McMaster-Carr logo
    Filter by
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Level Orientation
    For Flange Class
    Industrial Info Compare
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    89 Products

    No-Strike Hex-Head Alignment Pins for Flange Bolt Holes

    Image of Product. Front orientation. Contains Annotated. Alignment Pins. No-Strike Hex-Head Alignment Pins for Flange Bolt Holes.
    The tapered shaft of these pins eliminates the need for hammering and prying when aligning flange bolt holes. To align bolt holes, fit the tapered end of the pin into the bolt holes and use a wrench on the hex head to rotate and align the holes. If your bolt hole is in between the sizes listed, choose the smaller size pin.
    Body
    For Bolt
    Hole Dia.
    Point
    Dia.
    Taper
    Lg.
    Overall
    Lg.
    Shape
    Texture
    Each
    Black-Oxide Steel
    3/8"1/4"1 3/8"2 1/2"RoundSmooth6851A41000000
    1/2"3/8"1 1/2"2 7/8"RoundSmooth6851A4200000
    1/2"3/8"1 1/2"5 7/8"RoundSmooth6851A5400000
    5/8"1/2"1 3/4"3 3/8"RoundSmooth6851A4300000
    5/8"1/2"1 3/4"6 3/8"RoundSmooth6851A5500000
    3/4"5/8"1 7/8"4"RoundSmooth6851A2200000
    3/4"5/8"1 7/8"7"RoundSmooth6851A5600000
    7/8"5/8"1 15/16"4 1/4"RoundSmooth6851A2300000
    7/8"11/16"2"7 1/4"RoundSmooth6851A5700000
    1"3/4"2 1/4"4 3/4"RoundSmooth6851A2400000
    1"3/4"2 1/4"7 3/4"RoundSmooth6851A58000000
    1 1/8"7/8"2 3/4"6"RoundSmooth6851A25000000
    1 1/8"7/8"2 3/4"9"RoundSmooth6851A59000000
    1 1/4"1"3"6 1/2"RoundSmooth6851A26000000
    1 1/4"1"3"9 1/2"RoundSmooth6851A6000000
    1 3/8"1 3/16"3 3/8"7 1/2"RoundSmooth6851A27000000
    1 3/8"1 3/16"3 3/8"10 1/2"RoundSmooth6851A61000000
    1 1/2"1 1/4"3 1/2"7 3/4"RoundSmooth6851A28000000
    1 1/2"1 1/4"3 1/2"10 3/4"RoundSmooth6851A62000000
    1 5/8"1 3/8"3 7/8"8 3/4"RoundSmooth6851A44000000
    1 5/8"1 3/8"3 7/8"11 3/4"RoundSmooth6851A63000000
     

    Pipe Flange Aligner Pins

    Image of Product. Front orientation. Pipe Flange Aligners. Pipe Flange Aligner Pins.
    Insert a pair of these nut-and-bolt pins into adjacent flange holes and tighten to align flanges before connecting two pipes. One pin in each pair has a level for vertical alignment. Use a separate level to align the flange horizontally. Also known as two-hole pins.
    4 1/2" Lg. Extension—Pins with a 4 ½” length extension let you increase the length of your pins to align thicker flanges.
    Two Couplings—Use the included couplings to connect the extension to your pins.
    For
    Flange
    Hole Dia.
    Thk.
    Aligner Connection
    Method
    Includes
    Pair
    Steel
    5/16" to 15/16"1"Screw Together—2298A21000000
    1/2" to 1 7/16"2 1/2"Screw Together—2298A1400000
    1/2" to 1 15/16"4"Screw Together—2298A15000000
    5/8" to 3"9"Screw Together4 1/2" Lg. Extension, Two Couplings2298A22000000
     
    Replacements for Pipe Flange Aligners
    Replacement Pipe Flange Aligner Couplings
    Image of Product. Bottom orientation. Pipe Flange Aligner Couplings.
    For Flange
    Hole Dia.
    Material
    Lg.
    Each
    5/8" to 3"Steel1"2298A2500000
    Replacement Pipe Flange Aligner Extensions
    Image of Product. Bottom orientation. Pipe Flange Aligner Extensions. Pipe Flange Aligner Pins.
    For Flange
    Hole Dia.
    Material
    Lg.
    Each
    5/8" to 3"Steel2 7/8"2298A2300000
    5/8" to 3"Steel4 1/2"2298A240000

