SAE Standard Flat Head Screws

Filter by

System of Measurement

Thread Size

Length

Countersink Angle

Fastener Head Type

Drive Style

Material

Specifications Met

Federal Specification

Flat Head Profile

Head Diameter

Finish

Certification

Military Specification

DFARS Specialty Metals

Head Height

Threading

Screw Size

Tip Type

Thread Type

REACH

RoHS

Tensile Strength

70,000 psi to 99,999 psi

100,000 psi to 129,999 psi

130,000 psi or greater

Thread Spacing

Coarse

Fine

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Drive Size

Export Control Classification Number (ECCN)

EAR99

Forward

How can we improve?

372 Products

Stainless Steel Phillips Flat Head Screws

These screws are made of stainless steel, so they won't rust or corrode when exposed to moisture and chemicals. The Phillips drive has a cross-shaped opening in which a driver fits snugly for easy alignment. With four contact points, they withstand more torque than slotted drives, but drivers slip when you apply too much force.

Length is measured from the top of the head.

18-8 Stainless Steel—The choice for wet and outdoor environments, these screws won't rust. However, they don't hold up to the harsh chemicals that 316 stainless steel can.

Black-Oxide 18-8 Stainless Steel—Typically chosen for their appearance, these screws have a dark, matte coating to create a finished look. They won't rust in wet and outdoor environments, but they don't hold up to the harsh chemicals that 316 stainless steel can.

Standard Profile—Standard-profile heads are the most common choice for flat head screws.

Undercut Profile—About a third thinner than standard heads, the undercut profile fits into shallow holes in thin material. The thin head also has more threading on the shaft, so they're often used to keep short screws from coming loose.

Military Specification—These screws are manufactured and tested to meet strict U.S. military standards for material and construction.

				Head
	Lg.	Countersink Angle	Flat Head Profile	Dia.	Ht.	Threading	Tensile Strength, psi	Specs. Met	Mil. Spec.	Pkg. Qty.		Pkg.
18-8 Stainless Steel







				0-80

				1/8"	82°	Undercut	0.119"	0.025"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-1	10	000000000	00000


				3/16"	82°	Standard	0.119"	0.035"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-2	50	000000000	0000
				1/4"	82°	Standard	0.119"	0.035"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-3	10	000000000	0000
				5/16"	82°	Standard	0.119"	0.035"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-4	100	000000000	00000
				5/16"	100°	Standard	0.119"	0.026"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C422	50	000000000	0000
				3/8"	82°	Standard	0.119"	0.035"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-5	100	000000000	00000
				3/8"	100°	Standard	0.119"	0.026"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C423	50	000000000	0000




						2-56

						1/8"	82°	Undercut	0.172"	0.036"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-1	50	000000000	0000


						1/8"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C16	50	000000000	0000
						5/32"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C17	50	000000000	0000
						3/16"	82°	Standard	0.172"	0.051"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-2	100	000000000	00000
						3/16"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NAS662C2R3, SAE AMS2700	—	100	000000000	00000
						1/4"	82°	Standard	0.172"	0.051"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-3	100	000000000	00000
						1/4"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NAS662C2R4, SAE AMS2700	—	100	000000000	00000
						5/16"	82°	Standard	0.172"	0.051"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-4	100	000000000	00000
						5/16"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NAS662C2R5, SAE AMS2700	—	100	000000000	00000
						3/8"	82°	Standard	0.172"	0.051"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-5	100	000000000	00000
						3/8"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NAS662C2R6, SAE AMS2700	—	100	000000000	00000


						7/16"	82°	Standard	0.172"	0.051"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-6	50	000000000	0000
						1/2"	82°	Standard	0.172"	0.051"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-7	100	000000000	00000
						1/2"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NAS662C2R8, SAE AMS2700	—	100	000000000	00000
						5/8"	82°	Standard	0.172"	0.051"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-8	50	000000000	00000
						3/4"	82°	Standard	0.172"	0.051"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-9	50	000000000	00000
						7/8"	82°	Standard	0.172"	0.051"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-10	25	000000000	0000




								4-40

								3/16"	82°	Undercut	0.225"	0.047"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-12	50	000000000	0000


								3/16"	100°	Standard	0.225"	0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C1	100	000000000	00000
								1/4"	82°	Standard	0.225"	0.067"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-13	100	000000000	00000
								1/4"	100°	Standard	0.225"	0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C2	100	000000000	00000
								5/16"	82°	Standard	0.225"	0.067"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-14	100	000000000	00000
								5/16"	100°	Standard	0.225"	0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C3	100	000000000	00000
								3/8"	82°	Standard	0.225"	0.067"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-15	100	000000000	00000
								3/8"	100°	Standard	0.225"	0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C4	100	000000000	00000
								7/16"	82°	Standard	0.225"	0.067"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-16	50	000000000	00000
								7/16"	100°	Standard	0.225"	0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C5	100	000000000	00000
								1/2"	82°	Standard	0.225"	0.067"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-17	50	000000000	0000


