one adapter. For all other blocks, you'll need two.

Terminal Blocks																DIN Rail Mounting Adapters
										Mounting Holes		Black		White
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wire Connection	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Max. Temp., ° F	For DIN Rail Trade Size	Dia.	No. of		Each		Each		Each
2	4	20 to 12	Spring-Clamp Terminal	1/2"	15/16"	7/8"	1 3/8"	221	3	0.13"	1	0000000	00000	0000000	00000	000000	00000
3	4	20 to 12	Spring-Clamp Terminal	1/2"	1 7/16"	7/8"	1 3/8"	221	3	0.13"	2	0000000	0000	0000000	0000	000000	0000
4	4	20 to 12	Spring-Clamp Terminal	1/2"	1 7/8"	7/8"	1 3/8"	221	3	0.13"	3	0000000	0000	0000000	0000	000000	0000
5	4	20 to 12	Spring-Clamp Terminal	1/2"	2 3/8"	7/8"	1 3/8"	221	3	0.13"	4	0000000	0000	0000000	0000	000000	0000

Space-Saving Circuit Board Terminal Blocks

Streamline wiring on small or crowded circuit boards. These terminal blocks connect the same number of circuits as larger blocks in about half the space. Pins on the bottom are spaced to match the layout of circuit boards. Solder them onto your board for a secure hold.

The screw-clamp terminals flatten your wire so it stays put when vibrated or pulled. For an even stronger and more conductive connection, crimp a terminal or wire ferrule onto the end of the wire.

								Pin
No. of Circuits	For Wire Ga.	Wire Connection	Terminal Size	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Lg.	Material	Max. Temp., ° F	Color	Pkg. Qty.		Pkg.







			300V AC—15 amp per Circuit

			2	22 to 12	Screw-Clamp Terminal	M3	3/16"	3/8"	3/8"	9/16"	0.12"	Tin-Plated Nickel	220	Black	10	0000000	00000


			3	22 to 12	Screw-Clamp Terminal	M3	3/16"	5/8"	3/8"	9/16"	0.12"	Tin-Plated Nickel	220	Black	10	0000000	00000
			4	22 to 12	Screw-Clamp Terminal	M3	3/16"	13/16"	3/8"	9/16"	0.12"	Tin-Plated Nickel	220	Black	10	0000000	00000
			5	22 to 12	Screw-Clamp Terminal	M3	3/16"	1"	3/8"	9/16"	0.12"	Tin-Plated Nickel	220	Black	10	0000000	00000
			6	22 to 12	Screw-Clamp Terminal	M3	3/16"	1 3/16"	3/8"	9/16"	0.12"	Tin-Plated Nickel	220	Black	5	0000000	00000
			8	22 to 12	Screw-Clamp Terminal	M3	3/16"	1 5/8"	3/8"	9/16"	0.12"	Tin-Plated Nickel	220	Black	5	0000000	00000

High-Temperature Terminal Blocks

These ceramic terminal blocks keep their shape and strength at temperatures up to 1,200° F—over four times higher than standard blocks. Mount them to surfaces in ovens, kilns, and other heat-generating equipment.

											Mounting Holes
No. of Circuits	For Wire Ga.	Wire Connection	Terminal Size	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Max. Temp., ° F	Material	Color	Dia.	No. of		Each







			300V AC/300V DC—20 amp per Circuit

			1	24 to 12	Screw Terminal	M3	—	7/16"	15/16"	3/4"	1,200	Ceramic	White	—	—	0000000	00000


			2	24 to 12	Screw Terminal	M3	5/16"	11/16"	15/16"	3/4"	1,200	Ceramic	White	—	—	0000000	0000
			2	24 to 12	Screw Terminal	M3	1/2"	15/16"	15/16"	3/4"	1,200	Ceramic	White	0.14"	2	0000000	0000
			3	24 to 12	Screw Terminal	M3	5/16"	1"	15/16"	3/4"	1,200	Ceramic	White	—	—	0000000	0000
			3	24 to 12	Screw Terminal	M3	1/2"	1 7/16"	15/16"	3/4"	1,200	Ceramic	White	0.14"	2	0000000	0000