    Pipe Flange Aligners with Protractor

    Image of ProductInUse. Front orientation. Pipe Flange Aligners. Pipe Flange Aligners with Protractor.
    Line up two pipe flanges and determine pipe angle with the included nut-and-bolt pins, level, and protractor. Flange holes align as you tighten the pins.
    For Flange
    Hole Dia.
    Angle Measured
    Range
    Graduations (Angle
    Increments)
    For Distance
    Between Bolt Holes
    Each
    Aluminum
    3/16" to 1 3/4"0° to 90°2.5° (2°)2" to 5 1/2"2342A110000000
     

    Pipe Joiners for Gasketed Pipe

    Image of ProductInUse. Front orientation. Contains MultipleImages. Pipe Joiners. Pipe Joiners for Gasketed Pipe.
    Image of Product. Front orientation. Pipe Joiners. Pipe Joiners for Gasketed Pipe.
    Connect heavy and difficult-to-position gasketed pipe by yourself—no need for powered equipment. Chains align the pipe, and the lever forces one pipe into the socket end of another.
    For Pipe
    Size
    OD
    Material
    Chain Cap.,
    lb.
    Handle
    Lg.
    Body Material
    Handle Material
    Chain Material
    Includes
    Each
    3 1/2 to 144.016" to 13.976"Concrete, Iron, PVC, Vitrified Clay1,60027" to 54"Powder-Coated IronZinc-Plated SteelZinc-Plated SteelOne Adjustable Handle
    Two 12-ft. Lg. Chains
    Two Grab Hooks    		4051N110000000

    Pipe Flange Aligner Pins with Horizontal Level

    Image of Product. Front orientation. Pipe Flange Aligners. Pipe Flange Aligner Pins with Horizontal Level.
    Ensure horizontal alignment of pipe flanges with a level rod that runs between two alignment pins. One pin in each pair has a level for vertical alignment. Insert these nut-and-bolt pins into adjacent flange holes and tighten to align flanges before connecting two pipes.
    For Flange
    Hole Dia.
    Aligner Connection
    Method
    Rod
    Lg.
    Each
    Steel
    1/2" to 1 7/16"Screw Together10"2745A2410000000
    1/2" to 1 15/16"Screw Together18"2745A242000000
     

    Wrench-Driven Flange Spreaders

    Image of ProductInUse. Front orientation. Flange Spreaders. Wrench-Driven Flange Spreaders.
    Image of Product. Side1 orientation. Flange Spreaders. Wrench-Driven Flange Spreaders.
    Insert the support rod into a flange bolt hole and turn the hex bolt to drive the spreader. These spreaders must be used in pairs for even distribution of pressure.
    Flange Spreaders
    Replacement
    Flange Spreaders
    For Flange Class
    (Pipe Size)
    Wrench
    Size Req.
    Material
    Color
    Pair
    Each
    150 (2 to 6)
    300 (3/4 to 2 1/2)    		1 1/2"Painted SteelOrange59135A32000000059135A220000000
    150 (5 to 16)
    300 (2 1/2 to 6)    		1 1/2"Painted SteelOrange59135A3400000059135A24000000
    150 (14 to 42)
    300 (10 to 22)    		1 5/8"Painted SteelOrange59135A3600000059135A26000000
    150 (22 to 42)
    300 (16 to 36)    		1 5/8"Painted SteelOrange59135A380000000059135A28000000

    Magnetic Pipe Flange Aligners with Level

    Image of ProductInUse. Front orientation. Pipe Flange Aligners. Magnetic Pipe Flange Aligners with Level.
    Image of Product. Front orientation. Pipe Flange Aligners. Magnetic Pipe Flange Aligners with Level.
    Ensure an even seal around your flange—these tools align and level flanges in a single step. The strong magnets make sure your bolt holes are perfectly inline horizontally and that your flange isn’t tilted. If your flange is made of stainless steel or another nonmagnetic material, secure these aligners using the included threaded cones.
    For Flange
    Hole Dia.
    For Max. Flange Hole
    Ctr.-to-Ctr. Distance
    Level
    Lg.
    Aligner Connection
    Method
    Includes
    Cone
    Material
    Magnet
    Material
    Container
    Type
    Each
    Aluminum Body
    1/2" to 2"9 1/2"10 1/2"MagneticThreaded ConesSteelNeodymiumCarrying Case7049N110000000
     