1/2"	100°							Standard	0.225"	0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C6	100	000000000	00000
5/8"	82°							Standard	0.225"	0.067"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-18	50	000000000	00000
5/8"	100°							Standard	0.225"	0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C7	100	000000000	00000
3/4"	82°	Standard						0.225"	0.067"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-19	50	000000000	00000
3/4"	100°	Standard	0.225"					0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C8	50	000000000	00000
7/8"	82°	Standard	0.225"					0.067"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-20	50	000000000	00000
7/8"	100°	Standard	0.225"					0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C9	50	000000000	00000
1"	82°	Standard	0.225"					0.067"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-21	50	000000000	00000
1"	100°	Standard	0.225"					0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C10	25	000000000	0000
1 1/8"	100°	Standard	0.225"					0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C11	25	000000000	0000


1 1/4"	82°	Standard	0.225"					0.067"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-22	50	000000000	00000
1 1/4"	100°	Standard	0.225"					0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C12	50	000000000	00000
1 1/2"	82°	Standard	0.225"					0.067"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-23	25	000000000	0000
1 1/2"	100°	Standard	0.225"					0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C14	25	000000000	0000




		6-32

		3/16"	82°	Undercut	0.279"			0.059"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-25	25	000000000	0000


		3/16"	100°	Standard	0.279"			0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C23	100	000000000	00000
		1/4"	82°	Standard	0.279"			0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-26	50	000000000	0000
		1/4"	100°	Standard	0.279"			0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C24	100	000000000	00000
		5/16"	82°	Standard	0.279"			0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-27	50	000000000	00000
		5/16"	100°	Standard	0.279"			0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C25	100	000000000	00000
		3/8"	82°	Standard	0.279"			0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-28	50	000000000	00000
		3/8"	100°	Standard	0.279"			0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C26	100	000000000	00000
		7/16"	82°	Standard	0.279"			0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-29	50	000000000	0000
		7/16"	100°	Standard	0.279"			0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C27	50	000000000	00000
		1/2"	82°	Standard	0.279"			0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-30	50	000000000	00000


		1/2"	100°	Standard	0.279"			0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C28	50	000000000	00000
		5/8"	82°	Standard	0.279"			0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-31	50	000000000	00000
		5/8"	100°	Standard	0.279"			0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C29	50	000000000	00000
		3/4"	82°	Standard	0.279"			0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-32	50	000000000	00000
		3/4"	100°	Standard	0.279"			0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C30	50	000000000	00000
		7/8"	82°	Standard	0.279"			0.081"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-33	50	000000000	00000
		7/8"	100°	Standard	0.279"			0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C31	50	000000000	00000
		1"	82°	Standard	0.279"			0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-34	25	000000000	00000
		1"	100°	Standard	0.279"			0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C32	25	000000000	0000
		1 1/8"	100°	Standard	0.279"	0.06"		Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C33	25	000000000	0000


		1 1/4"	82°	Standard	0.279"	0.081"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-35	25	000000000	00000
		1 1/4"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C34	25	000000000	00000
		1 1/2"	82°	Standard	0.279"	0.081"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-36	25	000000000	00000
		1 1/2"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C36	10	000000000	0000
		1 3/4"	82°	Standard	0.279"	0.081"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-37	25	000000000	00000
		2"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C40	10	000000000	0000
		2 1/2"	100°	Standard	0.279"	0.06"	Partially Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C42	10	000000000	00000




				8-32

				1/4"	82°	Undercut	0.332"	0.07"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-41	50	000000000	00000


				1/4"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C46	50	000000000	00000
				5/16"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-42	50	000000000	0000
				5/16"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C47	50	000000000	00000
				3/8"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-43	50	000000000	00000
				3/8"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C48	50	000000000	00000
				7/16"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-44	50	000000000	00000
				7/16"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C49	50	000000000	0000
				1/2"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-45	50	000000000	00000
				1/2"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C50	50	000000000	00000
				5/8"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-46	50	000000000	00000


				5/8"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C51	50	000000000	00000
				3/4"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-47	25	000000000	00000
				3/4"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C52	50	000000000	00000
				7/8"	82°	Standard	0.332"	0.1"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-48	25	000000000	00000
				7/8"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C53	25	000000000	0000
1"				82°	Standard	0.332"	0.1"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-49	25	000000000	00000
1"	100°			Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C54	25	000000000	00000
1 1/8"	100°			Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C55	25	000000000	00000
1 1/4"	82°			Standard	0.332"	0.1"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-50	25	000000000	00000
1 1/4"	100°			Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C56	25	000000000	00000


