Class A, B, and C Fire Extinguishers
Paper, Cloth,
and Rubber
B—Liquids
and Gases
Handle the three most common types of fire—those involving wood and paper, liquids and gases, and electrical equipment. The UL rating for Class A and B extinguishers includes a number; the higher the number, the greater the firefighting capability. Extinguishers have a safety pin to prevent accidental discharge. Please check local ordinances for inspection requirements (inspection tags sold separately).
Wet chemical (Halotron) extinguishers don’t leave a residue behind. Good for use around electrical equipment. They cannot be sold to Canada due to local chemical regulations.
Extinguishers | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Bracket | Replacement Mounting Brackets | ||||||||||||||
| UL Rating | Capacity, lbs. | Discharge Time, sec. | Mounting Location | Dia. | Ht. | Charged or Empty | Fasteners Included | No. of Holes | Hole Dia. | Includes | Cannot Be Sold To | Each | Each | ||
Dry Chemical | |||||||||||||||
| 1-A, 10-B, C | 2 1/2 | 9 | Vehicle | 3 3/8" | 14 3/4" | Charged | No | 4 | 7/32" | Mounting Bracket, Pressure Gauge, Safety Pin | __ | 0000000 | 000000 | 0000000 | 000000 |
| 3-A, 40-B, C | 5 | 14 | Surface | 4 1/4" | 16 3/8" | Charged | No | 1 | 5/16" | Mounting Bracket, Pressure Gauge, Safety Pin | __ | 0000000 | 00000 | 0000000 | 0000 |
| 3-A, 40-B, C | 5 | 14 | Vehicle | 4 1/4" | 16 3/8" | Charged | No | 4 | 7/32" | Mounting Bracket, Pressure Gauge, Safety Pin | __ | 0000000 | 00000 | 0000000 | 00000 |
| 4-A, 80-B, C | 10 | 22 | Surface | 5 1/8" | 21" | Charged | No | 1 | 5/16" | Mounting Bracket, Pressure Gauge, Safety Pin | __ | 000000 | 000000 | 0000000 | 0000 |
| 10-A, 120-B, C | 20 | 27 | Surface | 7 1/2" | 21 1/4" | Charged | No | 1 | 5/16" | Mounting Bracket, Pressure Gauge, Safety Pin | __ | 0000000 | 000000 | 0000000 | 0000 |
| 10-A, 160-B, C | 30 | 32 | Surface | 7 1/2" | 27 3/8" | Charged | No | 1 | 5/16" | Mounting Bracket, Pressure Gauge, Safety Pin | __ | 0000000 | 000000 | 0000000 | 0000 |
Wet Chemical (Halotron) | |||||||||||||||
| 1-A, 10-B, C | 11 | 9 | Surface | 7" | 17 1/2" | Charged | No | 1 | 5/16" | Mounting Bracket, Pressure Gauge, Safety Pin | Canada | 00000000 | 000000 | 0000000 | 0000 |
| 2-A, 10-B, C | 15 | 13 | Surface | 7" | 17 1/2" | Charged | No | 1 | 5/16" | Mounting Bracket, Pressure Gauge, Safety Pin | Canada | 00000000 | 00000000 | 0000000 | 0000 |
Class B and C Fire Extinguishers
B—Liquids
and Gases
Fight flammable liquid, gas, grease, and electrical fires. The UL rating for Class B extinguishers includes a number; the higher the number, the greater the firefighting capability. Extinguishers have a safety pin to prevent accidental discharge. Please check local ordinances for inspection requirements (inspection tags sold separately).
Wet chemical (Halotron) extinguishers don’t leave a residue behind. Good for use around electrical equipment. They cannot be sold to Canada due to local chemical regulations.
Carbon dioxide extinguishers won't corrode electrical equipment and are a good alternative to Halotron extinguishers.
Dry chemical (Purple K) extinguishers are the most effective in fighting Class B fires and are commonly used in garages and fuel transfer areas.
