These rolls are coated with aluminum oxide, which is the most common abrasive material and hard enough to sand steel and wood.

A thicker, heavier construction than standard rolls withstands tough sanding.

Sanding rolls with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina rolls because of their sharp, outwardly pointed grit.

The soft abrasive is good for fine hand-polishing of metal surfaces that require the smoothest finish possible after an abrasive sequence. Also known as crocus cloth.

Create smooth finishes on wood with these garnet sheets.

The soft abrasive is good for fine hand-polishing of soft nonferrous metals. Also known as crocus cloth.

These rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.

The thick, abrasive-embedded nylon mesh construction flexes to compensate for uneven pressure as you sand, producing a consistent finish.

When you need to achieve a more consistent finish, choose nylon mesh sanding rolls over paper- or cloth-backed rolls.

Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes.

A cushioned layer lets you apply more even sanding pressure on your workpiece, creating finer and more consistent finishes.

The long sides of these sponges are angled to get into corners and edges that a flat sponge might miss.

Keep a selection of flat and angled sponges with various grits on hand.

These cut-to-length rolls resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding. A layer of mesh lets sanding dust and debris escape during use, preventing material buildup on the abrasive surface.

The dental floss of abrasives, these cords slip into areas that other forms cannot. They're good for deburring and polishing small holes, narrow slots, keyways, and grooves.

The mesh in these sanding pads flexes to compensate for uneven pressure as you sand, producing a consistent finish.

When you need to achieve a more consistent finish, choose nylon mesh rolls over paper- or cloth-backed rolls.

Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have a long-lasting diamond abrasive on one side.

Cut the length you need, then stick to your sanding tool. When it's time to change the sheet, peel it off.

Sanding rolls with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina rolls because of their sharp, outwardly pointed grit.

Create consistent finishes on stainless steel, titanium, steel, iron, and nickel.

Quickly attach, remove, and reuse.

Dozens of vacuum holes throughout these rolls let a sander suck up dust and debris to prevent buildup on your sandpaper. They’re coated with the most common abrasive, aluminum oxide, which is hard enough to sand steel and wood.

Cut to convenient sizes and shapes, these fit most sheet sanders.

A coating prevents dust and debris from building up on the abrasive surface.

Easy to attach and remove, these sheets grip the surface of your vacuum detail sander. Vacuum holes allow dust to get sucked up before it can build up and dull the abrasive surface.

Peel and stick to your file handle. When it’s time to change the sheet, peel it off.

Dust and debris won't build up on the abrasive surface.

Stick these sheets to a hand sanding block for a more secure grip than hook and loop sanding sheets.

The mesh backing lets sanding dust and debris escape during use, preventing material build up on the abrasive surface.

Dust and debris won’t build up on these sheets as you finish ceilings and walls. Pair them with pole sanders.

The abrasive-embedded nylon mesh construction gives you more control over sanding pressure.

Get twice the life over standard nylon mesh cushioned discs—the flexible mesh in these discs is embedded with a premium form of aluminum oxide or ceramic alumina.

The nylon mesh on these discs is embedded with precision-shaped ceramic alumina, which cuts through hard metals like stainless steel faster than other forms of ceramic alumina because of its sharp, outwardly pointed grit.

The premium abrasive stays sharp longer.

These discs have a harder abrasive than standard quick-change discs.

The outer 3/8" of these discs is extremely flexible to prevent marring or gouging your work when sanding a radius or contour.

Quickly remove large amounts of material—discs with precision-shaped ceramic alumina abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

The heavy duty construction provides more support than standard discs for heavy material removal.

When you need to achieve a more consistent finish, choose nylon mesh sanding discs over paper- or cloth-backed discs.

Press onto a compatible sanding tool or backup pad; peel off to remove.

Coated with zirconia alumina to stay sharper longer.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The premium abrasive stays sharp longer.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

For use with vacuum sanders, these discs have holes that allow dust to get sucked up before it can build up and dull the abrasive surface.

Holes allow dust removal when used with a vacuum sander.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

Quickly sand while capturing up to 97% of the dust generated.

For use with vacuum sanders, these discs have holes that allow dust to get sucked up before it can build up and dull the abrasive surface.

The nylon mesh on these discs is embedded with precision-shaped ceramic alumina, which cuts through hard metals like stainless steel faster than other forms of ceramic alumina because of its sharp, outwardly pointed grit.

These discs are abrasive-embedded cloth with a cushioned layer.

Quickly attach, remove, and reuse these discs with a compatible sanding tool or backup pad.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

The cushioned construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Holes allow dust removal when used with a vacuum sander.

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Nylon mesh is embedded with precision-shaped ceramic alumina, which cuts through hard metals like stainless steel faster than other forms of ceramic alumina because of its sharp, outwardly pointed grit.

Fit these discs over your tool's arbor.

The premium abrasive stays sharp longer.

With more flaps than standard discs, these last 30-40% longer.

With more flaps than standard discs, these last 30-40% longer.

When you need to achieve a more consistent finish, choose nylon mesh sanding discs over paper- or cloth-backed discs.

Replace your sanding discs less often—the backing plate on these discs can be trimmed off as the abrasive flaps wear down, allowing you to use more of the disc.

Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.

A coating prevents dust and debris from building up on the abrasive surface.

The zirconia alumina grit on these discs continually fractures to produce new, sharp cutting edges that aggressively remove material from steel and wood.

Set at an angle and widely spaced, the flaps reach into corners.

The abrasive-embedded mesh construction gives you more control over sanding pressure, creating finer and more consistent finishes.

Sand both flat and irregularly shaped workpieces without gouging or leaving behind streaks.