How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
High-Pressure Stainless Steel Unthreaded Pipe Flanges
Use these heavy duty forged flanges for high-pressure applications. Bolt two flat-surface flanges or two raised-surface flanges of same size together with a gasket (sold separately) to create an access point in a pipe line.
304 stainless steel flanges offer very good corrosion resistance. 316 stainless steel flanges have excellent corrosion resistance.
Butt-weld flanges are also known as weld-neck flanges; the flange neck has a beveled end that, when flush to pipe, creates a trough for a strong weld. Slip-on weld flanges have no internal stop; slide a pipe through the flange and weld on both sides. Socket-connect flanges have an internal stop that supports the pipe when welding and prevents the pipe from sliding all the way through.
Stub-end flanges are also known as lap-joint flanges; use them with a stub-end straight adapter (not included). The stub-end straight adapter slides into the flange and welds to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily for frequent cleaning and inspecting. Cap flanges are also known as blind flanges.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met:
Pressure Class 300: ASME B16.5, ASTM A182, MSS SP-25, MSS SP-6
Pressure Class 600: ASME B16.5, ASTM A182 - Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
- Fittings: Use Schedule 40 stainless steel
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size  | Dash Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Each | |
304/304L Stainless Steel | ||||||||||
Pressure Class 300 | ||||||||||
| 1 | 16 | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 600 psi @ 72° F | 300 psi @ 360° F | 00000000 | 000000 |
Pressure Class 600 | ||||||||||
| 1 | 16 | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 1,200 psi @ 72° F | 840 psi @ 400° F | 0000000 | 000000 |
316/316L Stainless Steel | ||||||||||
Pressure Class 300 | ||||||||||
| 1 | 16 | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 600 psi @ 72° F | 300 psi @ 360° F | 00000000 | 00000 |
Pressure Class 600 | ||||||||||
| 1 | 16 | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 1,200 psi @ 72° F | 840 psi @ 400° F | 0000000 | 000000 |
- For Use With:
4 and 6 Pipe Sizes: Air, Hydraulic Fluid, Natural Gas, Oil, Water
All other sizes: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water - Pressure Class: See table
- Specifications Met:
Pressure Class 300: ASME B16.5, ASTM A182, MSS SP-25, MSS SP-6
Pressure Class 600: ASME B16.5, ASTM A182 - Certification:: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
- Fittings: Use Schedule 40 stainless steel
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Dash Size | Max. Pressure | Max. Steam Pressure | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Each | |
304/304L Stainless Steel | ||||||||||
Pressure Class 300 | ||||||||||
| 1 | 16 | 600 psi @ 72° F | 300 psi @ 360° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 00000000 | 000000 |
Pressure Class 600 | ||||||||||
| 1 | 16 | 1,200 psi @ 72° F | 840 psi @ 400° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 0000000 | 000000 |
316/316L Stainless Steel | ||||||||||
Pressure Class 300 | ||||||||||
| 1 | 16 | 600 psi @ 72° F | 300 psi @ 360° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 00000000 | 00000 |
Pressure Class 600 | ||||||||||
| 1 | 16 | 1,200 psi @ 72° F | 840 psi @ 400° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 0000000 | 000000 |
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met:
Pressure Class 300: ASME B16.5, ASTM A182, MSS SP-25, MSS SP-6
Pressure Class 600: ASME B16.5, ASTM A182 - Certification:: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
- Fittings: Use Schedule 40 stainless steel
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Dash Size | Max. Pressure | Max. Steam Pressure | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Each | |
304/304L Stainless Steel | ||||||||||
Pressure Class 300 | ||||||||||
| 1 | 16 | 600 psi @ 72° F | 300 psi @ 360° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 00000000 | 000000 |
Pressure Class 600 | ||||||||||
| 1 | 16 | 1,200 psi @ 72° F | 840 psi @ 400° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 0000000 | 00000 |
316/316L Stainless Steel | ||||||||||
Pressure Class 300 | ||||||||||
| 1 | 16 | 600 psi @ 72° F | 300 psi @ 360° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 00000000 | 00000 |
Pressure Class 600 | ||||||||||
| 1 | 16 | 1,200 psi @ 72° F | 840 psi @ 400° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 0000000 | 000000 |