Extinguishers | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Bracket | Replacement Mounting Brackets | |||||||||||||||
| UL Rating | Capacity, lbs. | Discharge Time, sec. | Mounting Location | Dia. | Ht. | Charged or Empty | Fasteners Included | Number of Holes | Hole Dia. | Includes | Specifications Met | Cannot Be Sold To | Each | Each | ||
Wet Chemical (Halotron) | ||||||||||||||||
| 2-B, C | 2 1/2 | 9 | Surface | 3 3/8" | 13 3/8" | Charged | No | 1 | 5/16" | Mounting Bracket, Safety Pin | __ | Canada | 00000000 | 0000000 | 0000000 | 00000 |
Carbon Dioxide | ||||||||||||||||
| 5-B, C | 5 | 9 | Surface | 5 1/4" | 17 3/8" | Charged | No | 1 | 5/16" | Mounting Bracket, Safety Pin | D.O.T. Compliant 49 CFR 173.309 | __ | 0000000 | 000000 | 0000000 | 0000 |
| 10-B, C | 10 | 9 | Surface | 6 7/8" | 19 3/4" | Charged | No | 1 | 5/16" | Mounting Bracket, Safety Pin | D.O.T. Compliant 49 CFR 173.309 | __ | 0000000 | 000000 | 0000000 | 0000 |
| 10-B, C | 15 | 15 | Surface | 6 7/8" | 26 3/8" | Charged | No | 1 | 5/16" | Mounting Bracket, Safety Pin | D.O.T. Compliant 49 CFR 173.309 | __ | 0000000 | 000000 | 0000000 | 0000 |
Dry Chemical (Purple K) | ||||||||||||||||
| 20-B, C | 5 | 9 | Surface | 4 1/4" | 16 3/8" | Charged | No | 1 | 5/16" | Mounting Bracket, Pressure Gauge, Safety Pin | US Coast Guard Approved | __ | 0000000 | 000000 | 0000000 | 0000 |
| 20-B, C | 5 | 9 | Vehicle | 4 1/4" | 16 3/8" | Charged | No | 4 | 7/32" | Mounting Bracket, Pressure Gauge, Safety Pin | US Coast Guard Approved | __ | 0000000 | 000000 | 0000000 | 00000 |
| 80-B, C | 10 | 22 | Surface | 5 1/8" | 21" | Charged | No | 1 | 5/16" | Mounting Bracket, Pressure Gauge, Safety Pin | US Coast Guard Approved | __ | 0000000 | 000000 | 0000000 | 0000 |
| 120-B, C | 20 | 27 | Surface | 7 1/2" | 21 1/4" | Charged | No | 1 | 5/16" | Mounting Bracket, Pressure Gauge, Safety Pin | US Coast Guard Approved | __ | 0000000 | 000000 | 0000000 | 0000 |
Class A Fire Extinguishers
Paper, Cloth,
and Rubber
Douse fires from combustibles such as wood, paper, cloth, and rubber. Extinguisher comes empty. Fill it with water and pressurize using a compressed air or nitrogen source with a 100 psi capacity. It has a 5/16"-32 UNEF male Schrader fitting for pressurizing and a pressure gauge. Extinguisher has a safety pin to prevent accidental discharge. Please check local ordinances for inspection requirements (inspection tags sold separately).
Extinguisher | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Bracket | Replacement Mounting Bracket | |||||||||||||
| UL Rating | Extinguisher Type | Capacity, gal. | Discharge Time, sec. | Mounting Location | Dia. | Ht. | Charged or Empty | Fasteners Included | Hole Dia. (Qty.) | Includes | Each | Each | ||
| 2-A | Water | 2 1/2 | 55 | Surface | 7" | 24 1/2" | Empty | No | 7/32" (2), 11/32" (1) | 5/16"-32 UNEF Male Schrader Fitting, Mounting Bracket, Pressure Gauge, Safety Pin | 000000 | 0000000 | 000000 | 00000 |
Class D Fire Extinguishers
Smother flames from combustible-metal fires involving magnesium, sodium, potassium, uranium, and powdered aluminum. Extinguisher has a safety pin to prevent accidental discharge. Please check local ordinances for inspection requirements (inspection tags sold separately).
Extinguishers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bracket | Replacement Mounting Brackets | |||||||||||||
| Extinguisher Type | Capacity, lbs. | Discharge Time, sec. | Mounting Location | Dia. | Ht. | Charged or Empty | Cylinder Color | Fasteners Included | Hole Dia. (Qty.) | Includes | Each | Each | ||
| Dry Chemical | 30 | 24 | Surface | 8" | 35" | Charged | Yellow | No | 7/32" (2); 11/32" (1) | Mounting Bracket, Pressure Gauge, Safety Pin | 0000000 | 0000000 | 0000000 | 00000 |
Class K Fire Extinguishers
Kitchen
Fires
Suppress extremely hot reflashing fires involving combustible oil and grease. Extinguisher has a safety pin to prevent accidental discharge. Please check local ordinances for inspection requirements (inspection tags sold separately).