    T-Handle Flange Spreaders

    Image of ProductInUse. Front orientation. Flange Spreaders. T-Handle Flange Spreaders.
    Image of Product. Front orientation. Flange Spreaders. T-Handle Flange Spreaders.
    Place the hooks in flange bolt holes and turn the T-handle. These spreaders must be used in pairs for even distribution of pressure.
    For Flange Class
    (Pipe Size)
    Material
    Pair
    125 (16 to 48)
    150 (18 to 24)
    250 (12 to 30)
    300 (12 to 24)    		Black-Oxide Steel59125A20000000

    No-Strike Hex-Head Alignment Pin Sets for Flange Bolt Holes

    Image of Product. Front orientation. Alignment Pins. No-Strike Hex-Head Alignment Pin Sets for Flange Bolt Holes.
    The tapered shaft of these pins eliminates the need for hammering and prying when aligning flange bolt holes. To align bolt holes, fit the tapered end of the pin into the bolt holes and use a wrench on the hex head to rotate and align the holes. If your bolt hole is in between the sizes listed, choose the smaller size pin.
    Body
    No. of
    Pieces
    Includes
    Shape
    Texture
    Container Type
    Each
    Black-Oxide Steel
    6Two 5/8" Point Dia. Pins for 3/4" Bolt Hole Dia.
    Two 5/8" Point Dia. Pins for 7/8" Bolt Hole Dia.
    Two 3/4" Point Dia. Pins for 1" Bolt Hole Dia.    		RoundSmoothPlastic Carrying Case6851A390000000
     

    Curved Wedges

    Image of Product. Front orientation. Wedges. Curved Wedges, Steel.
    Image of Product. Front orientation. Wedges. Curved Wedges, Steel with Tether Hole.

    Steel

    Steel with Tether Hole

    These tools are often used for lifting and aligning machinery or to separate pipe flanges. They’re also known as banana wedges.
    Tether Hole—When used with a tether (not included), wedges with a tether hole help keep tools close and prevent them from accidentally falling.
    Lg.
    Wd.
    Thk.
    Wt.,
    lb.
    Tether
    Hole Dia.
    Each
    Steel
    12"7/8"3/32" to 7/8"1 1/2—5952A1000000
     
    Steel with Tether Hole
    12"7/8"3/32" to 7/8"1 1/21/4"5952A200000
     

    Pipe Flange Alignment Kits

    Image of ProductInUse. Side1 orientation. Pipe Flange Aligners. Pipe Flange Alignment Kits, Hand-Crank Alignment.

    Hand-Crank Alignment

    Image of ProductInUse. Side1 orientation. Pipe Flange Aligners. Pipe Flange Alignment Kits, Ratchet Alignment.

    Ratchet Alignment

    Image of ProductInUse. Side1 orientation. Pipe Flange Aligners. Pipe Flange Alignment Kits, Hydraulic Alignment.

    Hydraulic Alignment

    Align flanges on heavy pipes when alignment pins don't fit through the flange holes. Often used for pipefitting, welding, and maintenance, these kits make it possible to correct angular and offset misalignment on a range of pipe sizes.
    Choose an alignment mechanism based on how much force you need to move the pipe. If you're not sure, measure the flange hole diameter—it correlates to the pressure class and size of your pipe. Larger pipes typically require more force.
    Hand-Crank Alignment—Hand-crank aligners are best for routine maintenance and quick repairs. As you turn the hand crank, it moves the pipe.
    Ratchet Alignment—Ratchet aligners produce four times as much force as hand crank aligners. Position the tool's arm through a flange hole on the pipe you plan to move, and place the lead screw on the edge of the stationary pipe's flange. Wrap the strap around the pipe you plan to move. As you rotate the lead screw with a wrench, the misaligned pipe moves into position.
    Hydraulic Alignment—Hydraulic aligners are best for severe misalignment—they generate over twice as much force as ratcheting aligners. Position the tool's arm through the flange hole on the pipe you plan to move, and place the lead screw on the edge of the stationary pipe's flange. Wrap the strap around the pipe you plan to move. As you press down on the hand pump connected to the lead screw, the pipe moves.
    Alignment
    Mechanism
    Wt. Cap.,
    lb.
    For Min.
    Flange Hole Dia.
    Includes
    Container Type
    Each
    Hand Crank2,4005/8"Strap—7068N11000000000
    Ratchet9,9001"Socket, Strap, WrenchPlastic Carrying Case7068N1200000000
    Hydraulic22,2001 3/8"Hand Pump with Gauge, Hydraulic Cylinder, Hydraulic Hose, StrapPlastic Carrying Case7068N1300000000