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met:
Pressure Class 300: ASME B16.5, ASTM A182, MSS SP-25, MSS SP-6
Pressure Class 600: ASME B16.5, ASTM A182 - Certification:: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
- Fittings: Use Schedule 40 stainless steel
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Dash Size | Max. Pressure | Max. Steam Pressure | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Each | |
304/304L Stainless Steel | ||||||||||
Pressure Class 300 | ||||||||||
| 1 | 16 | 600 psi @ 72° F | 300 psi @ 360° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 00000000 | 000000 |
Pressure Class 600 | ||||||||||
| 1 | 16 | 1,200 psi @ 72° F | 840 psi @ 400° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 0000000 | 000000 |
316/316L Stainless Steel | ||||||||||
Pressure Class 300 | ||||||||||
| 1 | 16 | 600 psi @ 72° F | 300 psi @ 360° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 00000000 | 00000 |
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met:
Pressure Class 300: ASME B16.5, ASTM A182, MSS SP-25, MSS SP-6
Pressure Class 600: ASME B16.5, ASTM A182 - Certification:: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 40 stainless steel
- Fittings: Use Schedule 40 stainless steel
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Dash Size | Max. Pressure | Max. Steam Pressure | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Each | |
304/304L Stainless Steel | ||||||||||
Pressure Class 300 | ||||||||||
| 1 | 16 | 600 psi @ 72° F | 300 psi @ 360° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 00000000 | 000000 |
Pressure Class 600 | ||||||||||
| 1 | 16 | 1,200 psi @ 72° F | 840 psi @ 400° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 0000000 | 000000 |
316/316L Stainless Steel | ||||||||||
Pressure Class 300 | ||||||||||
| 1 | 16 | 600 psi @ 72° F | 300 psi @ 360° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 00000000 | 00000 |
Pressure Class 600 | ||||||||||
| 1 | 16 | 1,200 psi @ 72° F | 840 psi @ 400° F | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 0000000 | 000000 |
High-Pressure Stainless Steel Threaded Pipe Flanges
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: ASTM A182, ASME B16.5
- Pipe Nipples and Pipe: Use Schedule 80 stainless steel
Forged for high strength, these heavy duty flanges can handle high-pressure applications. They are also known as ANSI flanges. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line.
304 stainless steel flanges provide very good corrosion resistance. 316 stainless steel flanges have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Dash Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Each | |
304/304L Stainless Steel | ||||||||||
NPT | ||||||||||
Pressure Class 300 | ||||||||||
| 1 | 16 | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 600 psi @ 72° F | 300 psi @ 300° F | 0000000 | 000000 |
Pressure Class 600 | ||||||||||
| 1 | 16 | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 1,200 psi @ 72° F | 840 psi @ 400° F | 0000000 | 000000 |
316/316L Stainless Steel | ||||||||||
NPT | ||||||||||
Pressure Class 300 | ||||||||||
| 1 | 16 | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 600 psi @ 72° F | 300 psi @ 300° F | 0000000 | 00000 |
Pressure Class 600 | ||||||||||
| 1 | 16 | 4 7/8" | 5/8" | 0.75" | 4 | 3 1/2" | 1,200 psi @ 72° F | 840 psi @ 400° F | 0000000 | 000000 |
Low-Pressure Press-Connect Steel Unthreaded Pipe Fittings
- For Use On:
EPDM Rubber O-Ring: Ethylene Glycol, Propylene Glycol, Water
Buna-N Rubber O-Ring: Air, Lubricants, Propane, Fuel Oil, Natural Gas, Diesel Fuel - Specifications Met:
EPDM Rubber O-Ring: ASME B31,1, ASME B31.3, ASME B31.9, FM 1920, UL 213
Buna-N Rubber O-Ring: ASME B31.1, ASME B31.3, ASME B31.9, ANSI LC4/CSA 6.32, International Fuel Gas Code - Maximum Pressure:
EPDM Rubber O-Ring: 200 psi @ 72° F
Buna-N Rubber O-Ring: 125 psi @ 72° F - Pipe Nipples and Pipe: Use Schedule 40 Steel
- Flanges: Use Class 150 Steel
Crimp these fittings onto steel pipe to form a tightly sealed connection that’s faster than threading or welding and doesn’t require heat. An internal gripping ring and rubber O-ring create a secure seal when crimped. They are designed to leak if fittings have not been crimped; a colored dot marks the leak path so it's easy to spot unsealed connections. These steel fittings are coated in zinc-nickel to resist corrosion, but will rust if frequently exposed to saltwater or harsh chemicals. They are comparable to Viega MegaPress steel fittings.