1 1/2"	82°			Standard	0.332"	0.1"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-51	25	000000000	00000
1 1/2"	100°			Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C58	10	000000000	0000
1 3/4"	82°			Standard	0.332"	0.1"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-52	10	000000000	0000
1 3/4"	100°			Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C60	10	000000000	0000
2"	82°			Standard	0.332"	0.1"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-53	10	000000000	0000
2"	100°			Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C62	10	000000000	0000
2 1/4"	82°			Standard	0.332"	0.1"	Partially Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-54	10	000000000	00000
2 1/2"	82°			Standard	0.332"	0.1"	Partially Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-55	10	000000000	00000
2 1/2"	100°			Standard	0.332"	0.072"	Partially Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C64	10	000000000	0000




				10-24

				5/16"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C69	50	000000000	00000


				3/8"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-61	25	000000000	00000
				3/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C70	25	000000000	00000
				7/16"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-62	25	000000000	00000
				7/16"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C71	25	000000000	0000
				1/2"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-63	25	000000000	00000
				1/2"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C72	25	000000000	00000
				5/8"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-64	25	000000000	00000
				5/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C73	25	000000000	0000
				3/4"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-65	25	000000000	00000
				3/4"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C74	10	000000000	0000


				7/8"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-66	25	000000000	00000
				1"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-67	25	000000000	00000
				1 1/4"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C78	10	000000000	0000
		1 1/2"		100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C80	10	000000000	0000
		2"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C84	10	000000000	0000




				10-32

				1/4"	82°	Undercut	0.385"	0.081"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-61	10	000000000	0000


				1/4"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C268	25	000000000	0000
				5/16"	82°	Undercut	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-62	10	000000000	0000
				5/16"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C269	25	000000000	0000
				3/8"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-63	25	000000000	0000
				3/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C270	50	000000000	00000
				7/16"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-64	10	000000000	0000
				7/16"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C271	50	000000000	00000
				1/2"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-65	25	000000000	0000
				1/2"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C272	25	000000000	00000
				5/8"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-66	25	000000000	00000


				5/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C273	25	000000000	00000
				3/4"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-67	25	000000000	00000
				3/4"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C274	25	000000000	00000
				7/8"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-68	10	000000000	0000
				7/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C275	25	000000000	00000
				1"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-69	10	000000000	0000
				1"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C276	25	000000000	00000
				1 1/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C277	10	000000000	0000
				1 1/4"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-70	25	000000000	00000
				1 1/4"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C278	10	000000000	0000


				1 3/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C279	10	000000000	0000
				1 1/2"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-71	10	000000000	0000
				1 1/2"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C280	10	000000000	0000
				1 5/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C281	10	000000000	0000
				1 3/4"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C282	10	000000000	00000
				1 7/8"	100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C283	10	000000000	00000
				2"	82°	Standard	0.385"	0.116"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-73	10	000000000	00000
2"				100°	Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C284	10	000000000	0000
2 1/4"	82°			Standard	0.385"	0.116"	Partially Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-74	10	000000000	00000
2 1/4"	100°			Standard	0.385"	0.083"	Partially Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C285	10	000000000	00000


2 1/2"	100°			Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C286	10	000000000	00000




				1/4"-20

				3/8"	82°	Undercut	0.507"	0.107"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-77	10	000000000	00000


				7/16"	82°	Undercut	0.507"	0.107"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-78	10	000000000	00000
				7/16"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C93	10	000000000	00000
				1/2"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-79	10	000000000	0000
				1/2"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C94	10	000000000	00000
				5/8"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-80	10	000000000	00000
				5/8"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C95	10	000000000	00000
				3/4"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-81	10	000000000	00000
				3/4"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C96	25	000000000	00000
				7/8"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-82	10	000000000	00000
				1"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-83	10	000000000	00000


		1"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C98	10	000000000	0000
		1 1/8"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C99	10	000000000	00000
		1 1/4"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-84	10	000000000	0000
		1 1/4"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C100	10	000000000	00000
		1 1/2"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-85	10	000000000	00000
		1 3/4"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-86	5	000000000	0000
		2"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-87	5	000000000	00000
		2 1/2"	82°	Standard	0.507"	0.153"	Partially Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-89	5	000000000	00000




				1/4"-28

				7/16"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C293	10	000000000	0000


				1/2"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-82	10	000000000	00000
				1/2"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C294	10	000000000	0000
				5/8"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-83	10	000000000	00000
				5/8"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C295	10	000000000	0000
				3/4"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-84	5	000000000	0000
				3/4"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C296	10	000000000	00000
				7/8"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-85	5	000000000	0000
				7/8"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C297	10	000000000	00000
				1"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-86	5	000000000	00000
				1"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C298	10	000000000	00000