    Stepped Pipe Flange Aligner Pins

    Image of ProductInUse. Front orientation. Pipe Flange Aligners. Stepped Pipe Flange Aligner Pins.
    Image of Product. Front orientation. Pipe Flange Aligners. Stepped Pipe Flange Aligner Pins.
    Each step on these aligner pins matches common bolt holes on pipe flanges, so they're more precise than conical aligner pins and don’t require nuts. Press the pair of pins into mated flanges to make sure the flanges are aligned. Once two sets of holes are aligned, you'll know the rest of the holes are as well. Made of durable chrome-plated steel, they'll hold their shape over time and resist rust.
    For Flange
    Hole Dia.
    Lg.
    Pair
    Chrome-Plated Steel
    3/8" to 3/4"3 5/8"7356N13000000
    3/4" to 1 1/4"5 1/2"7356N1200000
    3/4" to 1 3/8"8"7356N1100000
     

    Impact-Resistant Alignment Pins

    Image of Product. Front orientation. Contains Annotated. Alignment Pins. Impact-Resistant Alignment Pins.
    Image of Product. Front orientation. Contains Annotated. Alignment Pins. Impact-Resistant Alignment Pins, Alignment Pins with Tether Hole.

    Alignment Pins with Tether Hole

    Often called bull pins, these pins are designed to resist mushrooming caused by repeated pounding. The large striking surface allows you to drive the pins quickly and efficiently. Use alignment pins to align structural components such as I-beams and angle irons for bolting, riveting, and welding.
    Alignment Pins with Tether Hole—For added safety, choose pins with a tether hole while working from heights.
    Body
    Point
    Dia.
    Taper
    Lg.
    Dia.
    Overall
    Lg.
    Shape
    Texture
    Each
    Steel
     
    Alignment Pins
    1/4"5 1/2"1 1/16"10"RoundSmooth6057A11000000
    5/16"6"1 1/4"13"RoundSmooth6057A1200000
     
    Alignment Pins with Tether Hole
    1/4"5 1/2"1 1/16"10"RoundSmooth6057A1300000
    5/16"6 5/16"1 1/4"13 3/4"RoundSmooth6057A1400000
     

    Wedges

    Image of Product. Front orientation. Wedges. Wedges.
    Make quick height adjustments. Use wedges in pairs for parallel adjustment. Also known as fox and flange wedges.
    Lg.
    Wd.
    Thk.
    Wt.
    Each
    Steel
    3"1"1/8" to 1/4"3 oz.5081A100000
    5"1"3/32" to 1/2"6 oz.5081A20000
    6"1 1/4"1/8" to 3/4"11 oz.5081A30000
    8"1 5/8"1/8" to 1"1 5/8 lb.5081A400000
    11"7/8"3/32" to 7/8"1 1/2 lb.5775A100000
    12"2 1/2"3/32" to 1 1/2"5 1/4 lb.5081A500000
     

    Forked Wedges

    Image of Product. Front orientation. Wedges. Forked Wedges, Steel.

    Steel

    Image of Product. Front orientation. Wedges. Forked Wedges, Steel with Internal Sliding Ram Bar.

    Steel with Internal

    Sliding Ram Bar

    Like the claw end of a hammer around a nail, these wedges grip studs or rods from both sides to give you leverage for prying apart two joined components. They’re often used to separate ball joints and tie rod ends in suspension and steering systems. Also known as pickle forks.
    11" Long, 12" Long, and 16" Long—For 11”, 12”, and 16” long wedges, strike the wide, flat base with a hammer until the forked end pries apart the joint.
    36 1/2" Long—The 36 1/2” long wedges have an internal sliding ram bar that eliminates the need for a hammer, making them safer for your hands. The ram bar also hits more forcefully and directly than a hammer. With interchangeable forks, these wedges allow you to choose the appropriate forks to use for the task at hand.
    Wedges
    1 5/8" Wide
    Replacement Forks
    2" Wide
    Replacement Forks
    Lg.
    Wd.
    Thk.
    Opening
    Wd.
    Wt.,
    lb.
    Each
    Each
    Each
    Steel
    11"1 3/4"1/32" to 7/8"1 1/8"1 3/45661N12000000———0———0
    11"2"1/32" to 7/8"1 3/8"1 7/85661N1100000———0———0
    12"1 5/8"1/32" to 7/8"3/4"1 1/45661N1800000———0———0
    12"2"1/32" to 7/8"1"1 1/45661N1900000———0———0
    16"1 3/8"1/32" to 7/8"5/8"1 3/45661N1300000———0———0
    16"1 5/8"1/32" to 7/8"7/8"2 7/85661N1400000———0———0
     
    Steel with Internal Sliding Ram Bar
    36 1/2"1 5/8", 2"1/32" to 7/8"5/8", 7/8"115661N150000005661N160000005661N17000000
     

    Nonsparking Wedges

    Image of Product. Front orientation. Wedges. Nonsparking Wedges, Aluminum Bronze.