Fittings meet ANSI/ASME B31 code requirements for use in pressure piping systems.
Buna-N rubber O-rings hold up to natural gas, propane, diesel fuel, lubricants, and other oils. Fittings with these O-rings are often used in fuel gas systems and air lines. They meet the ANSI LC4/CSA 6.32 standard for fuel gas systems and comply with the International Fuel Gas Code.
Bolt two same-size flanges together with a gasket (sold separately) to create a removable connection to valves, pumps and other equipment.
For technical drawings and 3-D models, click on a part number.
Bolt Hole | Buna-N Rubber O-Ring | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Socket Dp. | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Pressure Class | Lg. | Each | |
| 1 1/2 | 0.375" | 4 7/8" | 1/2" | 5/8" | 4 | 3 7/8" | 150 | 3 51/64" | 00000000 | 0000000 |
Crimping tools seal fittings in less than five seconds. These tools are cordless, so you can take them to any job. Connect the jaw or ring that matches your pipe size to these tools, then pull the trigger to crimp the fitting. The pivoting head lets you access connections from any angle.
Battery | |||||||
|---|---|---|---|---|---|---|---|
| Voltage | No. Included | Cap., amp-hrs. | Battery Charger Included | Battery Charging Time, min. | Compatible With | Each | |
| 18V DC | 2 | 3 | Yes | 39 | Viega MegaPress Viega ProPress Viega ProPress XL-C | 00000000 | 000000000 |
Jaw and ring sets include three jaws, three rings, and one ring actuator jaw. Jaws are for pipe sizes 1/2 to 1; they fit directly into the crimping tool. Rings are for pipe sizes 1 1/4 to 2; clip the ring around the fitting and use the ring actuator jaw and crimping tool to press the open ends together.
For Pipe | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Material | For Manufacturer | For Manufacturer Model No. | Compatible With | Includes | Container Type | Each | |
| 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 | Stainless Steel, Steel | Ridgid | RP 340 | Viega MegaPress | One Ring Actuator Jaw Three Jaws (1/2-1 Pipe Size) Three Rings (1 1/4-2 Pipe Size) | Carrying Case | 00000000 | 000000000 |
High-Pressure Steel Unthreaded Pipe Flanges
Forged for extra strength, these heavy duty flanges can withstand high-pressure applications. Bolt two flat-surface flanges or two raised-surface flanges of the same size together with a gasket (sold separately) to create an access point in a pipe line.
Butt-weld flanges are also known as weld-neck flanges; the flange neck has a beveled end that, when flush to pipe, creates a trough for a strong weld.
Slip-on weld flanges have no internal stop; slide a pipe through the flange and weld on both sides.
Socket-connect flanges have an internal stop that supports the pipe when welding and prevents the pipe from sliding all the way through.
Stub-end flanges are also known as lap-joint flanges; use them with a stub-end straight adapter (not included). The stub-end straight adapter slides into the flange and welds to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily for frequent cleaning and inspecting.