				1 1/8"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C299	10	000000000	00000
				1 1/4"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-87	5	000000000	00000
				1 1/4"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C300	10	000000000	00000
				1 5/8"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C303	5	000000000	00000
				1 3/4"	82°	Standard	0.507"	0.153"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51960-89	5	000000000	00000
				1 3/4"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C304	5	000000000	00000
				1 7/8"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C305	1	000000000	0000
				2"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-C306	1	000000000	0000




						3/8"-16

						1"	82°	Standard	0.762"	0.23"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-111	5	000000000	00000


1 1/4"	82°					Standard	0.762"	0.23"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-112	5	000000000	00000
1 1/2"	82°					Standard	0.762"	0.23"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, SAE AMS2700	MS51959-113	5	000000000	0000


Black-Oxide 18-8 Stainless Steel







								0-80

								3/16"	100°	Standard	0.119"	0.026"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-420B	25	000000000	0000




										2-56

										1/8"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-16B	25	000000000	00000


										5/32"	100°	Standard	0.172"	0.037"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-17B	25	000000000	00000




		4-40

		3/16"	100°									Standard	0.225"	0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-1B	25	000000000	00000


		1/4"	100°									Standard	0.225"	0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-2B	25	000000000	0000
		5/16"	100°									Standard	0.225"	0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-3B	25	000000000	00000
		3/8"	100°									Standard	0.225"	0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-4B	25	000000000	00000
		7/16"	100°									Standard	0.225"	0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-5B	25	000000000	0000
		1/2"	100°									Standard	0.225"	0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-6B	25	000000000	00000
		5/8"	100°									Standard	0.225"	0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-7B	25	000000000	00000
		3/4"	100°									Standard	0.225"	0.049"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-8B	25	000000000	0000




												6-32

												3/16"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-23B	25	000000000	0000


												1/4"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-24B	25	000000000	0000
												5/16"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-25B	25	000000000	00000
												3/8"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-26B	25	000000000	00000
												7/16"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-27B	25	000000000	00000
												1/2"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-28B	25	000000000	0000
												5/8"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-29B	25	000000000	00000
												3/4"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-30B	25	000000000	00000
												7/8"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-31B	25	000000000	00000
												1"	100°	Standard	0.279"	0.06"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-32B	25	000000000	00000




												8-32

												1/4"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-46B	25	000000000	0000


												5/16"	100°	Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-47B	25	000000000	00000
3/8"												100°	Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-48B	25	000000000	00000
7/16"	100°											Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-49B	25	000000000	0000
1/2"	100°											Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-50B	25	000000000	00000
5/8"	100°											Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-51B	25	000000000	00000
3/4"	100°											Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-52B	25	000000000	00000
7/8"	100°											Standard	0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-53B	25	000000000	00000
1"	100°					Standard						0.332"	0.072"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-54B	10	000000000	0000




						10-32

						1/4"	100°					Standard	0.385"	0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-268B	25	000000000	00000


						5/16"	100°	Standard	0.385"			0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-269B	25	000000000	00000
						3/8"	100°	Standard	0.385"			0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-270B	25	000000000	00000
						7/16"	100°	Standard	0.385"			0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-271B	25	000000000	00000
						1/2"	100°	Standard	0.385"			0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-272B	25	000000000	00000
						5/8"	100°	Standard	0.385"			0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-273B	25	000000000	00000
						3/4"	100°	Standard	0.385"			0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-274B	10	000000000	0000
						7/8"	100°	Standard	0.385"			0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-275B	10	000000000	0000
						1"	100°	Standard	0.385"			0.083"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-276B	10	000000000	0000




								1/4"-20

								1/2"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-94B	10	000000000	00000


								5/8"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-95B	10	000000000	00000
								3/4"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-96B	10	000000000	00000
								1"	100°	Standard	0.507"	0.11"	Fully Threaded	70,000	Fed. Spec. FF-S-92, Fed. Spec. QQ-P-35, NASM24693, SAE AMS2700	MS24693-98B	10	000000000	00000

Steel Phillips Flat Head Thread-Cutting Screws

Cut threads as you drive these screws, and their beveled head sits neatly inside countersunk holes. They remove material to create threads, so they’re easier to install and put less stress on your workpiece than thread-forming screws. The Phillips drive handles enough torque to keep drivers from slipping.

Length is measured from the top of the head.

Black-Oxide Steel—Typically chosen for their appearance, these screws have a dark, matte coating for a finished look. They offer minimal corrosion resistance, so they're best for dry environments.

Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.

