Rubber Fixture Tables | McMaster-Carr

Filter by

System of Measurement

Overall Length

Hole Thread Size

Thread Size

Hole Center-to-Center

Width

Overall Width

Material

Shape

Mobility

Component

Overall Height

Length

Height

Plate Material

Wheel Diameter

Overall Weight Capacity

880 lb.

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

REACH

Not Compliant

RoHS

Not Compliant

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Top Weight Capacity

880 lb.

1,500 lb.

Wheel Configuration

Two Rigid Casters and Two Swivel Casters

Plate Thickness

Application

9 Products

Fixture Tables for Parts Inspection

Create a fixture setup on these tables to inspect your parts. A built-in threaded fixture plate gives you endless possibilities to attach CMM fixturing clamps and other accessories right where you need them. Labeled around the edge with letters and numbers—just like a battleship game board—it’s easy to identify holes and repeat tasks. To adjust their height slightly and move these tables around your workspace, they come with leveling casters. Tables come assembled.

Tables

Overall					Holes
Lg.	Wd.	Ht.	Wt. Cap., lb.	Plate Thk.	No. of	Ctr.-to-Ctr.	Flatness Tolerance	Frame Material	Plate Material	Wheel Configuration	Features		Each







			1/4"-20 Hole Thread Size

			47 1/4"	35 3/8"	35 3/8"	880	3/4"	1,564	1"	0.005"	Aluminum	Aluminum	Four Swivel Casters	Leveling Casters, Numbered and Lettered Holes	6365N11	000000000




					M6 Hole Thread Size

					1,200 mm	900 mm	900 mm	880	19 mm	1,645	25 mm	0.127 mm	Aluminum	Aluminum	Four Swivel Casters	Leveling Casters, Numbered and Lettered Holes	6365N12	00000000

Fixture Plate Plugs

Fill unused holes on fixture plates and columns to keep chips and shavings from clogging or damaging them. These plugs are easy to install and remove, so you can switch them to a different hole when you need to change setups.

Screw-In Plugs for Threaded Holes


	Aluminum

Install screw-in plugs into threaded holes with a screwdriver. They have a slotted drive that resists chip buildup.

Aluminum—Aluminum plugs are more corrosion resistant than steel plugs—they’re also gentler on steel threads.

	Ht.	Drive Style	O-Ring Material		Each
Aluminum



	1/2"-13	7/8"	Slotted	Buna-N	3161N12	00000


	5/8"-11	1 1/8"	Slotted	Buna-N	3161N14	0000

Push-In Plugs for Unthreaded Holes

Push-in plugs slide into unthreaded holes with finger pressure. They’re hollow, but they come with a spring-loaded cap to keep debris from collecting inside the plug. Remove these plugs by twisting a dowel pin removal tool into their internal threads. Made from brass, they’re nonmarring, so they won’t damage the surface of fixture bushings.

	Dia.	Ht.	O-Ring Material		Each
Brass



	1/4"-20	1/2"	7/8"	Fluoroelastomer	3161N18	00000

Adjustable-Height Fixture Tables for Welding

Raise or lower these tables to the perfect height. Similar to a scissor lift, control them with a simple foot pedal. Tables are hydraulically powered and lock in position with a safety pin. The heavy duty casters let you roll tables where needed. They also lock so tables don’t move during use. Add components such as clamps, brackets, stops, rests, mounting plates, fixturing squares, risers, and V-blocks to build fixtures.

Tables

Nitride-Coated Steel Plate—Both sides of these plates are surface ground for flatness and nitrided to resist rust, scratches, and weld spatter. They have long lifespans and require minimal maintenance.

Overall						Plates			Holes
Lg.	Wd.	Ht.	Dynamic Load Cap., lb.	Static Load Cap., lb.	Elevation per Stroke	No. of	Wd.	Thk.	No. per Plate	Dia.	Ctr.-to-Ctr.	Flatness Tolerance	Material	Plate Material	Wheel Configuration	Features		Each
48"	30"	25" to 40"	400	600	1"	1	30"	5/8"	360	5/8"	2"	0.012"/3 ft.	Steel	Nitride-Coated Steel	Two Rigid Casters and Two Swivel Casters	Locking Pin	8305N1	000000000

Fixture Tables for Welding

Use these tables as a foundation for welding setups. They have 5/8" unthreaded holes with 2" center-to-center spacing, so they’re compatible with clamps, stops, V-blocks, and other components. To protect tables and other components from heat and spatter, coat them in welding antispatter.

Tables

Cart

Cart—A versatile addition to any workspace, these heavy duty steel tables combine mobility, stability, and storage. Roll them anywhere in your shop on the swivel casters, then lock into place with the heel brake. Lower the leveling feet to lift the casters off the ground for a stable, level surface, even on slightly sloped and pitted floors. Integrated shelves, racks, and a pegboard panel organize tools and keep them within reach. Clean up slag while you work by scraping it into the built-in retractable trays.

	Overall				Plates			Holes
	Lg.	Wd.	Ht.	Load Cap., lb.	No. of	Wd.	Thk.	No. per Plate	Dia.	Ctr.-to-Ctr.	Flatness Tolerance	Material	Plate Material	Features		Each
Cart



		48"	30"	36"	1,500	1	30"	5/8"	360	5/8"	2"	0.018"/3 ft.	Steel	Nitride-Coated Steel	Leveling Feet, Pegboard Panel, Racks, Slag Trays	1403N25	000000000


		48"	48"	36"	1,500	1	48"	5/8"	576	5/8"	2"	0.018"/3 ft.	Steel	Nitride-Coated Steel	Leveling Feet, Pegboard Panel, Racks, Slag Trays	1403N26	00000000
		60"	30"	36"	1,500	1	30"	5/8"	450	5/8"	2"	0.018"/3 ft.	Steel	Nitride-Coated Steel	Leveling Feet, Pegboard Panel, Racks, Slag Trays	1403N27	00000000