Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Also known as Schedule 10 fittings, these are thin, lightweight, and corrosion resistant.

Use these corrosion-resistant fittings in a low-pressure pipe line.

Bolt two flanges of the same size together with a gasket to create an access point in a pipe line.

FM-approved for fire protection applications, these flanges are cast iron, so they're brittle and can be quickly opened by hitting them with a sledge hammer.

Forged for extra strength, these heavy duty unthreaded flanges can withstand high-pressure applications.

These flanges are for low-pressure applications in noncorrosive environments.

The galvanized finish on these Pressure Class 150 flanges provides fair corrosion resistance.

FM approved, these fittings are suitable for use in fire-protection systems. All have flat-surface flanged ends that only mate to another same-size flat-surface flange, pump, or valve with a gasket to create an access point in a pipeline.

In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications.

Also known as Pressure Class 150 flanges, these brass flanges are designed for low-pressure applications.

Bolt these flanges to another same-size flange with a gasket to create an access point within a pipe line. They are also known as Silbraze flanges.

Bolt two same-size flanges together with a gasket to create an access point within a line. They are also known as Pressure Class 150 flanges. Use in high-temperature plumbing and water supply applications up to 200° F.

These all-metal expansion joints can handle high temperatures up to 800° F.

The PTFE body on these expansion joints has a super-smooth surface that stands up to corrosive chemicals.

Crimp these fittings to copper tubing with a crimping tool for a leak-tight connection that doesn’t require heat or soldering. They are comparable to Viega ProPress fittings.

The included plastic sleeves and washers provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.

Each gasket comes with enough bolts and nuts to create a connection between two steel pipe flanges.

Furnished with plastic sleeves and washers to provide a layer of protection against dielectric corrosion, which occurs when different metals are joined.

Made of FDA-listed material for use with food and beverage.

Made of pure PTFE, these gaskets have a slippery surface that prevents sticking.

These gaskets resist boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.

Resistant to water and salts, these silicone rubber gaskets can handle temperatures up to 450° F.

Our highest temperature gaskets, these are made of vermiculite to withstand temperatures up to 1800° F.

Made of 110 copper, these gaskets handle steam applications up to 600° F. They are electrically conductive and resist water, Freon, and fuel oil.

A space between the outer ring and the sealing element prevents the element from being squeezed inward and contaminating the process line.

Able to withstand temperatures up to 750° F, these graphite gaskets have a stainless steel insert for strength to handle pressure up to 1,000 psi.

Our highest-temperature gaskets, these are made of vermiculite to withstand temperatures up to 1800° F.

Also known as Gore GR.

Often used with fiberglass flanges where you want to avoid overtightening, these gaskets seal under low torque. They’re made of soft, expanded PTFE that is also known as Gore UPG.

Reinforced with fiberglass filler for strength, these PTFE gaskets won't thin out when compressed.

Resistant to boric acid, citric acid, isopropyl alcohol, fuel, oil, and transmission fluid.

The all-SBR rubber construction of these gaskets provides better abrasion resistance than blended aramid/SBR gaskets.

Aramid fibers and SBR rubber are blended for resistance to water, inert gases, and abrasion.

Furnished with enough nuts and bolts to create a connection between two steel pipe flanges.

Create a tight seal on grooved-end pipe fittings that are exposed to oil. These gaskets are Buna-N, so they won't break down from oil.