					300V AC/300V DC—30 amp per Circuit

					1	22 to 10	Screw Terminal	M4	—	1/2"	1"	3/4"	1,200	Ceramic	White	—	—	0000000	0000


					2	22 to 10	Screw Terminal	M4	9/16"	1"	1"	3/4"	1,200	Ceramic	White	0.14"	2	0000000	0000
					3	22 to 10	Screw Terminal	M4	9/16"	1 5/8"	1"	3/4"	1,200	Ceramic	White	0.14"	2	0000000	0000
					4	22 to 10	Screw Terminal	M4	5/16"	1 9/16"	13/16"	5/8"	1,200	Ceramic	White	0.14"	1	0000000	0000




							300V AC/300V DC—65 amp per Circuit

							2	18 to 6	Screw Terminal	M4	11/16"	1 1/4"	1 1/8"	15/16"	1,200	Ceramic	White	0.14"	2	0000000	0000


							3	18 to 6	Screw Terminal	M4	11/16"	1 7/8"	1 1/16"	15/16"	1,200	Ceramic	White	0.14"	2	0000000	0000




									600V AC/600V DC—20 amp per Circuit

									2	20 to 12	Screw-Clamp Terminal	No. 8	7/8"	1 9/16"	1 1/4"	13/16"	840	Ceramic	Beige	0.19"	1	0000000	00000


									3	20 to 12	Screw-Clamp Terminal	No. 8	7/8"	2 7/16"	1 1/4"	13/16"	840	Ceramic	Beige	0.19"	2	0000000	00000

Space-Saving Modular DIN-Rail Mount Terminal Blocks

These handle the same voltage and power as our other modular blocks while taking up about half the vertical space. Snap them onto DIN 2 rail (also known as mini rail), which is lower in height than DIN 3 rail.

The screw-clamp or spring-clamp terminals flatten your wire so it stays put when vibrated or pulled. For an even stronger and more conductive connection, crimp a terminal or wire ferrule onto the end of the wire.

Mix and match blocks to get the exact number of circuits you need in a single setup. Add terminal blocks for fuses and grounding wire as needed. The blocks clip side by side onto DIN rail in control panels, creating tidy rows of circuits that you can identify and access on the spot.

Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Terminal Blocks with Screw-Clamp Terminals.

A screw presses the clamp onto the wire for a secure hold.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Noninsulated—Terminal blocks with noninsulated jumpers lose their IP20 rating for touch protection because the jumpers introduce exposed metal to the circuit.

Terminal Blocks											Covers		End Stops		Bar Jumpers
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	For DIN Rail Trade Size	Enclosure Rating	Choose a Color		1-24	25-Up		Each		Each	Insulation		Each







			250V AC—20 amp per Circuit

			1	2	28 to 12	5	27.5	2	IP20	Gray	0000000	00000	00000	0000000	00000	0000000	00000	Noninsulated	0000000	000000




					500V AC—17.5 amp per Circuit

					1	2	24 to 16	4	28	2	IP20	Gray	00000000	0000	0000	00000000	0000	0000000	0000	Noninsulated	00000000	00000




							500V AC—30 amp per Circuit

							1	2	22 to 12	6	28	2	IP20	Blue , Gray	0000000	0000	0000	00000000	0000	0000000	0000	Noninsulated	0000000	00000

Markers

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1	4	—	100	White	00000000	00000	00000


		1	5	—	100	White	00000000	0000	0000
		1	6	—	100	White	00000000	0000	0000


		Numbered for Horizontal Rails



				1	4	1 to 100	100	White	00000000	0000	0000


				1	5	1 to 100	100	White	00000000	0000	0000
				1	5	101 to 200	100	White	00000000	0000	0000
				1	6	1 to 100	100	White	00000000	0000	0000
				1	6	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1	4	1 to 100	100	White	00000000	0000	0000


						1	4	101 to 200	100	White	00000000	0000	0000
						1	5	1 to 100	100	White	00000000	0000	0000
						1	5	101 to 200	100	White	00000000	0000	0000
						1	6	1 to 100	100	White	00000000	0000	0000
						1	6	101 to 200	100	White	00000000	0000	0000

Terminal Blocks with Spring-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Terminal Blocks with Spring-Clamp Terminals.

