ISO 2009 Flat Head Screws

Filter by

System of Measurement

Thread Size

Length

Drive Style

Fastener Head Type

Material

Head Diameter

Flat Head Profile

Thread Pitch

Head Height

Specifications Met

Federal Specification

Countersink Angle

Thread Type

Threading

Tip Type

Finish

Thread Fit

Thread Direction

Hardness

Tensile Strength

60,000 psi to 69,999 psi

70,000 psi to 99,999 psi

RoHS

Compliant

Compliant with Exemptions

REACH

Compliant

DFARS Specialty Metals

Exempt

Not Compliant

Export Control Classification Number (ECCN)

Thread Spacing

Performance

106 Products

Performance

Corrosion Resistant

Resist corrosion from moisture, chemicals, and harsh weather

70 products

Conductive

Conduct electricity better than other screws

26 products

Performance

Nonmagnetic

Won't damage or interfere with electronics

26 products

Stainless Steel Slotted Flat Head Screws

The most corrosion-resistant slotted flat head screws we offer. Made of stainless steel, they won't rust or corrode when exposed to moisture or chemicals. With only two contact points, the slotted drive is the most basic drive style. The slot can't withstand much torque, so it's best to hand-tighten them instead of using power tools.

Length is measured from the top of the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

				Head, mm
	Lg., mm	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				M1.6 × 0.35 mm

				4	90°	Standard	3.00	0.96	Fully Threaded	70,000	DIN 963, ISO 2009	25	000000000	000000


				5	90°	Standard	3.00	0.96	Fully Threaded	70,000	DIN 963, ISO 2009	25	000000000	00000
				8	90°	Standard	3.00	0.96	Fully Threaded	70,000	DIN 963, ISO 2009	25	000000000	0000
				10	90°	Standard	3.00	0.96	Fully Threaded	70,000	DIN 963, ISO 2009	25	000000000	0000




						M2 × 0.4 mm

						4	90°	Standard	3.80	1.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000


						5	90°	Standard	3.80	1.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
						6	90°	Standard	3.80	1.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
						8	90°	Standard	3.80	1.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
						10	90°	Standard	3.80	1.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
						12	90°	Standard	3.80	1.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
						16	90°	Standard	3.80	1.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000




								M2.5 × 0.45 mm

								4	90°	Standard	4.70	1.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000


								5	90°	Standard	4.70	1.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
								6	90°	Standard	4.70	1.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
								8	90°	Standard	4.70	1.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
								10	90°	Standard	4.70	1.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
								12	90°	Standard	4.70	1.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000




										M3 × 0.5 mm

										5	90°	Standard	5.60	1.65	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000


										6	90°	Standard	5.60	1.65	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
										8	90°	Standard	5.60	1.65	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
										10	90°	Standard	5.60	1.65	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
										12	90°	Standard	5.60	1.65	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
										16	90°	Standard	5.60	1.65	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
										20	90°	Standard	5.60	1.65	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000




												M4 × 0.7 mm

6	90°											Standard	7.50	2.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000


8	90°											Standard	7.50	2.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
10	90°	Standard										7.50	2.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
12	90°	Standard	7.50									2.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	0000
16	90°	Standard	7.50									2.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
20	90°	Standard	7.50									2.20	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000




		M5 × 0.8 mm

		10	90°									Standard	9.20	2.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000


		12	90°	Standard								9.20	2.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
		16	90°	Standard	9.20							2.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
		20	90°	Standard	9.20							2.50	Fully Threaded	70,000	DIN 963, ISO 2009	100	000000000	00000
		25	90°	Standard	9.20							2.50	Fully Threaded	70,000	DIN 963, ISO 2009	50	000000000	00000




				M6 × 1 mm

				10	90°							Standard	11.00	3.00	Fully Threaded	70,000	DIN 963, ISO 2009	50	000000000	00000


				12	90°							Standard	11.00	3.00	Fully Threaded	70,000	DIN 963, ISO 2009	50	000000000	0000
				16	90°							Standard	11.00	3.00	Fully Threaded	70,000	DIN 963, ISO 2009	50	000000000	00000
				20	90°							Standard	11.00	3.00	Fully Threaded	70,000	DIN 963, ISO 2009	50	000000000	00000
				25	90°	Standard						11.00	3.00	Fully Threaded	70,000	DIN 963, ISO 2009	50	000000000	00000
				30	90°	Standard	11.00					3.00	Fully Threaded	70,000	DIN 963, ISO 2009	25	000000000	0000




						M8 × 1.25 mm

						16	90°					Standard	14.50	4.00	Fully Threaded	70,000	DIN 963, ISO 2009	25	000000000	00000


						20	90°					Standard	14.50	4.00	Fully Threaded	70,000	DIN 963, ISO 2009	25	000000000	00000
						25	90°					Standard	14.50	4.00	Fully Threaded	70,000	DIN 963, ISO 2009	25	000000000	00000

Steel Slotted Flat Head Screws

A simple yet effective drive style for light duty tasks. With only two contact points, the slotted drive is the most basic drive style. The slot can't withstand much torque, so it's best to hand-tighten them instead of using power tools.