		Head
	Lg.	Dia.	Ht.	Tapping Screw Type	Drive Size	Approx. Threads per In.	Countersink Angle	Flat Head Profile	Drill Bit Size	Shank Cross Section	Specs. Met	Pkg. Qty.		Pkg.
Black-Oxide Steel







				No. 2 Screw Size

				1/4"	0.162"	0.051"	F	No. 1	56	82°	Standard	49 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	000000




						No. 4 Screw Size

						3/8"	0.212"	0.067"	F	No. 1	40	82°	Standard	41 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000




								No. 6 Screw Size

								3/8"	0.262"	0.083"	F	No. 2	32	82°	Standard	31 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000


								1/2"	0.262"	0.083"	F	No. 2	32	82°	Standard	31 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000
								5/8"	0.262"	0.083"	F	No. 2	32	82°	Standard	31 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
								3/4"	0.262"	0.083"	F	No. 2	32	82°	Standard	31 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	0000




										No. 8 Screw Size

										3/8"	0.312"	0.1"	F	No. 2	32	82°	Standard	26 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000


										1/2"	0.312"	0.1"	F	No. 2	32	82°	Standard	26 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	0000
										5/8"	0.312"	0.1"	F	No. 2	32	82°	Standard	26 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	0000
										3/4"	0.312"	0.1"	F	No. 2	32	82°	Standard	26 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
										1"	0.312"	0.1"	F	No. 2	32	82°	Standard	26 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
										1 1/4"	0.312"	0.1"	F	No. 2	32	82°	Standard	26 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000




												No. 10 Screw Size

												3/4"	0.362"	0.116"	F	No. 2	24	82°	Standard	17 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000


												3/4"	0.362"	0.116"	F	No. 2	32	82°	Standard	16 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
												1"	0.362"	0.116"	F	No. 2	24	82°	Standard	17 Ga.	Round	ASME B18.6.3, SAE J933	10	000000000	00000
												1"	0.362"	0.116"	F	No. 2	32	82°	Standard	16 Ga.	Round	ASME B18.6.3, SAE J933	10	000000000	0000
												1 1/4"	0.362"	0.116"	F	No. 2	24	82°	Standard	17 Ga.	Round	ASME B18.6.3, SAE J933	10	000000000	00000
												1 1/2"	0.362"	0.116"	F	No. 2	32	82°	Standard	16 Ga.	Round	ASME B18.6.3, SAE J933	10	000000000	00000




														No. 12 Screw Size

														1/2"	0.412"	0.132"	F	No. 3	24	82°	Standard	8 Ga.	Round	ASME B18.6.3, SAE J933	10	000000000	0000




														1/4" Screw Size

		3/4"	0.477"											0.153"	F	No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	10	000000000	00000


		1"	0.477"											0.153"	F	No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	10	000000000	00000
		1 1/4"	0.477"											0.153"	F	No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	10	000000000	00000
		2 1/4"	0.477"											0.153"	F	No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	5	000000000	00000
		2 1/2"	0.477"	0.153"										F	No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	5	000000000	00000


		Zinc-Plated Steel







						No. 2 Screw Size

						1/8"	0.162"							0.036"	F	No. 1	56	82°	Undercut	49 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000


						3/16"	0.162"							0.036"	F	No. 1	56	82°	Undercut	49 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
						1/4"	0.162"							0.051"	F	No. 1	56	82°	Standard	49 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000
						5/16"	0.162"							0.051"	F	No. 1	56	82°	Standard	49 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000
						3/8"	0.162"							0.051"	F	No. 1	56	82°	Standard	49 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000




								No. 4 Screw Size

								1/4"	0.212"					0.047"	F	No. 1	40	82°	Undercut	41 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000


								5/16"	0.212"					0.047"	F	No. 1	40	82°	Undercut	41 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000
								3/8"	0.212"					0.067"	F	No. 1	40	82°	Standard	41 Ga.	Round	ASME B18.6.3, SAE J933	100	000000000	00000
								1/2"	0.212"					0.067"	F	No. 1	40	82°	Standard	41 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000
								5/8"	0.212"					0.067"	F	No. 1	40	82°	Standard	41 Ga.	Round	ASME B18.6.3, SAE J933	100	000000000	00000
								3/4"	0.212"					0.067"	F	No. 1	40	82°	Standard	41 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000




										No. 6 Screw Size

										1/4"	0.262"			0.059"	F	No. 2	32	82°	Undercut	31 Ga.	Round	ASME B18.6.3, SAE J933	100	000000000	00000