Instead of fussing with screws, flip the lever to clamp your wire into the terminal.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks											Covers		End Stops		Bar Jumpers
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each	Insulation		Each







			600V AC/600V DC—24 amp per Circuit

			1	2	26 to 12	5	33	Gray	2	IP20	00000000	00000	00000	0000000	00000	0000000	00000	Insulated	0000000	000000


			1	4	26 to 12	10	33	Gray	2	IP20	00000000	0000	0000	0000000	0000	0000000	0000	Insulated	0000000	00000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1	5	—	100	White	00000000	00000	00000


		1, 2	8, 10, 12, 13, 16, 22	—	100	White	00000000	0000	0000


		Numbered for Horizontal Rails



				1	5	1 to 100	100	White	00000000	0000	0000


				1	5	101 to 200	100	White	00000000	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000
				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1	5	1 to 100	100	White	00000000	0000	0000


						1	5	101 to 200	100	White	00000000	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000
						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000

Ground Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Ground Terminal Blocks with Screw-Clamp Terminals.

Connect grounding wire to DIN rail so fault currents can safely flow to ground. These terminal blocks should only be used for grounding circuits.

A screw presses the clamp onto the wire for a secure hold.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks											Covers		End Stops
									Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each



	1	2	22 to 12	6	28	Green/Yellow	2	IP20	0000000	00000	00000	00000000	00000	0000000	00000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1	6	—	100	White	00000000	00000	00000


		Numbered for Horizontal Rails



				1	6	1 to 100	100	White	00000000	0000	0000


				1	6	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1	6	1 to 100	100	White	00000000	0000	0000


						1	6	101 to 200	100	White	00000000	0000	0000

Fuse Terminal Blocks with Screw-Clamp Terminals

Image of Product. Front orientation. Terminal Blocks. Space-Saving Modular DIN-Rail Mount Terminal Blocks, Fuse Terminal Blocks with Screw-Clamp Terminals.

Install a fuse in the built-in fuse holder so excess current doesn't damage your equipment. If the current exceeds the limit, the fuse will blow and cut power to connected components.

A screw presses the clamp onto the wire for a secure hold.

Covers—Snap onto the exposed side of a terminal block to prevent accidental contact with a live wire.

End Stops—Mount at the end of a group of terminal blocks so they don't slide when vibrated or bumped.

Terminal Blocks														Covers		End Stops
					For Fuse							Each
No. of Circuits	No. of Terminals per Circuit	For Wire Ga.	Wd., mm	Ht., mm	Overall Dia., mm	Overall Lg., mm	Type	Color	For DIN Rail Trade Size	Enclosure Rating		1-24	25-Up		Each		Each







			630V AC—6.3 amp per Circuit

			1	2	18 to 12	8	59.5	5	20	Ceramic, Glass	Gray	2	IP20	0000000	00000	00000	0000000	00000	0000000	00000

Markers


Blank	Numbered for Horizontal Rails	Numbered for Vertical Rails

Label your terminal block connections so you can identify them at a glance.

							Each
	For No. of Circuits	For Terminal Block Wd., mm	Number Range	Markers per Card	Color		1-24	25-Up
Blank



		1, 2	8, 10, 12, 13, 16, 22	—	100	White	00000000	00000	00000


		Numbered for Horizontal Rails



				1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000


				1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000


				Numbered for Vertical Rails



						1, 2	8, 10, 12, 13, 16, 22	1 to 100	100	White	00000000	0000	0000


						1, 2	8, 10, 12, 13, 16, 22	101 to 200	100	White	00000000	0000	0000

Touch-Safe Plug-and-Socket Terminal Blocks

These terminal blocks cut power when you pull the plug while protecting you from shocks. The terminals are recessed, so you can't accidentally touch them when installing or adjusting wire. You can wire the plug away from the block, then attach it to the socket you've already installed. Blocks can be cut into smaller sections. You'll need one plug and one socket for a complete terminal block.