    Aluminum Bronze

    Image of Product. Front orientation. Wedges. Nonsparking Wedges, Beryllium Copper.

    Beryllium Copper

    These wedges are made of nonsparking materials. They're good for making quick height adjustments. Use in pairs for parallel adjustment. Also known as fox and flange wedges.
    Warning: Do not use these tools in direct contact with acetylene.
    Aluminum Bronze—Aluminum bronze wedges are Factory Mutual approved, nonmagnetic, and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
    Lg.
    Wd.
    Thk.
    Wt.
    Certification
    Each
    Aluminum Bronze
    3"1/2"7/64" to 1/4"1 oz.FM Approved
    		6517A1000000
    3 1/2"2"7/64" to 3/8"7 oz.FM Approved
    		6517A1100000
    4"3/4"7/64" to 1/2"3 oz.FM Approved
    		6517A1200000
    6"1"7/64" to 1/2"7 oz.FM Approved
    		6517A1300000
    6"1 1/2"7/64" to 3/4"15 oz.FM Approved
    		6517A1400000
    7"1 1/4"7/64" to 1/2"11 oz.FM Approved
    		6517A1500000
    7"2"7/64" to 3/8"12 oz.FM Approved
    		6517A2200000
    7"2"7/64" to 3/4"1 5/8 lb.FM Approved
    		6517A1600000
    8"1 1/2"7/64" to 1"1 3/4 lb.FM Approved
    		6517A1800000
    8"1 1/2"7/64" to 1 5/8"2 1/2 lb.FM Approved
    		6517A1700000
    8"2"7/64" to 3/4"1 3/4 lb.FM Approved
    		6517A1900000
    8 1/2"2"7/64" to 1 1/4"3 lb.FM Approved
    		6517A2100000
     
    Beryllium Copper
    11"7/8"3/32" to 7/8"1 1/4 lb.—58725A67000000
     

    Nonsparking Curved Wedges

    Image of Product. Front orientation. Wedges. Nonsparking Curved Wedges, Beryllium Copper.

    Beryllium Copper

    Image of Product. Front orientation. Wedges. Nonsparking Curved Wedges, Beryllium Copper with Tether Hole.

    Beryllium Copper with

    Tether Hole

    This wedge is made of nonsparking beryllium copper. Curved wedges are often used for lifting and aligning machinery or to separate pipe flanges. Also known as a banana wedge.
    Warning: Do not use this tool in direct contact with acetylene.
    Tether Hole—When used with a tether (not included), wedges with a tether hole stay close and prevent accidental drops.
    Lg.
    Wd.
    Thk.
    Wt.,
    lb.
    Tether
    Hole Dia.
    Each
    Beryllium Copper
    12"7/8"3/32" to 7/8"1 1/2—58805A670000000
     
    Beryllium Copper with Tether Hole
    12"7/8"3/32" to 7/8"1 1/21/4"58805A66000000
     

    Magnetic Pipe Flange Aligner Pins

    Image of Product. Bottom orientation. Pipe Flange Aligners. Magnetic Pipe Flange Aligner Pins.
    Swiftly and accurately align pipe flange bolt holes without the hassle of threads. These pins have strong magnets that snap together. Insert them into adjacent bolt holes to help make sure flanges are parallel before connecting pipes. Also known as two-hole pins.
    For 2 3/4" Flange Thickness—Pins for 2 3/4" thick flanges can be used with pipe flange aligner extensions (sold separately) to lengthen their reach for flanges up to 3 1/2″ thick.
    Pipe Flange Aligners
    Pipe Flange
    Aligner Extensions
    For
    Flange
    Hole Dia.
    Thk.
    Aligner Connection
    Method
    Magnet
    Material
    Pair
    Lg.
    Each
    Steel
    5/16" to 7/8"7/8"MagneticNeodymium7065N11000000————0
    1/2" to 1 7/16"1 3/8"MagneticNeodymium7065N12000000————0
    3/4" to 1 15/16"2 3/4"MagneticNeodymium7065N130000001 3/4"7065N14000000
     
    back to top