Fit these wheels over your tool's arbor. The flexible flaps reduce gouging while producing a uniform finish on flat and curved surfaces.

With more flaps than standard discs, these last 30-40% longer.

With more flaps than standard discs, these last 30-40% longer.

A heavy duty backing plate provides more support than standard discs for heavy material removal.

Replace your sanding discs less often—the backing plate on these discs can be trimmed off as the abrasive flaps wear down, allowing you to use more of the disc.

The flaps wrap around the outer edge of these discs to sand welds at right angles.

Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.

With more flaps than standard discs, these last 30-40% longer.

The flaps have an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

Set at an angle and widely spaced, the flaps reach into corners.

With more flaps than standard discs, these last 30-40% longer.

The zirconia alumina grit on these discs continually fractures to produce new, sharp cutting edges that aggressively remove material from steel and wood.

The abrasive flaps wrap around the outer edge of these discs to reach in and sand welds at right angles (fillet welds).