You can screw down your stripped wire directly or attach a terminal to prevent damage from the screw. Ring, spade, and hook terminals fit around the screw and hang on tightly, even in high-vibration setups. Pin terminals, blade terminals, and wire ferrules are easier to fit into the block, but they don't stay put as well as other terminals when vibrated or pulled.

											Mounting Holes
	No. of Circuits	For Wire Ga.	Wire Connection	Terminal Size	Terminal Ctr.-to-Ctr.	Lg.	Wd.	Ht.	Max. Temp., ° F	Color	Dia.	No. of		Each
Plugs
Plug






				600V AC/600V DC—20 amp per Circuit

				2	24 to 10	Screw Terminal	M3	3/8"	5/8"	9/16"	3/4"	221	White	0.12"	1	00000000	00000


				4	24 to 10	Screw Terminal	M3	3/8"	1 7/16"	9/16"	3/4"	221	White	0.12"	3	00000000	0000
				6	24 to 10	Screw Terminal	M3	3/8"	2 1/4"	9/16"	3/4"	221	White	0.12"	5	00000000	0000
				8	24 to 10	Screw Terminal	M3	3/8"	3"	9/16"	3/4"	221	White	0.12"	7	00000000	0000
				10	24 to 10	Screw Terminal	M3	3/8"	3 13/16"	9/16"	3/4"	221	White	0.12"	9	00000000	0000
				12	24 to 10	Screw Terminal	M3	3/8"	4 5/8"	9/16"	3/4"	221	White	0.12"	11	00000000	0000


				Sockets
				Socket






								600V AC/600V DC—20 amp per Circuit

								2	24 to 10	Screw Terminal	M3	3/8"	5/8"	13/16"	3/4"	221	White	0.14"	1	00000000	0000


								4	24 to 10	Screw Terminal	M3	3/8"	1 7/16"	13/16"	3/4"	221	White	0.14"	3	00000000	0000
								6	24 to 10	Screw Terminal	M3	3/8"	2 1/4"	13/16"	3/4"	221	White	0.14"	5	00000000	0000
								8	24 to 10	Screw Terminal	M3	3/8"	3"	13/16"	3/4"	221	White	0.14"	7	00000000	0000
								10	24 to 10	Screw Terminal	M3	3/8"	3 13/16"	13/16"	3/4"	221	White	0.14"	9	00000000	0000
								12	24 to 10	Screw Terminal	M3	3/8"	4 5/8"	13/16"	3/4"	221	White	0.14"	11	00000000	0000

Modular Distribution Bars

Build your own distribution system for neutral and grounding applications by adding terminal blocks to these bars. Slide blocks onto the bar, also known as a bus bar, and then attach mounting brackets to the bar. All wires make contact with the bar, distributing the current among the terminal blocks.

Terminal Blocks

Terminal blocks have screw-clamp terminals that secure the wire as well as the block to the bar. Blocks are UL recognized for grounding applications.

Terminal Blocks										Terminal Block Markers
No. of Circuits	For Wire Ga.	Wire Connection	Wd., mm	Lg., mm	Ht., mm	Certification	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
1	22, 20, 18, 16, 14, 12, 10	Screw-Clamp Terminal	7.5	30	23.3	UL Recognized Component	5	0000000	00000	100	0000000	00000
1	10, 8, 6, 4	Screw-Clamp Terminal	9.8	36	23.3	UL Recognized Component	5	0000000	0000	100	0000000	0000
1	8, 6, 4, 2	Screw-Clamp Terminal	14.5	45	27.3	UL Recognized Component	5	0000000	00000	100	0000000	0000