Cap flanges are also known as blind flanges.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: ASTM A105, ASME B16.5
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 80 steel
- Fittings: Use Class 3000 and Schedule 80 steel
Bolt Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Dash Size | Wall Thick. | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Material | Each | |
Pressure Class 300 | ||||||||||||
| 1 | 16 | 0.179" | 4 7/8" | 5/8" | 3/4" | 4 | 3 1/2" | 600 psi @ 72° F | 300 psi @ 300° F | Black-Coated Steel | 00000000 | 000000 |
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: ASTM A105, ASME B16.5
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 80 steel
- Fittings: Use Class 3000 and Schedule 80 steel
Bolt Hole | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Dash Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Material | Each | |
Pressure Class 300 | |||||||||||
| 1 | 16 | 4 7/8" | 5/8" | 3/4" | 4 | 3 1/2" | 600 psi @ 72° F | 300 psi @ 300° F | Black-Coated Steel | 00000000 | 000000 |
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: See table
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 80 steel
- Fittings: Use Class 3000 and Schedule 80 steel
Bolt Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Dash Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Material | Specifications Met | Each | |
Pressure Class 300 | ||||||||||||
| 1 | 16 | 4 7/8" | 5/8" | 3/4" | 4 | 3 1/2" | 600 psi @ 72° F | 300 psi @ 300° F | Black-Coated Steel | ASME B16.5, ASTM A105 | 00000000 | 000000 |
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: ASTM A105, ASME B16.5
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 80 steel
- Fittings: Use Class 3000 and Schedule 80 steel
Bolt Hole | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Dash Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Material | Each | |
Pressure Class 300 | |||||||||||
| 1 | 16 | 4 7/8" | 5/8" | 3/4" | 4 | 3 1/2" | 600 psi @ 72° F | 300 psi @ 300° F | Black-Coated Steel | 00000000 | 000000 |
- For Use With: Air, Hydraulic Fluid, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: ASTM A105, ASME B16.5
- Certification: Material Certificate with Traceable Lot Number and Test Report
- Pipe Nipples and Pipe: Use Schedule 80 steel
- Fittings: Use Class 3000 and Schedule 80 steel
Bolt Hole | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Dash Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Material | Each | |
Pressure Class 300 | |||||||||||
| 1 | 16 | 4 7/8" | 5/8" | 3/4" | 4 | 3 1/2" | 600 psi @ 72° F | 300 psi @ 300° F | Black-Coated Steel | 00000000 | 000000 |
Medium-Pressure Steel Threaded Pipe Flanges
- For Use With: Air, Natural Gas, Oil, Steam, Water
- Pressure Class: See table
- Specifications Met: ASTM A105, ASME B16.5
- Pipe Nipples and Pipe: Use Schedule 80 steel
- Fittings: Use Class 300 or Schedule 80 iron and steel
With better strength than our low-pressure steel flanges, these are for use in medium-pressure applications. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line. Flanges are also known as Pressure Class 300 or Pressure Class 600 flanges. Use in noncorrosive environments.
For technical drawings and 3-D models, click on a part number.
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Max. Steam Pressure | Material | Each | |
NPT | ||||||||||
Pressure Class 300 | ||||||||||
| 1 | 4 7/8" | 5/8" | 3/4" | 4 | 3 1/2" | 600 psi @ 72° F | 300 psi @ 300° F | Black-Coated Steel | 00000000 | 000000 |
Pressure Class 600 | ||||||||||
| 1 | 4 7/8" | 3/4" | 3/4" | 4 | 3 1/2" | 1,400 psi @ 72° F | 1,300 psi @ 300° F | Black-Coated Steel | 00000000 | 00000 |
Medium-Pressure Galvanized Steel Threaded Pipe Flanges
- For Use With: Air, Natural Gas, Steam, Water
- Pressure Class : 300
- Specifications Met: ASTM A123, ASTM A105, ASME B16.5
- Pipe Nipples and Pipe: Use Schedule 80 steel
- Fittings: Use Class 300 iron or steel
A galvanized finish gives these flanges fair corrosion resistance. Also known as Pressure Class 300 flanges, they can withstand medium-pressure applications. Bolt two same-size flanges together with a gasket (sold separately) to create an access point within a line.
For technical drawings and 3-D models, click on a part number.
Bolt Hole | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flange OD | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Max. Pressure | Each | |
NPT | ||||||||
| 1 | 4 7/8" | 3/4" | 3/4" | 4 | 3 1/2" | 600 psi @ 72° F | 0000000 | 000000 |