Wraparound Plastic Submersible Cord Grips
Wrap the split gland of these grips around ethernet cables with an RJ45 connector or other already installed cables for a water-resistant seal with your enclosure. They’re rated IP68 and NEMA 6P, so they withstand use under water and protect electronics inside enclosures from moisture and harsh chemicals. All are made of nylon, making them corrosion and wear resistant. They relieve the strain on a cable when its pulled, extending the life of the cable.
When choosing a size, keep in mind that the sealing nut ID and body ID must be large enough for the end of your cord to fit through with the connector.
For technical drawings and 3-D models, click on a part number.
| For Cord OD | For Knockout Trade Size | Sealing Nut ID | Body ID | Temperature Range, °F | Features | Environmental Rating | Specifications Met | Each | |
NPT Threads  | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.21"-0.33" | 1/2 | 0.56" | 0.49" | 0° to 210° | Nylon Plastic Locknut, Split Gland | IP68, NEMA 6P | UL Recognized Component, C-UL Recognized Component, UL 94 V-2 | 0000000 | 00000 |
| 0.21"-0.33" | 3/4 | 0.72" | 0.72" | 0° to 210° | Nylon Plastic Locknut, Split Gland | IP68, NEMA 6P | UL Recognized Component, C-UL Recognized Component, UL 94 V-2 | 0000000 | 0000 |
| 0.25"-0.33" | 1 | 1.01" | 0.97" | 0° to 210° | Nylon Plastic Locknut, Split Gland | IP68, NEMA 6P | UL Recognized Component, C-UL Recognized Component, UL 94 V-2 | 0000000 | 0000 |
| 0.25"-0.33" | 1 1/4 | 1.27" | 1.25" | 0° to 210° | Nylon Plastic Locknut, Split Gland | IP68, NEMA 6P | UL Recognized Component, C-UL Recognized Component, UL 94 V-2 | 0000000 | 00000 |
PG Threads | |||||||||
| 0.21"-0.33" | PG-16 | 0.56" | 0.54" | 0° to 210° | Nylon Plastic Locknut, Split Gland | IP68, NEMA 6P | UL Recognized Component, C-UL Recognized Component, UL 94 V-2 | 00000000 | 0000 |
| 0.21"-0.33" | PG-21 | 0.72" | 0.71" | 0° to 210° | Nylon Plastic Locknut, Split Gland | IP68, NEMA 6P | UL Recognized Component, C-UL Recognized Component, UL 94 V-2 | 00000000 | 0000 |
| 0.25"-0.33" | PG-29 | 1.01" | 0.98" | 0° to 210° | Nylon Plastic Locknut, Split Gland | IP68, NEMA 6P | UL Recognized Component, C-UL Recognized Component, UL 94 V-2 | 00000000 | 0000 |
| 0.25"-0.33" | PG-36 | 1.27" | 1.26" | 0° to 210° | Nylon Plastic Locknut, Split Gland | IP68, NEMA 6P | UL Recognized Component, C-UL Recognized Component, UL 94 V-2 | 00000000 | 00000 |
Metric Threads | |||||||||
| 0.21"-0.33" | M20 | 0.56" | 0.54" | 0° to 210° | Nylon Plastic Locknut, Split Gland | IP68, NEMA 6P | UL Recognized Component, C-UL Recognized Component, UL 94 V-2 | 00000000 | 0000 |
| 0.21"-0.33" | M25 | 0.72" | 0.71" | 0° to 210° | Nylon Plastic Locknut, Split Gland | IP68, NEMA 6P | UL Recognized Component, C-UL Recognized Component, UL 94 V-2 | 00000000 | 0000 |
| 0.25"-0.33" | M32 | 1.01" | 0.98" | 0° to 210° | Nylon Plastic Locknut, Split Gland | IP68, NEMA 6P | UL Recognized Component, C-UL Recognized Component, UL 94 V-2 | 00000000 | 0000 |
| 0.25"-0.33" | M40 | 1.27" | 1.25" | 0° to 210° | Nylon Plastic Locknut, Split Gland | IP68, NEMA 6P | UL Recognized Component, C-UL Recognized Component, UL 94 V-2 | 00000000 | 00000 |
Flared Plastic Submersible Cord Grips
Secure cords installed through enclosures and panels in wet environments while protecting them against sharp bends. With a flared end that keeps cords from bending without limiting too much motion, these grips extend cord life. They’re good for cords used on handheld equipment. Made of polyamide, they stand up to corrosion and wear.
For technical drawings and 3-D models, click on a part number.
| For Cord OD | For Knockout Trade Size | Flare Diameter | Material | Temperature Range, °F | Features | Environmental Rating | Specifications Met | Each | |
PG Threads | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 0.13"-0.31" | PG-9 | 15/16" | Gray Polyamide Plastic | 0° to 175° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 12, IP68 | UL Listed, C-UL Listed, CE Marked | 0000000 | 00000 |
| 0.15"-0.39" | PG-11 | 1 1/8" | Gray Polyamide Plastic | 0° to 175° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 12, IP68 | UL Listed, C-UL Listed, CE Marked | 0000000 | 0000 |
| 0.23"-0.47" | PG-13.5 | 1 1/4" | Gray Polyamide Plastic | 0° to 175° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 12, IP68 | UL Listed, C-UL Listed, CE Marked | 0000000 | 0000 |
| 0.35"-0.55" | PG-16 | 1 3/8" | Gray Polyamide Plastic | 0° to 175° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 12, IP68 | UL Listed, C-UL Listed, CE Marked | 0000000 | 0000 |
| 0.51"-0.71" | PG-21 | 1 5/8" | Gray Polyamide Plastic | 0° to 175° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 12, IP68 | UL Listed, C-UL Listed, CE Marked | 0000000 | 0000 |
Metric Threads | |||||||||
| 0.13"-0.31" | M16 | 15/16" | Gray Polyamide Plastic | 0° to 175° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 12, IP68 | UL Recognized Component, C-UL Recognized Component, CE Marked | 0000000 | 0000 |
| 0.19"-0.47" | M20 | 1 1/4" | Gray Polyamide Plastic | 0° to 175° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 12, IP68 | UL Listed, C-UL Listed, CE Marked | 0000000 | 0000 |
| 0.35"-0.55" | M25 | 1 3/8" | Gray Polyamide Plastic | 0° to 175° | Nylon Plastic Locknut, Rubber O-Ring | NEMA 12, IP68 | UL Listed, C-UL Listed, CE Marked | 0000000 | 0000 |