Extinguishers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mounting Bracket | Replacement Mounting Brackets | |||||||||||||
| Extinguisher Type | Capacity, gal. | Discharge Time, sec. | Mounting Location | Dia. | Ht. | Charged or Empty | Fasteners Included | Hole Dia. (Qty.) | Includes | Specifications Met | Each | Each | ||
| Wet Chemical | 1 3/5 | 55 | Surface | 7" | 19 1/2" | Charged | No | 7/32" (2), 5/16" (1) | Mounting Bracket, Pressure Gauge, Safety Pin | UL Listed | 0000000 | 0000000 | 0000000 | 00000 |
Fire Sprinkler Heads
Sprinkler heads must be installed and maintained according to National Fire Protection Association (NFPA) standards. Install using sprinkler-head wrenches (sold separately) or any hand wrench that fits the NPT size.
Pendent-style sprinkler heads are designed to be suspended below support piping. They can be used with exposed piping or finished ceilings.
Upright-style sprinkler heads are designed to be installed above support piping and can only be used with exposed piping.
Glass-bulb sprinkler heads are triggered when the liquid-filled bulb bursts at the rated temperature.
Fusible-link sprinkler heads are triggered by a soft metal alloy that melts at the rated temperature.
Temperature | ||||||||
|---|---|---|---|---|---|---|---|---|
| Rating, ° F | Color Code | Max. Pressure, psi | Material | Specifications Met | Choose a Style | Flow Rate | Each | |
1/2 NPT Male Connection | ||||||||
Glass Bulb | ||||||||
| 155° | Red | 175 | Brass | FM Approved, UL Listed | 74 gpm @ 175 psi | 00000000 | 000000 | |
| 175° | Yellow | 175 | Brass | FM Approved, UL Listed | 74 gpm @ 175 psi | 00000000 | 00000 | |
| 200° | Green | 175 | Brass | FM Approved, UL Listed | 74 gpm @ 175 psi | 00000000 | 00000 | |
| 286° | Blue | 175 | Brass | FM Approved, UL Listed | 74 gpm @ 175 psi | 00000000 | 00000 | |
| 360° | Purple | 175 | Brass | FM Approved, UL Listed | 74 gpm @ 175 psi | 00000000 | 00000 | |
Fusible Link | ||||||||
| 165° | __ | 175 | Brass | FM Approved, UL Listed | 74 gpm @ 175 psi | 0000000 | 00000 | |
| 212° | White | 175 | Brass | FM Approved, UL Listed | 74 gpm @ 175 psi | 0000000 | 00000 | |
| 280° | Blue | 175 | Brass | FM Approved, UL Listed | 74 gpm @ 175 psi | 0000000 | 00000 | |
3/4 NPT Male Connection | ||||||||
Glass Bulb | ||||||||
| 155° | Red | 175 | Brass | FM Approved, UL Listed | 105 gpm @ 175 psi | 00000000 | 00000 | |
| 175° | Yellow | 175 | Brass | FM Approved, UL Listed | 105 gpm @ 175 psi | 00000000 | 00000 | |
| 200° | Green | 175 | Brass | FM Approved, UL Listed | 105 gpm @ 175 psi | 00000000 | 00000 | |
| 286° | Blue | 175 | Brass | FM Approved, UL Listed | 105 gpm @ 175 psi | 00000000 | 00000 | |
| 360° | Purple | 175 | Brass | FM Approved, UL Listed | 105 gpm @ 175 psi | 00000000 | 00000 | |
Fusible Link | ||||||||
| 165° | __ | 175 | Brass | FM Approved, UL Listed | Upright | 105 gpm @ 175 psi | 00000000 | 000000 |
| 212° | White | 175 | Brass | FM Approved, UL Listed | Upright | 105 gpm @ 175 psi | 00000000 | 000000 |
| 280° | Blue | 175 | Brass | FM Approved, UL Listed | Upright | 105 gpm @ 175 psi | 00000000 | 000000 |
Quick-Response Fire Sprinkler Heads
These sprinkler heads react to heat up to five times faster than other sprinkler heads. They are triggered when the liquid-filled bulb bursts at the rated temperature. Heads must be installed and maintained according to National Fire Protection Association (NFPA) standards. Install using sprinkler-head wrenches (sold separately) or any hand wrench that fits the NPT size.
Pendent-style sprinkler heads are designed to be suspended below support piping. They can be used with exposed piping or finished ceilings.
Upright-style sprinkler heads are designed to be installed above support piping and can only be used with exposed piping.
