We will reply to your message within an hour.
More
Shaft-mount track rollers have more mounting flexibility than threaded track rollers.
Thread the stud directly into a component or secure with a nut for through-hole mounting.
A dual-flange design provides guidance on both sides and helps these rollers stay on track.
A flange on one side of the wheel keeps your equipment running on square structural tubing and other rails.
A flange on one or both sides of the wheel keeps your equipment running on square structural tubing and other rails.
A flange on one or both sides of the wheel keeps your equipment running on rails and square structural tubing.
Make your own wheels by cutting these wheel blanks to size with a band saw. They're easy to machine so you can create V-groove and flanged wheels, as well as conveyor rollers and pulleys.
Use where high loads and speeds are not required.
Form these bearings into a double flange and they’ll handle thrust loads from either direction. They have pre-cut fins on one end that you can flatten out against a surface to make a second flange.
An aluminum shell adds strength.
Compensating for minor shaft misalignment and not requiring lubrication, these sleeve bearings swivel to self-align and are dry running. They don’t need a housing and you can install and replace them without any tools because they’re slip fit.
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.
Made of acetal with a PTFE filler, these bearings handle velocities up to twice as high as standard acetal bearings. They swivel to compensate for a small amount of shaft misalignment.
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.
Made of thermoplastic, these bearings conduct electricity to prevent static buildup in loads parallel and perpendicular to your shaft.
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
Good for underwater applications, these bearings won’t swell or warp when wet.
Meet strict fire protection requirements with these bearings—they’re rated UL94 V-0 for flame retardance.
These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings.
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.
The oil in these bearings is suitable for incidental contact with food.
These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings.
The materials and dimensions of these bearings meet strict military standards to ensure compatibility with other parts. Also known as Oilite® bearings, they are porous bronze, so startup friction causes them to release a thin layer of oil on the bearing’s surface.
These bronze bearings are strong, wear resistant, and excellent at handling shock loads.
The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Furnished with a traceable lot number and material test report, these bronze bearings are strong, wear resistant, and excellent at handling shock loads.
The tapered rollers in these bearings support large shafts at high static loads.
A bolt in each corner makes for a secure, even hold.
Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with four-bolt flange.
The lubricant in these mounted ball bearings is suitable for incidental contact with food.
These bearings have the highest speed ratings of any mounted ball bearing in our offering.
Use these bearings in corrosive environments and under water.
Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.
With no moving parts, sleeve bearings are better for dirty environments than ball and roller bearings.
With a four-bolt flange for mounting and an IP69K certification approving them for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.
These roller bearings handle extremely high speeds for their small size.
Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.
An elongated mounting hole on one side of the flange lets you adjust the position of these bearings without having to remove your shaft.
The lubricant in these mounted ball bearings is NSF registered H1 and FDA compliant for incidental contact with food.
Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.
Use these bearings for light loads and small shafts. The closed backing blocks out dust and other contaminants.
Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.
Designed with a thin, compact housing, these bearings are good for space-constrained applications.
Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.
Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.
Made of FDA listed PEEK, these bearings are suitable for direct contact with food. The closed backing blocks out dust and other contaminants.
Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.
Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.
Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can.
Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings.
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.
Rated IP69K for washdowns, these bearings stand up to frequent cleanings in food, beverage, pharmaceutical, and chemical plants.
With all three mounting holes on one side, you can position the bearing above or below the mounting surface.
Cut these rollers to the width you need using a band saw