Length is measured from the top of the head.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

				Head, mm
	Lg., mm	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated Steel







				M2 × 0.4 mm

				4	90°	Standard	3.80	1.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000


				5	90°	Standard	3.80	1.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
				6	90°	Standard	3.80	1.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000




						M3 × 0.5 mm

						5	90°	Standard	5.60	1.65	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000


						6	90°	Standard	5.60	1.65	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
						8	90°	Standard	5.60	1.65	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
						10	90°	Standard	5.60	1.65	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
						16	90°	Standard	5.60	1.65	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000




								M4 × 0.7 mm

								5	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000


								6	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
								8	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
								10	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
								12	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
								16	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
								20	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
								25	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000
								35	90°	Standard	7.50	2.20	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000




										M5 × 0.8 mm

										8	90°	Standard	9.20	2.50	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000


										10	90°	Standard	9.20	2.50	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
										12	90°	Standard	9.20	2.50	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
										16	90°	Standard	9.20	2.50	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000
										25	90°	Standard	9.20	2.50	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000




												M6 × 1 mm

												10	90°	Standard	11.00	3.00	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000


12	90°											Standard	11.00	3.00	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	0000
16	90°											Standard	11.00	3.00	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000
20	90°											Standard	11.00	3.00	Fully Threaded	60,000	DIN 963, ISO 2009	100	000000000	00000
25	90°	Standard										11.00	3.00	Fully Threaded	60,000	DIN 963, ISO 2009	50	000000000	0000
40	90°	Standard	11.00									3.00	Fully Threaded	60,000	DIN 963, ISO 2009	50	000000000	00000
50	90°	Standard	11.00									3.00	Fully Threaded	60,000	DIN 963, ISO 2009	50	000000000	00000




		M8 × 1.25 mm

		16	90°									Standard	14.50	4.00	Fully Threaded	60,000	DIN 963, ISO 2009	50	000000000	00000


		25	90°	Standard								14.50	4.00	Fully Threaded	60,000	DIN 963, ISO 2009	50	000000000	00000




				M10 × 1.5 mm

				20	90°							Standard	18.00	5.00	Fully Threaded	60,000	DIN 963, ISO 2009	25	000000000	00000


				25	90°							Standard	18.00	5.00	Fully Threaded	60,000	DIN 963, ISO 2009	25	000000000	00000
				30	90°							Standard	18.00	5.00	Fully Threaded	60,000	DIN 963, ISO 2009	10	000000000	0000
				35	90°							Standard	18.00	5.00	Fully Threaded	60,000	DIN 963, ISO 2009	10	000000000	0000
				40	90°							Standard	18.00	5.00	Fully Threaded	60,000	DIN 963, ISO 2009	10	000000000	00000

Brass Slotted Flat Head Screws

Conductive and nonmagnetic, these slotted screws are often used to secure electrical equipment, such as circuit boards, inside enclosures. Made of brass, they also resist corrosion in humid environments. With only two contact points, the slotted drive is the most basic drive style. The slot can't withstand much torque, so it's best to hand-tighten them instead of using power tools.

Length is measured from the top of the head.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

				Head, mm
	Lg., mm	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
Brass







				M2 × 0.4 mm

				4	90°	Standard	3.80	1.20	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	000000


				5	90°	Standard	3.80	1.20	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	0000
				6	90°	Standard	3.80	1.20	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	0000
				10	90°	Standard	3.80	1.20	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	0000
				12	90°	Standard	3.80	1.20	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	00000




						M3 × 0.5 mm

						6	90°	Standard	5.50	1.65	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	0000


						8	90°	Standard	5.50	1.65	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	0000
						10	90°	Standard	5.50	1.65	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	0000
						12	90°	Standard	5.50	1.65	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	0000
						16	90°	Standard	5.50	1.65	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	0000




								M4 × 0.7 mm

								8	90°	Standard	7.50	2.20	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	00000


								10	90°	Standard	7.50	2.20	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	00000
								12	90°	Standard	7.50	2.20	Fully Threaded	50,000	DIN 963, ISO 2009	50	000000000	00000
								16	90°	Standard	7.50	2.20	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000
								20	90°	Standard	7.50	2.20	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000
								25	90°	Standard	7.50	2.20	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000




										M5 × 0.8 mm

										10	90°	Standard	9.20	2.50	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000


										12	90°	Standard	9.20	2.50	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000
										16	90°	Standard	9.20	2.50	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000
										20	90°	Standard	9.20	2.50	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000
										25	90°	Standard	9.20	2.50	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000




												M6 × 1 mm

												12	90°	Standard	11.00	3.00	Fully Threaded	50,000	DIN 963, ISO 2009	25	000000000	00000


16	90°											Standard	11.00	3.00	Fully Threaded	50,000	DIN 963, ISO 2009	10	000000000	0000
20	90°											Standard	11.00	3.00	Fully Threaded	50,000	DIN 963, ISO 2009	10	000000000	00000
25	90°											Standard	11.00	3.00	Fully Threaded	50,000	DIN 963, ISO 2009	10	000000000	00000
30	90°											Standard	11.00	3.00	Fully Threaded	50,000	DIN 963, ISO 2009	10	000000000	00000