Temperature | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Rating, ° F | Color Code | Max. Pressure, psi | Material | Specifications Met | Choose a Style | Gender | Flow Rate | Each | |
1/2 NPT Male Connection | |||||||||
| 155° | Red | 175 | Brass | FM Approved, UL Listed | Male | 74 gpm @ 175 psi | 0000000 | 000000 | |
| 175° | Yellow | 175 | Brass | FM Approved, UL Listed | Male | 74 gpm @ 175 psi | 0000000 | 00000 | |
| 200° | Green | 175 | Brass | FM Approved, UL Listed | Male | 74 gpm @ 175 psi | 0000000 | 00000 | |
| 286° | Blue | 175 | Brass | FM Approved, UL Listed | Male | 74 gpm @ 175 psi | 0000000 | 00000 | |
3/4 NPT Male Connection | |||||||||
| 155° | Red | 175 | Brass | FM Approved, UL Listed | Male | 105 gpm @ 175 psi | 0000000 | 000000 | |
| 175° | Yellow | 175 | Brass | FM Approved, UL Listed | Male | 105 gpm @ 175 psi | 0000000 | 000000 | |
| 200° | Green | 175 | Brass | FM Approved, UL Listed | Male | 105 gpm @ 175 psi | 0000000 | 000000 | |
| 286° | Blue | 175 | Brass | FM Approved, UL Listed | Male | 105 gpm @ 175 psi | 0000000 | 000000 | |
| Wrench for Sprinkler Heads | 0000000 | Each | 0000000 |
Recessed Fire Sprinkler Heads
Use these sprinkler heads for low-profile fire safety. Install using required wrenches (sold separately).
Glass-bulb sprinkler heads are triggered when the liquid-filled bulb bursts at the rated temperature.
Fusible-link sprinkler heads are triggered by a soft metal alloy that melts at the rated temperature.
1/2 NPT Male Connection | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Temperature | Cover Plates | Required Wrenches | |||||||||||
| Rating, °F | Color Code | Flow Rate | Max. Pressure, psi | Recess Dia. | Recess Dp. | Material | Specifications Met | Each | Each | Each | |||
Glass Bulb | |||||||||||||
| 155° | Red | 74 gpm @ 175 psi | 175 | 1 15/16" | 1" | Chrome-Plated Bronze | FM Approved, UL Listed | 00000000 | 000000 | 00000000 | 000000 | 00000000 | 0000000 |
| 175° | Yellow | 74 gpm @ 175 psi | 175 | 1 15/16" | 1" | Chrome-Plated Bronze | FM Approved, UL Listed | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
| 200° | Green | 74 gpm @ 175 psi | 175 | 1 15/16" | 1" | Chrome-Plated Bronze | FM Approved, UL Listed | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 000000 |
Fusible Link | |||||||||||||
| 165° | __ | 74 gpm @ 175 psi | 175 | 1 15/16" | 1" | Chrome-Plated Bronze | FM Approved, UL Listed | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 |
| 212° | White | 74 gpm @ 175 psi | 175 | 1 15/16" | 1" | Chrome-Plated Bronze | FM Approved, UL Listed | 00000000 | 000000 | 00000000 | 00000 | 00000000 | 000000 |
Concealed Fire Sprinkler Heads
An inconspicuous cover plate provides a clean look for sprinkler heads. When the plate's temperature rating is reached, it falls away to expose the sprinkler head. The head itself has a liquid-filled glass bulb that bursts at the rated temperature to trigger the sprinkler. Install using required wrenches (sold separately).
1/2 NPT Male Connection | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Temperature | Cover Plates | Required Wrenches | ||||||||||
| Plate Temperature Rating, ° F | Plate Color | Rating, °F | Color Code | Flow Rate | Specifications Met | Sprinkler Head Style | Each | Each | Each | |||
| 139° | Chrome | 155° | Red | 74 gpm @ 175 psi | FM Approved, UL Listed | Pendent | 00000000 | 0000000 | 00000000 | 000000 | 0000000 | 0000000 |
| 139° | White | 155° | Red | 74 gpm @ 175 psi | FM Approved, UL Listed | Pendent | 00000000 | 000000 | 00000000 | 00000 | 0000000 | 000000 |
| 165° | Chrome | 200° | Green | 74 gpm @ 175 psi | FM Approved, UL Listed | Pendent | 00000000 | 000000 | 00000000 | 00000 | 0000000 | 000000 |
| 165° | White | 200° | Green | 74 gpm @ 175 psi | FM Approved, UL Listed | Pendent | 00000000 | 000000 | 00000000 | 00000 | 0000000 | 000000 |
Paintable Fire-Stop Caulk
Seal small openings in fire-resistant walls and floors. Dispense cartridges using a caulk gun.