										3/8"	0.262"			0.083"	F	No. 2	32	82°	Standard	31 Ga.	Round	ASME B18.6.3, SAE J933	100	000000000	0000
										1/2"	0.262"			0.083"	F	No. 2	32	82°	Standard	31 Ga.	Round	ASME B18.6.3, SAE J933	100	000000000	00000
										3/4"	0.262"			0.083"	F	No. 2	32	82°	Standard	31 Ga.	Round	ASME B18.6.3, SAE J933	100	000000000	00000
										7/8"	0.262"			0.083"	F	No. 2	32	82°	Standard	31 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000
										1"	0.262"			0.083"	F	No. 2	32	82°	Standard	31 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000
										1 1/4"	0.262"			0.083"	F	No. 2	32	82°	Standard	31 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000
										1 1/2"	0.262"			0.083"	F	No. 2	32	82°	Standard	31 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000




No. 8 Screw Size

3/8"	0.312"											0.07"	F	No. 2	32	82°	Undercut	26 Ga.	Round	ASME B18.6.3, SAE J933	100	000000000	00000


1/2"	0.312"											0.1"	F	No. 2	32	82°	Standard	26 Ga.	Round	ASME B18.6.3, SAE J933	100	000000000	00000
3/4"	0.312"											0.1"	F	No. 2	32	82°	Standard	26 Ga.	Round	ASME B18.6.3, SAE J933	100	000000000	00000
1"	0.312"											0.1"	F	No. 2	32	82°	Standard	26 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000
1 1/4"	0.312"											0.1"	F	No. 2	32	82°	Standard	26 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
1 1/2"	0.312"											0.1"	F	No. 2	32	82°	Standard	26 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
1 3/4"	0.312"											0.1"	F	No. 2	32	82°	Standard	26 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000




		No. 10 Screw Size

		1/2"	0.362"									0.081"	F	No. 2	24	82°	Undercut	17 Ga.	Round	ASME B18.6.3, SAE J933	100	000000000	00000


		1/2"	0.362"									0.081"	F	No. 2	32	82°	Undercut	17 Ga.	Round	ASME B18.6.3, SAE J933	100	000000000	00000
		5/8"	0.362"	0.116"								F	No. 2	24	82°	Standard	17 Ga.	Round	ASME B18.6.3, SAE J933	100	000000000	00000
		5/8"	0.362"	0.116"	F							No. 2	32	82°	Standard	16 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000
		3/4"	0.362"	0.116"	F							No. 2	24	82°	Standard	17 Ga.	Round	ASME B18.6.3, SAE J933	100	000000000	00000
		3/4"	0.362"	0.116"	F							No. 2	32	82°	Standard	17 Ga.	Round	ASME B18.6.3, SAE J933	100	000000000	00000
		1"	0.362"	0.116"	F							No. 2	24	82°	Standard	17 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000
		1"	0.362"	0.116"	F							No. 2	32	82°	Standard	17 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000
		1 1/4"	0.362"	0.116"	F							No. 2	24	82°	Standard	17 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000
		1 1/2"	0.362"	0.116"	F							No. 2	24	82°	Standard	17 Ga.	Round	ASME B18.6.3, SAE J933	50	000000000	00000
		1 1/2"	0.362"	0.116"	F							No. 2	32	82°	Standard	16 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000


		2"	0.362"	0.116"	F							No. 2	24	82°	Standard	17 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
		2 1/2"	0.362"	0.116"	F							No. 2	24	82°	Standard	17 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000




				No. 12 Screw Size

				3/4"	0.412"	0.132"	F					No. 3	24	82°	Standard	8 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	0000


				1"	0.412"	0.132"	F					No. 3	24	82°	Standard	8 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
				1 1/4"	0.412"	0.132"	F					No. 3	24	82°	Standard	8 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
				1 1/2"	0.412"	0.132"	F					No. 3	24	82°	Standard	8 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000




						1/4" Screw Size

						5/8"	0.477"	0.153"	F			No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	0000


						3/4"	0.477"	0.153"	F			No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
						7/8"	0.477"	0.153"	F			No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
						1"	0.477"	0.153"	F			No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
						1 1/4"	0.477"	0.153"	F			No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
						1 1/2"	0.477"	0.153"	F			No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
						1 3/4"	0.477"	0.153"	F			No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
						2"	0.477"	0.153"	F			No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
						2 1/4"	0.477"	0.153"	F			No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	10	000000000	00000
						2 1/2"	0.477"	0.153"	F			No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	25	000000000	00000
						3"	0.477"	0.153"	F			No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	10	000000000	00000


						3 1/2"	0.477"	0.153"	F	No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	10	000000000	00000
						4"	0.477"	0.153"	F	No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	10	000000000	00000
						4 1/2"	0.477"	0.153"	F	No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	5	000000000	0000
						5"	0.477"	0.153"	F	No. 3	20	82°	Standard	1 Ga.	Round	ASME B18.6.3, SAE J933	5	000000000	00000




								5/16" Screw Size

3/4"								0.597"	0.191"	F	No. 4	18	82°	Standard	L	Round	ASME B18.6.3, SAE J933	10	000000000	00000