Expanding caulk expands when heated to fill voids left by melted pipes.
| Container Size | Application Temperature, ° F | Color | Fire Rating, hrs. | Specifications Met | Each | |
Caulk | ||||||
|---|---|---|---|---|---|---|
| 10.3 fl. oz. Cartridge | 40° to 120° | Red | 4 | UL 1479, UL 2079 | 0000000 | 000000 |
| 30 fl. oz. Cartridge | 40° to 120° | Red | 4 | UL 1479, UL 2079 | 0000000 | 00000 |
Expanding Caulk | ||||||
| 10.3 fl. oz. Cartridge | 40° to 120° | Red | 4 | UL 1479, UL 2079 | 00000000 | 00000 |
| 30 fl. oz. Cartridge | 40° to 120° | Red | 4 | UL 1479, UL 2079 | 00000000 | 00000 |
| 5 gal. Pail | 40° to 120° | Red | 4 | UL 1479, UL 2079 | 00000000 | 000000 |
Watertight Fire-Stop Caulk
This caulk forms a long-lasting, flexible, watertight seal. Use it to close small openings in fire-resistant walls and floors. Dispense cartridges using a caulk gun.
Fire-Stop Putty
Hand-mold this putty to fill small openings in fire-resistant walls and floors. It expands when heated and forms an insulating char that fills gaps left by melted pipes.
The pad is commonly used to seal openings around electrical boxes.
Fire-Stop Cement
Good for sealing large openings in fire-resistant walls and floors. Mix this lightweight powder with water to create a thick paste that's easy to apply.
| Weight, lbs. | Color | Application Temperature, °F | Fire Rating, hrs. | Specifications Met | Each | |
| 45 | Light Red | 40° to 275° | 4 | UL 1479 | 00000000 | 0000000 |
Fire-Stop Pipe Collars
Slide these into the small gaps around pipes passing through fire-resistant walls and floors. Collars have a sealant that expands when heated to fill gaps left by melted pipes.
Fire-Stop Sheets
Cut these sheets to size to seal large openings in fire-resistant walls and floors while allowing built-up heat to escape. They expand when heated and form an insulating char that fills gaps left by melted cable. To install, drill holes and fasten with screws (not included).
Fire-Stop Plugs
Squeeze plugs into small openings in fire-resistant walls and floors. They are reconfigurable, making them useful for applications where cable configurations change frequently. Plugs expand when heated to fill gaps left by melted cable.
Fire-Stop Bags
Stack these bags to fill large gaps in fire-resistant walls and floors. They are reconfigurable, making them useful for applications where cable configurations change frequently. Bags expand when heated to fill gaps left by melted cables.
| Thick. | Lg. | Wd. | Color | Fire Rating, hrs. | Specifications Met | Each | |
| 2" | 9" | 6" | Red | 4 | UL 1479, FM Approved | 00000000 | 000000 |
Fire Hydrants
Fight fires in areas around your facility that city-installed hydrants don’t reach. These hydrants are dry-barrel, the most common type of hydrant, which means they drain water when not in use. Not only does this prevent freezing, but it keeps water from spurting out if a vehicle hits these hydrants. And if they get hit, they won’t need much repair—their safety flange and safety stem coupling break without shattering. That means the hydrant comes off cleanly, minimizing damage to the main body and stem. To repair, just replace the flange and coupling using the repair kit (sold separately).
These hydrants must be installed and maintained according to National Fire Protection Association (NFPA) Standards. If your main line is below 5 ft., attach a stem extension (sold separately). An extension can also raise your hydrant above the ground.
These hydrants are FM approved and meet AWWA C-502 standards for the durability, reliability, and safety of dry-barrel fire hydrants. Connect them to the plain end of a water main line with their mechanical joint connection. The fitting will maintain a tight seal through normal underground movement and temperature changes.
For technical drawings and 3-D models, click on a part number.
| Inlet Pipe Size | Fire Hose Trade Size (No. of Outlets) | Bury Dp., ft. | Ht. Above Ground | Drive Size | Drive Style | Valve Opening Direction | Body Material | Color | Fire Hydrant Valve Size | Operating Pressure, psi | Max. Temp., °F | Specifications Met | Each | |
Mechanical Joint Pipe Inlet × NH/NST Female Hose Outlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6 | 2 1/2 (2) 4 1/2 (1) | 5 | 32" | 1 1/2" | External Pentagon | Counterclockwise | Epoxy-Coated Ductile Iron | Red | 5 1/4" | 200 | 130° | AWWA C502, FM Approved | 0000000 | 000000000 |
| Includes | Each | |
| Safety Stem Coupling, Safety Flange, Gasket, Mounting Hardware | 0000000 | 0000000 |