1"	0.597"							0.191"	F	No. 4	18	82°	Standard	L	Round	ASME B18.6.3, SAE J933	10	000000000	00000
1 1/4"	0.597"							0.191"	F	No. 4	18	82°	Standard	L	Round	ASME B18.6.3, SAE J933	10	000000000	00000
1 1/2"	0.597"							0.191"	F	No. 4	18	82°	Standard	L	Round	ASME B18.6.3, SAE J933	10	000000000	00000
2"	0.597"							0.191"	F	No. 4	18	82°	Standard	L	Round	ASME B18.6.3, SAE J933	5	000000000	00000
2 1/2"	0.597"							0.191"	F	No. 4	18	82°	Standard	L	Round	ASME B18.6.3, SAE J933	5	000000000	00000
3"	0.597"							0.191"	F	No. 4	18	82°	Standard	L	Round	ASME B18.6.3, SAE J933	5	000000000	00000
3 1/2"	0.597"							0.191"	F	No. 4	18	82°	Standard	L	Round	ASME B18.6.3, SAE J933	5	000000000	00000




								3/8" Screw Size

								3/4"	0.717"	0.23"	F	No. 4	16	82°	Standard	T	Round	ASME B18.6.3, SAE J933	10	000000000	00000


								1"	0.717"	0.23"	F	No. 4	16	82°	Standard	T	Round	ASME B18.6.3, SAE J933	5	000000000	00000
								2"	0.717"	0.23"	F	No. 4	16	82°	Standard	T	Round	ASME B18.6.3, SAE J933	5	000000000	00000
								2 1/2"	0.717"	0.23"	F	No. 4	16	82°	Standard	T	Round	ASME B18.6.3, SAE J933	5	000000000	00000
								3"	0.717"	0.23"	F	No. 4	16	82°	Standard	T	Round	ASME B18.6.3, SAE J933	1	000000000	0000
		4"						0.717"	0.23"	F	No. 4	16	82°	Standard	T	Round	ASME B18.6.3, SAE J933	1	000000000	00000
		5"	0.717"					0.23"	F	No. 4	16	82°	Standard	T	Round	ASME B18.6.3, SAE J933	1	000000000	00000




								1/2" Screw Size

								1 1/2"	0.815"	0.223"	F	No. 4	13	82°	Standard	29/64"	Round	ASME B18.6.3, SAE J933	1	000000000	00000

Square-Neck Flat-Head Plow Bolts


	Fully Threaded	Partially Threaded

Used on heavy equipment, such as plows, these bolts have a smooth, flat head that's angled underneath to sit flush within countersunk holes. A square neck keeps them from turning when tightening a nut. The zinc plating provides corrosion resistance in wet environments. Material meets SAE J429 specifications for quality. Dimensions meet ASME B18.9 specifications. Length is measured from the top of the head. Head height includes the neck.

					Head
	Lg.	Threading	Min. Thread Lg.	Thread Spacing	Dia.	Ht.	Countersink Angle	Neck Wd.	Tensile Strength, psi	Specs. Met	Pkg. Qty.		Pkg.
Zinc-Plated SAE Grade 5 Steel







				3/8"-16 Threads

				1"	Fully Threaded	—	Coarse	0.708"	0.312"	82°	0.39"	120,000	ASME B18.9, SAE J429	50	000000000	000000


				1 1/4"	Fully Threaded	—	Coarse	0.708"	0.312"	82°	0.39"	120,000	ASME B18.9, SAE J429	10	000000000	0000
				1 1/2"	Fully Threaded	—	Coarse	0.708"	0.312"	82°	0.39"	120,000	ASME B18.9, SAE J429	10	000000000	0000
				2"	Fully Threaded	—	Coarse	0.708"	0.312"	82°	0.39"	120,000	ASME B18.9, SAE J429	25	000000000	0000
				2 1/4"	Fully Threaded	—	Coarse	0.708"	0.312"	82°	0.39"	120,000	ASME B18.9, SAE J429	25	000000000	00000
				3"	Partially Threaded	1"	Coarse	0.708"	0.312"	82°	0.39"	120,000	ASME B18.9, SAE J429	10	000000000	0000




						7/16"-14 Threads

						1 1/2"	Fully Threaded	—	Coarse	0.826"	0.364"	82°	0.45"	120,000	ASME B18.9, SAE J429	25	000000000	00000


						2"	Fully Threaded	—	Coarse	0.826"	0.364"	82°	0.45"	120,000	ASME B18.9, SAE J429	10	000000000	0000
						2 1/2"	Fully Threaded	—	Coarse	0.826"	0.364"	82°	0.45"	120,000	ASME B18.9, SAE J429	5	000000000	0000
						3"	Fully Threaded	—	Coarse	0.826"	0.364"	82°	0.45"	120,000	ASME B18.9, SAE J429	5	000000000	0000




								1/2"-13 Threads

								1 1/2"	Fully Threaded	—	Coarse	0.945"	0.417"	82°	0.52"	120,000	ASME B18.9, SAE J429	10	000000000	0000


								1 3/4"	Fully Threaded	—	Coarse	0.945"	0.417"	82°	0.52"	120,000	ASME B18.9, SAE J429	10	000000000	0000
								2"	Fully Threaded	—	Coarse	0.945"	0.417"	82°	0.52"	120,000	ASME B18.9, SAE J429	10	000000000	0000
								2 1/2"	Fully Threaded	—	Coarse	0.945"	0.417"	82°	0.52"	120,000	ASME B18.9, SAE J429	10	000000000	0000
								3"	Fully Threaded	—	Coarse	0.945"	0.417"	82°	0.52"	120,000	ASME B18.9, SAE J429	10	000000000	00000
								4"	Fully Threaded	—	Coarse	0.945"	0.417"	82°	0.52"	120,000	ASME B18.9, SAE J429	10	000000000	00000




										5/8"-11 Threads

										2"	Fully Threaded	—	Coarse	1.147"	0.506"	82°	0.64"	120,000	ASME B18.9, SAE J429	1	000000000	0000


										2 1/2"	Partially Threaded	1 1/2"	Coarse	1.147"	0.506"	82°	0.64"	120,000	ASME B18.9, SAE J429	1	000000000	0000
										3"	Partially Threaded	1 1/2"	Coarse	1.147"	0.506"	82°	0.64"	120,000	ASME B18.9, SAE J429	1	000000000	0000




												3/4"-10 Threads

												3"	Partially Threaded	1 3/4"	Coarse	1.303"	0.541"	82°	0.77"	120,000	ASME B18.9, SAE J429	1	000000000	0000

Key-Locking-Neck Flat-Head Plow Bolts


	Partially Threaded

Also known as reverse-key plow screws and bucket-tooth bolts, these bolts have a locking key that keeps them from turning when tightening a nut. Often used on heavy equipment, such as plows, they have a smooth, flat head that's angled underneath to sit flush within countersunk holes. Material meets SAE J429 specifications for quality. Length is measured from the top of the head.

					Head
	Lg.	Threading	Min. Thread Lg.	Thread Spacing	Dia.	Ht.	Countersink Angle	Tensile Strength, psi	Specs. Met		Each
SAE Grade 8 Steel







				5/8"-11 Threads

				2"	Partially Threaded	1 1/2"	Coarse	1.121"	0.414"	60°	150,000	SAE J429	000000000	00000


				2 1/2"	Partially Threaded	1 1/2"	Coarse	1.121"	0.414"	60°	150,000	SAE J429	000000000	0000
				3"	Partially Threaded	1 1/2"	Coarse	1.121"	0.414"	60°	150,000	SAE J429	000000000	0000
				3 1/2"	Partially Threaded	1 1/2"	Coarse	1.121"	0.414"	60°	150,000	SAE J429	000000000	0000
				4"	Partially Threaded	1 1/2"	Coarse	1.121"	0.414"	60°	150,000	SAE J429	000000000	0000
				5"	Partially Threaded	1 1/2"	Coarse	1.121"	0.414"	60°	150,000	SAE J429	000000000	0000




						3/4"-10 Threads

						3"	Partially Threaded	1 3/4"	Coarse	1.277"	0.44"	60°	150,000	SAE J429	000000000	0000


						3 1/2"	Partially Threaded	1 3/4"	Coarse	1.277"	0.44"	60°	150,000	SAE J429	000000000	0000
						4"	Partially Threaded	1 3/4"	Coarse	1.277"	0.44"	60°	150,000	SAE J429	000000000	0000
						4 1/2"	Partially Threaded	1 3/4"	Coarse	1.277"	0.44"	60°	150,000	SAE J429	000000000	00000
						5"	Partially Threaded	1 3/4"	Coarse	1.277"	0.44"	60°	150,000	SAE J429	000000000	00000
						6"	Partially Threaded	1 3/4"	Coarse	1.277"	0.44"	60°	150,000	SAE J429	000000000	00000




								7/8"-9 Threads

								3 1/2"	Partially Threaded	2"	Coarse	1.516"	0.616"	60°	150,000	SAE J429	000000000	00000


								4"	Partially Threaded	2"	Coarse	1.516"	0.616"	60°	150,000	SAE J429	000000000	00000
								4 1/2"	Partially Threaded	2"	Coarse	1.516"	0.616"	60°	150,000	SAE J429	000000000	00000